Author

Topic: Which board and CPU for 4x RX580 8GB? (Read 126 times)

legendary
Activity: 1834
Merit: 1131
March 19, 2021, 11:44:29 AM
#11
thanks for the information guys. If i find a suitable board i will need to put everything into one chassis. I cannot have an open rig with risers for multiple reasons.
so that means I would need a board with 8 PCIe slots, because the RX580 will cover two of them? I assume this will make my search a bit harder?

If for some reasons I will be able to use risers, which ones would be recommended? I heard they vary quite much in stability and performance?
If you cannot use an open installation of video cards, then buy a case like this.
The case can be equipped with raisers.

In this case, you do not need to pay dearly for a special fee.
An inexpensive pre-owned ASUS 970 PRO GAMING motherboard is suitable for a fascinating assembly.

member
Activity: 252
Merit: 13
March 19, 2021, 04:30:20 AM
#10
Buy riser cables, they work in any PC PCIe slots, x16,x8 or x4 it doesn't matter and won't stop the gpus from getting full hashrate when mining
hero member
Activity: 756
Merit: 501
March 19, 2021, 04:25:48 AM
#9
Well you could mount the cards with risers in a large PC case in a creative way if it has to be stealthy. There are very wide mining motherboards with 8 PCI-E slots where you can directly mount 8 GPUs, but they are weird, kinda expensive (compared to old used hardware) and can be problematic in Windows.
As for risers, just make sure to not buy the ones powered with SATA as they are prone to fire and other fails. Molex-4-Pin should be fine if your PSU can handle the load, otherwise go for risers with a PCI-E power connector and power them with a server PSU + breakout board. Performance and stability should be fine if they are built correctly. Buy from reputable mining shops instead of eBay or Amazon if you are unsure, slightly more expensive but they won't sell you shit.
newbie
Activity: 9
Merit: 0
March 19, 2021, 03:05:01 AM
#8
thanks for the information guys. If i find a suitable board i will need to put everything into one chassis. I cannot have an open rig with risers for multiple reasons.
so that means I would need a board with 8 PCIe slots, because the RX580 will cover two of them? I assume this will make my search a bit harder?

If for some reasons I will be able to use risers, which ones would be recommended? I heard they vary quite much in stability and performance?
member
Activity: 375
Merit: 15
$CYBERCASH METAVERSE
March 19, 2021, 12:13:42 AM
#7
Hey mates,

what motherboard would you recommend to host 4 RX580 GPUs? I often see board that are equipped with one PCIe 16x slot, and a couple of other ports with "only" 8x or worse. Is this really something I should care?
Does this affect mining/hashrates or can I just ignore that at all?

Thanks in advacne for your input and feedback
roat
Either 8x or 1x slots they will work with risers, I'm using a old dell desktop for mining and it has only single x16 PCIe slot and 4 1x slots so I run 5 GPUs on this motherboard for mining and it works, just grab some risers and you are good to go.
full member
Activity: 1424
Merit: 225
March 18, 2021, 07:39:32 PM
#6
If you only need 4 slots you don't need a mining board, any motherboard with 4 PCIe slots will do.
hero member
Activity: 756
Merit: 501
March 18, 2021, 06:53:00 PM
#5
"only" 8x or worse. Is this really something I should care?
Does this affect mining/hashrates or can I just ignore that at all?
Nope, the PCI-E bus speed doesn't affect hashrate for most if not all cryptocoins. That's why many people use x1->x16 risers and still get the full hashrate. As long as the CPU isn't super old, it won't make a difference either, an ancient Core2Duo will be fine.  Grin
full member
Activity: 621
Merit: 108
March 18, 2021, 06:49:51 PM
#4
The above mentioned boards are good, it you can't find them look for Asus Prime Z270P or Z370P. Or buy a dedicated mining board, these are usually a bit cheaper than consumer products.
full member
Activity: 621
Merit: 108
March 18, 2021, 06:49:26 PM
#3
The above mentioned boards are good, it you can't find them look for Asus Prime Z270P or Z370P. Or buy a dedicated mining boars, these are usually a bit cheaper than consumer products.
hero member
Activity: 789
Merit: 501
March 18, 2021, 06:02:28 PM
#2
One 16x slot is great for testing a GPU in the slot.
But when you build the rig, you will use risers so 1x slots are OK (PCIE ou MOLEX powered risers ... avoid SATA connectors)

You can probably find a cheap used motherboard like a H81 PRO BTC or H110 PRO BTC or H110-D3A. I used both and they are doing great
newbie
Activity: 9
Merit: 0
March 18, 2021, 04:46:09 PM
#1
Hey mates,

what motherboard would you recommend to host 4 RX580 GPUs? I often see board that are equipped with one PCIe 16x slot, and a couple of other ports with "only" 8x or worse. Is this really something I should care?
Does this affect mining/hashrates or can I just ignore that at all?

Thanks in advacne for your input and feedback
roat
Jump to: