What risers buy | Bitcointalksearch.org

w0lf0.

hero member

Activity: 1050

Merit: 513

thanks for replies guys Wink

have you to suggest one not expensive PSU with 4 connectors 8 pin (4x Msi rx470 need 8 pin supply). 700-800w for 4 undervolted 470 i think is good, i see it: EVGA 750 GQ, 80+ GOLD 750W, can be ok?
Actually i have Corsair CX750M and it's no good has only 2x 8 pin connectors.
Thanks

cryptominer420

sr. member

Activity: 450

Merit: 255

I on;y chain 1 per line from the psu as with 2 undervolted 470's the line starts getting warm dual Mining.

Tmdz

hero member

Activity: 1008

Merit: 1000

Molex ones are fine, just chain 2 of them at most. Well usually the most you can chain is 2 with the way cables are made anyway.

You have to check each and every riser to make sure they work.

China is sloppy with their soldering on risers. One I fixed today had to have at least 8 little solder bridges on the back that made it faulty. Take a knife and clean em up if you need to.

Tummler

newbie

Activity: 53

Merit: 0

I started running 14 of these of two weeks ago, and they have performed flawlessly:

http://www.ebay.com/itm/2016-New-design-stable-version-PCI-express-1x-to-16x-riser-for-ETH-GPU-mining/281383006276?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

I placed two orders, and I received both orders within 3 days of placing my order. Also, the seller was willing to give a slight discount on my second, larger order.

I like this particular riser because it has a 6-pin PCIe power connector. Using this riser in conjunction with my preferred PSU (Corsair AX1200i), I can power 7 cards without using a single splitter or questionable connector. Each plug has its own dedicated cable, and all connectors are 8-pin or 6-pin PCIe connectors.

Prelude

legendary

Activity: 1596

Merit: 1000

Quote from: koody on April 06, 2017, 11:44:32 AM

I use the same risers with rx 480 / 470 over 1 year. You can use then without problem.

No, you haven't. RX480 came out June 29th 2016 and RX470 in July 2016.

Quote from: dagarair on April 06, 2017, 12:24:08 PM

everyone is gonna cry that don't use molex as far as i am concerned I have never had one melt down as long as you keep max of 2 per PSU cable connection

The only RX480 that would be a problem on Molex is the original reference RX480, and even then that should be fine with since AMD fixed the PCI-e clot power issue with a driver release. Yes, 2 GPUs per Molex chain is acceptable. I'd keep it to 1 GPU per chain with a RX480 reference card.

dagarair

sr. member

Activity: 847

Merit: 383

everyone is gonna cry that don't use molex as far as i am concerned I have never had one melt down as long as you keep max of 2 per PSU cable connection

koody

member

Activity: 114

Merit: 20

I use the same risers with rx 480 / 470 over 1 year. You can use then without problem.

w0lf0.

hero member

Activity: 1050

Merit: 513

Hi guys sorry for my english Wink

i need help for my mining setup (mobo z97 anniversary),i bought 4x Msi rx470 and bought these risers, model AC330 on Ebay:

they are 003 version right? it's ok for rx 470?
i see only after exist risers 007 version.
it is true that connecting bad gpu and riser cables can burn both? how can I connect all correctly?
very thanks Wink

Topic: What risers buy (Read 1016 times)