Topic: What mining software for ati cards do you use? (Read 895 times)
Anybody got any other ideas why it uses two cores all the times?
im still getting 2 cores being used fully with 11.6 drivers.
Though only with crossfire mode turned on, if it turn it off the cpu usage drops a ton but then it only detects one gpu and not both?
Though only with crossfire mode turned on, if it turn it off the cpu usage drops a ton but then it only detects one gpu and not both?
Ah i see, okay thankyou i will try that driver and report back.
Also i just tested cgminer some more, Okay you are right about this being much better. Big thankyou for the suggestion.
I absolutely love how it auto clocks my card if it gets too hot or its not working hard enough, and scales with what im doing, with guiminer i would have to stop it and change the -f setting so it didnt steal all my cycles in a game, but this does it all automatically, thats fantastic.
I can also underclock my ram much further than afterburner will allow me so my temps are much lower too.
Also i just tested cgminer some more, Okay you are right about this being much better. Big thankyou for the suggestion.
I absolutely love how it auto clocks my card if it gets too hot or its not working hard enough, and scales with what im doing, with guiminer i would have to stop it and change the -f setting so it didnt steal all my cycles in a game, but this does it all automatically, thats fantastic.
I can also underclock my ram much further than afterburner will allow me so my temps are much lower too.
11.8 and 11.7 drivers are bugged, they will make the miner use a cpu core
install 11.6 and ta dah problem solved, 0% cpu use or so.
install 11.6 and ta dah problem solved, 0% cpu use or so.
11.8 drivers and cgminer - the best most fully featured mining software out there
https://bitcointalksearch.org/topic/official-cgminer-mining-software-thread-for-linuxwinosxmipsarmr-pi-4110-28402
I'm getting a little more mh/s with that but now its maxing out two cpu cores instead of one :-(https://bitcointalksearch.org/topic/official-cgminer-mining-software-thread-for-linuxwinosxmipsarmr-pi-4110-28402
Also what fan control are you guys using? With my XFX 6870, if I leave fan control on auto, it will stay at 35% fan and let the temp get up to 84 deg C, so I manually set it at 50% to drop the temps to about 78 deg C. What are reasonable maximum temps for 24/7 operation, and will I wear out the fans at a 50% speed 24/7?
I've got it set to auto, which keeps it at around 80% speed. I would doubht they would wear out from being on 24/7, and if they ever did you could just get a replacement cooler for pretty cheap.
11.8 drivers and cgminer - the best most fully featured mining software out there
https://bitcointalksearch.org/topic/official-cgminer-mining-software-thread-for-linuxwinosxmipsarmr-pi-4110-28402
https://bitcointalksearch.org/topic/official-cgminer-mining-software-thread-for-linuxwinosxmipsarmr-pi-4110-28402
If I drop to 11.6 Catalyst drivers will it reduce my MHash/s?
I have 11.8 Catalyst drivers and get good MHash/s but one core is locked full too.
Also what fan control are you guys using? With my XFX 6870, if I leave fan control on auto, it will stay at 35% fan and let the temp get up to 84 deg C, so I manually set it at 50% to drop the temps to about 78 deg C. What are reasonable maximum temps for 24/7 operation, and will I wear out the fans at a 50% speed 24/7?
I have 11.8 Catalyst drivers and get good MHash/s but one core is locked full too.
Also what fan control are you guys using? With my XFX 6870, if I leave fan control on auto, it will stay at 35% fan and let the temp get up to 84 deg C, so I manually set it at 50% to drop the temps to about 78 deg C. What are reasonable maximum temps for 24/7 operation, and will I wear out the fans at a 50% speed 24/7?
Yeah i am using the latest drivers available, and the latest guiminer, my mh/s has gone up with them but one of the cores is still locked at full use all the time with opencl :S
Quote
What mining software for ati cards do you use?
GUIminer with opencl. flags: -v -w128 -f2511.8 driver.
Quote
So i was woundering if there is any miner you would consider the best all around over opencl?
I've tried the phoenix, I receive 25 mhash/s more with opencl.
Quote
At the moment i'm using GUIMiner in opencl mode with good results, but it makes one of my cores locked at full usage all the time.
I've read from people that it is a SDK bug that causes this. If you use 11.7-11.8 driver with the latest GUIMiner with opencl, there is an major increase of mhash/s.
11.8
guiminer
guiminer
cgminer is cool 
Install 11.6 driver, problem solved.
Just woundering what software do you guys use for ati cards?
At the moment i'm using GUIMiner in opencl mode with good results, but it makes one of my cores locked at full usage all the time.
So i was woundering if there is any miner you would consider the best all around over opencl?
At the moment i'm using GUIMiner in opencl mode with good results, but it makes one of my cores locked at full usage all the time.
So i was woundering if there is any miner you would consider the best all around over opencl?
Jump to: