Topic: Which Graphics Card and PSU for Scrypt Mining ? (Read 2742 times)
Got a Gigabyte GV-R928XOC-3GD-GA ED 3G DVI-I HDMI 2x miniDP
I'd second comments on the 270's. I just put 2 of the 270x's in and I love them. If I had it to do over I would probably get regular 270's for the reasons stated above. Bang for the buck though, they were the best I could find after doing some research. They're also much more readily available, without the $100 or more mark-up the 280x and 290x's have seen. Good luck to ya though whatever you decide.
270s are cool
I'd second comments on the 270's. I just put 2 of the 270x's in and I love them. If I had it to do over I would probably get regular 270's for the reasons stated above. Bang for the buck though, they were the best I could find after doing some research. They're also much more readily available, without the $100 or more mark-up the 280x and 290x's have seen. Good luck to ya though whatever you decide.
can u fit 6 x r9 270 into 1 rig?
Yeah, you as long as you have the right power supply with LOTS OF 12V RAIL AMPERAGE and the right risers to support 6 cards. It's not much harder than any other mining rig to set up, but the power supply will be running at nearly 90% 12V rail rated amps. Be very, very careful xD
Right now I'm aiming at only 1x Decent GPU & a Bigger PSU than what I have now.
I'm pretty sure I have decided on a Sapphire ATI HD 7970 OC EDITION V2 PCI-E 3.0, 3GB 384-bit GDDR5, 1000/5800 Mhz
And a Corsair 750W ATX Modular Power Supply, 80 PLUS Bronze Certified, 2x PCI-E
I'm pretty sure I have decided on a Sapphire ATI HD 7970 OC EDITION V2 PCI-E 3.0, 3GB 384-bit GDDR5, 1000/5800 Mhz
And a Corsair 750W ATX Modular Power Supply, 80 PLUS Bronze Certified, 2x PCI-E
can u fit 6 x r9 270 into 1 rig?
I would buy the 270's (not X) as they're readily available and only consume 150 watts while doing 450Kh/s. They are just down clocked 270X's (no shader or logic unit differences). I have a few of them and they run amazingly while consuming little power. As for the power supply, I simply have a raidmax 1000W 80+ GOLD PSU. It's a cheap, reliable, efficient PSU and I highly recommend it.
Any recommendations ?
I'm keen to get my small rig up & running !
I'm keen to get my small rig up & running !
Hey guys,
I'm just wondering out of the following which Hardware to get for Scrypt Mining, keep in mind my motherboard is a Gigabyte GA-EP45-DS3 (socket 775) with 3 GB RAM BUT compatible with the following:
Graphics Card:
Sapphire ATI HD 7950 VaporX-OC w BOOST PCI-E 3.0 3GB GDDR5
Sapphire ATI HD 7970 OC EDITION V2 PCI-E 3.0, 3GB 384-bit GDDR5, 1000/5800 Mhz, D-DVI, HDMI, 2x
Asus R9270X-DC2T-2GD5 DC 2 PCI-E 3.0 2GB GDDR5, DVI-D/ HDMI/ D-SUB, DX11
Sapphire TOXIC R9 270X 2GB GDDR5 WITH BOOST; 1100 ( Boost 1150) MHz/6000MHz; DVI-I/DVI-D/HDMI/D
Gigabyte GV-R928XOC-3GD-GA ED 3G DVI-I HDMI 2x miniDP
From my understanding the Sapphire ATI HD 7970 OC EDITION V2 PCI-E 3.0, 3GB 384-bit GDDR5, 1000/5800 Mhz, D-DVI, HDMI, 2x or the Gigabyte GV-R928XOC-3GD-GA ED 3G DVI-I HDMI 2x miniDP would be the best though Any help would be greatly appreciated
I'm just wondering out of the following which Hardware to get for Scrypt Mining, keep in mind my motherboard is a Gigabyte GA-EP45-DS3 (socket 775) with 3 GB RAM BUT compatible with the following:
Graphics Card:
Sapphire ATI HD 7950 VaporX-OC w BOOST PCI-E 3.0 3GB GDDR5
Sapphire ATI HD 7970 OC EDITION V2 PCI-E 3.0, 3GB 384-bit GDDR5, 1000/5800 Mhz, D-DVI, HDMI, 2x
Asus R9270X-DC2T-2GD5 DC 2 PCI-E 3.0 2GB GDDR5, DVI-D/ HDMI/ D-SUB, DX11
Sapphire TOXIC R9 270X 2GB GDDR5 WITH BOOST; 1100 ( Boost 1150) MHz/6000MHz; DVI-I/DVI-D/HDMI/D
Gigabyte GV-R928XOC-3GD-GA ED 3G DVI-I HDMI 2x miniDP
From my understanding the Sapphire ATI HD 7970 OC EDITION V2 PCI-E 3.0, 3GB 384-bit GDDR5, 1000/5800 Mhz, D-DVI, HDMI, 2x or the Gigabyte GV-R928XOC-3GD-GA ED 3G DVI-I HDMI 2x miniDP would be the best though Any help would be greatly appreciated
Jump to: