Author

Topic: what is the command line to restart miner Claymore's if get incorrect share (Read 144 times)

sr. member
Activity: 588
Merit: 272
⭐⭐⭐⭐⭐
Are you talking about incorrect share or rejected share?

OP thinks re-loading Claymore will fix OP's problem (as shown on the OP's first post) but then OP giving us (3rd post) error message that appears on OP's Claymore:

"GPU #3 got incorrect share. If you see this warning often, make sure you did not overclock it too much!"

So, what was OP talking about is incorrect share.
jr. member
Activity: 269
Merit: 4
The easy fix for “incorrect share” error is to reduce mem clock by 25 for that card.  Should fix the issue...
legendary
Activity: 3808
Merit: 1723
Are you talking about incorrect share or rejected share?

Restarting the miner won't do anything for incorrect shares, it means your memory straps are modded incorrectly and you need to adjust your voltage and clock settings.

If you are talking about submitting rejected shares which sometimes happens in some pools due to bad stratum coding, the pool will automatically kick you off and reconnect you and you will get a new job which shouldn't get any more rejects.

This is very common with the XMR Claymore miners, no real work-around really except waiting until the pool kicks you off and you auto reconnect.
sr. member
Activity: 588
Merit: 272
⭐⭐⭐⭐⭐
To re-load the Claymore config, you can press "r."

You can fix the problem you are facing (incorrect share) with lowering your OC setting. You could try to reduce your OC setting bit by bit (until you get the right one setting) or bring it back to default setting then increase it bit by bit.
newbie
Activity: 152
Merit: 0
"GPU #3 got incorrect share. If you see this warning often, make sure you did not overclock it too much!"
newbie
Activity: 152
Merit: 0
newbie
Activity: 152
Merit: 0
what is the command line to restart miner Claymore's  if get   incorrect share
Jump to: