Topic: Windows 10 and AMD adrenalin 18.5.1 (Read 221 times)
if you use last windows 10 1809 you need to use driver 18.10.1
I have similar problem although I use the Windows 8.1 and 17.17.1.
The clock speed kept at 300/150MHz when I run the XMR-Stak. There is no use if I switch to compute mode using the switcher mentioned earlier in the response.
The clock speed kept at 300/150MHz when I run the XMR-Stak. There is no use if I switch to compute mode using the switcher mentioned earlier in the response.
Just turn on the –y 1 option in Claymore miner or Phoenix miner. You can also use the AMD-Compute-Switcher program, available for download in https://bitcointalksearch.org/topic/tool-amd-compute-switcher-for-switch-automatically-to-compute-mode-2815803.
Apply the tool AMD-Compute-Switcher as indicated by leonix007.
It Works very well.
It Works very well.
you may want to try this tool
https://bitcointalksearch.org/topic/tool-amd-compute-switcher-for-switch-automatically-to-compute-mode-2815803
I also use the 18.5.1. When I run the mining program, the clock of the R9 390 stuck at 300/150MHz which is the idle core/mem speed.
I have tried several programs such as XMR-Stak, SRB miner and Claymore ZCash miner. Same low clock speed.
I have tried several programs such as XMR-Stak, SRB miner and Claymore ZCash miner. Same low clock speed.
There is no compute mode switch in the newer drivers, it's automatic.
I have upgraded to the latest Windows 10 from Windows 8.1 and installed the adrenalin 18.5.1. However, in the Global setting of the AMD setting panel, I cannot find the graphics workload panel. Any reason for that? So I cannot switch to compute mode.
Shall I have a clean install of the Windows 10?
Shall I have a clean install of the Windows 10?
Jump to: