Topic: win 7 x64 , 4 cards fine, last one (fifth) with code 43 :(. Bounty (Read 2077 times)
I had the same problem. I had 5 cards and all were detected but 1 of them would not load the drivers. Updated to Win 8.1 and everything worked. I had tried everything up to that point. (old drivers, new drivers, switching cards and pcie lanes.)
January 27, 2014, 12:59:18 PM
Hmm, interesting. I have 3 R7990's and 2 work sweet (4 gpu's). Since 1 7990 is 2 gpu's it would make sence why I've been fighting with getting the 3'rd one working (total of 6 gpu's), never knew there was a limit. I'll go from here! thx
January 20, 2014, 02:43:16 PM
Catalists 12.6 + SDK 12.7 + cgminer 3.7.0 (not 3.7.2) = 5gpu on win 7 
DONE BUAHAHA
r9780x is seen as r7990
DONE BUAHAHA
r9780x is seen as r7990
edit
r9 280x is seen as r7990 but hashrate dropped from 700 to 550 k/hash as CCC 12.6 do not support r9 280 x .
Kind regards
novymivo
January 19, 2014, 11:16:06 PM
Good to hear and I'll keep this thread for reference for the sdk/catalyst driver combo if I decide to build a 5+ card rig. All my rigs run 3-4 cards....
January 18, 2014, 11:54:55 AM
Catalists 12.6 + SDK 12.7 + cgminer 3.7.0 (not 3.7.2) = 5gpu on win 7
DONE BUAHAHA
r9780x is seen as r7990
DONE BUAHAHA
r9780x is seen as r7990
January 17, 2014, 04:57:10 PM
https://bitcointalksearch.org/topic/can-you-run-5-gpus-on-windows-7-x64-103244
It seems to be board dependent on boards tha twill run more than 4 gpu cores from this thread. I didn't look specifically for your board, but catalyst driver, sdk, motherboard all seem to factor in.
It seems to be board dependent on boards tha twill run more than 4 gpu cores from this thread. I didn't look specifically for your board, but catalyst driver, sdk, motherboard all seem to factor in.
January 17, 2014, 04:17:34 PM
If you are sure the card is good ie tested in another slot and you know the slot is good ie tested another working card in that slot then it should not be the drivers or sdk. It could be your Intensity or thread concurrency, but start with hardware info:
How much system memory and what is the power supply?
-pcie slots checkedHow much system memory and what is the power supply?
-risers checked
-gpu-s checked
-psu lepa 1600
-4gb dual ddr3 or something like that
When I try to connect fifth card then one is off with error 43 is visible in devices list but off due to error 43.
I ve been told that win 7 support only 4 gpu like r9 280x.
I am downloading now catalyst drivers 12.6 - someone gave me that advice.
Any more info will be appreciated
Kind regards
January 17, 2014, 03:04:46 PM
If you are sure the card is good ie tested in another slot and you know the slot is good ie tested another working card in that slot then it should not be the drivers or sdk. It could be your Intensity or thread concurrency, but start with hardware info:
How much system memory and what is the power supply?
How much system memory and what is the power supply?
January 17, 2014, 10:29:53 AM
hi all
I making my first rig with 5 gpus.
I used amd r9 280x with catalist 13.06 beta, but last one card got code 43.
Card is ok, slots as well, motherboards as well asrock btc 81.
Which drivers i should use ? do I need SDK or what ??
Tip will be given to for right advice.
Kind regards
I making my first rig with 5 gpus.
I used amd r9 280x with catalist 13.06 beta, but last one card got code 43.
Card is ok, slots as well, motherboards as well asrock btc 81.
Which drivers i should use ? do I need SDK or what ??
Tip will be given to for right advice.
Kind regards
Jump to: