Try going negative on core like -200 on core.
0.6 more mhs is not gaining you anything with that reject rate.
This should drop power and heat some...and may be more stable for the gpu.
And yes test tonight on more modest settings. Sometimes slower is better.
Topic: what does mean shares: x/y/z in Pheonixminer (Read 106 times)
1% stale is no issue. You are better in this case to have fewer rejected shares. In the case of the 134/1/81...that 81 is almost 40% of your shares...so 2mhs doesnt help if you are losing 4 out of 10 shares. I would need to know gpu and oc settings to advise what to lower. But definetly too high one or both... core/memory.
hi i use gtx 1060 6gb sc with 2 overclock configs
low config use +0 core clock which it does not crash my computer, + 1000 memory clock
high config use +100 core clock +1000 memory clock
My gtx 1060 is superclocked so i can't increase core clock much without it crash my pc WHEN i work on it
when i work on my computer i use the low config to prevent my pc from crashing it goes for 25.9 mh/s
when i go to sleep i leave my pc on screen saver and i use high config and it did not crash my pc when it's on screen saver. it goes for 26.550 mh/s
so the data i mention 134/1/81 is when it was on the high config
I did'nt test when using low config to check if i have less rejected shares, i'll test this night and see.
1% stale is no issue. You are better in this case to have fewer rejected shares. In the case of the 134/1/81...that 81 is almost 40% of your shares...so 2mhs doesnt help if you are losing 4 out of 10 shares. I would need to know gpu and oc settings to advise what to lower. But definetly too high one or both... core/memory.
134 accepted shares / 1 stale / 81 invalid-rejected
Here is one off a rig of 1070/1080's
Eth speed: 165.945 MH/s, shares: 1015/0/0, time: 6:58
Something is up with your last number...either internet is spotty (wifi is sometimes an issue i prefer ethernet cable) or OC is too high.
Here is one off a rig of 1070/1080's
Eth speed: 165.945 MH/s, shares: 1015/0/0, time: 6:58
Something is up with your last number...either internet is spotty (wifi is sometimes an issue i prefer ethernet cable) or OC is too high.
hi
I use ethernet cable but about oc yes i can say that it's in the very limit of it.
what should i have, invalid-rejected should be 0 or very less number ?
Should i decrease my oc ? core and memory clock ?
If i decrease oc then my mh will decrease too, is it better to have 26.5 mh/s with invalid/rejected shares or 24 mh/s with less invalid/rejected shares ?
for 1 stale i guess ethermine.org "eu1.ethermine.org:14444" does not support long pool i think which lead me to think if i should move to another pool, but 1 stale i think is not bad
thank you in advance
134 accepted shares / 1 stale / 81 invalid-rejected
Here is one off a rig of 1070/1080's
Eth speed: 165.945 MH/s, shares: 1015/0/0, time: 6:58
Something is up with your last number...either internet is spotty (wifi is sometimes an issue i prefer ethernet cable) or OC is too high.
Here is one off a rig of 1070/1080's
Eth speed: 165.945 MH/s, shares: 1015/0/0, time: 6:58
Something is up with your last number...either internet is spotty (wifi is sometimes an issue i prefer ethernet cable) or OC is too high.
Hi
I tryed googling this but i can't seem's to figure out what does values (134/1/81) in Eth speed: 26.225 MH/s, shares: 134/1/81, time: 7:28 mean ?
it grow and when i restart miner it reset (obviously).
Then is it better to let my miner always running or if i restart it for will decrease my earning ? "some time I need to reboot my computer or test new overclocking or another miner".
Best Regards
I tryed googling this but i can't seem's to figure out what does values (134/1/81) in Eth speed: 26.225 MH/s, shares: 134/1/81, time: 7:28 mean ?
it grow and when i restart miner it reset (obviously).
Then is it better to let my miner always running or if i restart it for will decrease my earning ? "some time I need to reboot my computer or test new overclocking or another miner".
Best Regards
Jump to: