There are many devices available on market but if you want to mining bitcoin please you need atleast better gpu as like 8gb ddr5 or more gpus for better mining purpose, contact me for more details i can discuss with you
TY:- https://moviesforeview.com/moviesflix/
Topic: Which is the best mining hardware ? (Read 222 times)
Before you proceed to buying hardware for the next mining use, you should pay attention to temperature and pressure needs assessment, electricity consumption, and this hashing power is important to sterilize the current you use on the device so it doesn't burn easily.
Try to check Bitcoin miner hardware like:
* Pangolin mining 12Th/s.
* Antminer S9 13.5TH/s.
* Dragon Mint T1 15TH/s.
* Avalon6 3.5 TH/s.
You can choose one of them for you to use the minister is often used quite practical and thick, not flammable.
Between the four also differ in quality and also voltage, you can adjust one of them for your use.
Try to check Bitcoin miner hardware like:
* Pangolin mining 12Th/s.
* Antminer S9 13.5TH/s.
* Dragon Mint T1 15TH/s.
* Avalon6 3.5 TH/s.
You can choose one of them for you to use the minister is often used quite practical and thick, not flammable.
Between the four also differ in quality and also voltage, you can adjust one of them for your use.
So at the op what is it you want to spend?
500
1000
2000
500
1000
2000
An Avalon A8 series can run at 9TH around 900W - great quiet room heater in winter if you slow the fan down 
And in LowPower mode with the rest default settings it should be fine not getting too hot.
It's original firmware allows you to adjust it easily.
... and of course you can use the RPi, power supply and cables that was running the A7 before
Just get the firmware direct from Canaan themselves who makes the miner:
https://download.canaan-creative.com/
And in LowPower mode with the rest default settings it should be fine not getting too hot.
It's original firmware allows you to adjust it easily.
... and of course you can use the RPi, power supply and cables that was running the A7 before
Just get the firmware direct from Canaan themselves who makes the miner:
https://download.canaan-creative.com/
Hello guys , Which is the best hardware for mining Bitcoin at this time
i used to have an avalon 741 7.3 TH/s but it got burned due to heat !
What do u suggest to buy which is sable and not get heated to much
i used to have an avalon 741 7.3 TH/s but it got burned due to heat !
What do u suggest to buy which is sable and not get heated to much
I have zero idea of your setup and or your requirements.
You could do a braiins s9 clocked to 9th or 10 th it would run quiet and use 750-800 watts.
Plenty of people have s9's on ebay at 500 usd .
With a psu.
https://www.ebay.com/itm/154523117149?
https://www.ebay.com/itm/133813605630?
these can be programed with braiins run at 10th and 800 watts they should work well
not I do not know the sellers but this is about what 500 usd will get for you.
What the heck did you do to that poor A7? I've ran them all from A721 up to currently A10's and all have been damn near bulletproof despite some running in very hot (>95F) areas.
That said, ALL miners run hot especially these days. Personally I'd stick with Avalons like the A11 or A12's.
That said, ALL miners run hot especially these days. Personally I'd stick with Avalons like the A11 or A12's.
Hello guys , Which is the best hardware for mining Bitcoin at this time
i used to have an avalon 741 7.3 TH/s but it got burned due to heat !
What do u suggest to buy which is sable and not get heated to much
i used to have an avalon 741 7.3 TH/s but it got burned due to heat !
What do u suggest to buy which is sable and not get heated to much
Jump to: