Windows 7 do not see my R9 280x (sapphire). :(((

novymivo

sr. member

Activity: 266

Merit: 250

Quote from: Gator-hex on January 16, 2014, 01:53:00 PM

Check Windows device manager and see in the onboard VGA has been assigned a driver.
If it has, right click it, and select "disable", then reboot.

Another problem it could be is that your graphics card is an OEM model.
If so you cannot use the generic AMD catalyst divers you have to use the drivers from your computer/card manufacturer.
Try the driver disk supplied in the box, if that don't work try and download the latest one from your card manufacturer.

problem resolved. what I did.
First . I updated windows 7
Second : I removed one card from pcie slot ( long one) and used another one with rinser 1x16x since then all gpu's were detected.
Thank you for all ideas.
kind regards
novymivo

Gator-hex

hero member

Activity: 490

Merit: 500

Check Windows device manager and see in the onboard VGA has been assigned a driver.
If it has, right click it, and select "disable", then reboot.

Another problem it could be is that your graphics card is an OEM model.
If so you cannot use the generic AMD catalyst divers you have to use the drivers from your computer/card manufacturer.
Try the driver disk supplied in the box, if that don't work try and download the latest one from your card manufacturer.

novymivo

sr. member

Activity: 266

Merit: 250

Quote from: Gator-hex on January 16, 2014, 12:54:58 PM

Quote

On bamt everything was fine, but i need to go on windows as i want to try underclock etc.

There should be an Ati Control Panel in the BAMT menus.

Anyway Windows...

Make sure you graphics card is in slot 0 and has power cables. Check your motherboard manual, but it's usually the 16x slot nearest the CPU.

Also disable the onboard graphics in the motherboard BIOS.

Make sure you monitor lead is plugged in the graphics card and not your motherboard vga.

Then it should work.

-gpu is in slot 0 16x
-onboard gpu is disabled in bios
-I do not have monitor with dvi plug, so I used HDMI cable- plugged,
STILL do not work Sad

.

Gator-hex

hero member

Activity: 490

Merit: 500

Quote

On bamt everything was fine, but i need to go on windows as i want to try underclock etc.

There should be an Ati Control Panel in the BAMT menus.

Anyway Windows...

Make sure you graphics card is in slot 0 and has power cables. Check your motherboard manual, but it's usually the 16x slot nearest the CPU.

Also disable the onboard graphics in the motherboard BIOS.

Make sure you monitor lead is plugged in the graphics card and not your motherboard vga.

Then it should work.

novymivo

sr. member

Activity: 266

Merit: 250

Hi all.
I need help.
I just installed win 7 with one r9 280x on pci-e slot, but windows do not see my card at all , even no messages about new hardware
I even can't instal Catalist drivers , as the are crashing in the middle on the installation.
On bamt everything was fine, but i need to go on windows as i want to try underclock etc.
Maybe i should bridge Dvi slots on R9 card or so ??
Motherboard is ashrock btc 81.
Pci-express got priority in bios
What to do ??

Topic: Windows 7 do not see my R9 280x (sapphire). :((( (Read 2134 times)