always the ones with metal around the edge of the hole, plastic for non metal edged holes...
Thank you for the straightforward answer
Topic: Which holes are for mounting the H81 (Read 200 times)
Thank you for the straightforward answer
If given a choice between holes I always go for the one in the rear. I find that it tends to be tighter and leads to less long-term consequences. Clearly the A hole is the right choice here.
-TBT
-TBT
always the ones with metal around the edge of the hole, plastic for non metal edged holes...
Hey there,
Just getting started with my first gpu build and am wondering the same thing.
What holes did you use to mount the MOBO to your frame? Any other tips ornissues yoy ran j to would be grest to know about as well.
Thanks, hope your build went well for you
Just getting started with my first gpu build and am wondering the same thing.
What holes did you use to mount the MOBO to your frame? Any other tips ornissues yoy ran j to would be grest to know about as well.
Thanks, hope your build went well for you
hmmm, from the picture id say A, what is that around the B hole? Tin? Is it leading somewhere on the other side? But you specify that there is only 2 A holes, thats way to little. No you should not have to insulate the screws. Thats why im asking about the B hole.
I saw from the back; they are leading to nowhere. Those holes are isolated.
It's logical, it should be 'B', 7 Screws and has grounding, typical screws for the board is insulated
like this, the gold one is for chassis
A are for plastic mounters, B for "steal" + screw. It also depende of your case, but I would use B.
B are isolated to ground.
https://gyazo.com/ef0bc8d8d3fecfcba13d4c5fe9dfa78c
B are isolated to ground.
https://gyazo.com/ef0bc8d8d3fecfcba13d4c5fe9dfa78c
hmmm, from the picture id say A, what is that around the B hole? Tin? Is it leading somewhere on the other side? But you specify that there is only 2 A holes, thats way to little. No you should not have to insulate the screws. Thats why im asking about the B hole.
I saw from the back; they are leading to nowhere. Those holes are isolated.
hmmm, from the picture id say A, what is that around the B hole? Tin? Is it leading somewhere on the other side? But you specify that there is only 2 A holes, thats way to little. No you should not have to insulate the screws. Thats why im asking about the B hole.
Hi,
Please let me know what holes are used for mounting the motherboard (this is AsRock H81 PRO BTC R2.0) on the horizontal wooden plank.
The number of:
> A holes are 2
> B holes are 7
Do I need to insulate the screws if putting in either of these holes.
Thanking you in anticipation.
Regards,
Rizwan
Please let me know what holes are used for mounting the motherboard (this is AsRock H81 PRO BTC R2.0) on the horizontal wooden plank.
The number of:
> A holes are 2
> B holes are 7
Do I need to insulate the screws if putting in either of these holes.
Thanking you in anticipation.
Regards,
Rizwan
Jump to: