what changes with lower frequency on Antminer S1 and how to do?

byt411

hero member

Activity: 798

Merit: 1000

Yes, lowering the frequency will lower the heat, since you're essentially lowering its hashrate, and that makes it consume less electricity, so it will produce less heat.

TLDR: It does 3 things.

1. Reduce Hashrate.
2. Reduce Heat/Temperature.
3. Reduce Electricity Consumption.

kanazawa

hero member

Activity: 756

Merit: 500

Yeah, I think low frequency generates low heat, 'cause when you change the frequency to 393 the system almost burn, the temperature reachs 60°C when the antminer is indoor; so, I was thinking if I change the frequency to 300 i.e the fans will work in a lower speed because the temperature of the whole system is also lower; you know... like a cicle.

monkeynutts

full member

Activity: 139

Merit: 100

think he wants lower clock speed so lower power and heat, slower fan speed can deal with

hotwired007

hero member

Activity: 585

Merit: 500

I dont think adjusting the chip speed will make any difference to the fan rpm.

kanazawa

hero member

Activity: 756

Merit: 500

Hi guys.

for any of you who got some experience with S1.... what changes with lower frequency on Antminer S1 and how to do?

I mean, I know how to OC it but not decrease the frequency...

I'm asking that 'cause my fan in broken, and I need a cheap fan at least till one original comes from China.

I got a fan from a IBM server and it's type that it's a 2800rpm; but mining with frequency on 350 the fan speed is sometimes 3300rpm.

Decreasing the frequency, I suppose, will be reasonable to lower the fan speed; but I confess... don't know how to do that....

Anyway.. if some one could help, it will be very cool. Wink

Thanks.

Topic: what changes with lower frequency on Antminer S1 and how to do? (Read 1169 times)