[WTB] Looking for DEAD mining hardware! What have you got? post here or PM

helipotte

hero member

Activity: 650

Merit: 500

Pick and place? I need more coffee.

Quote from: Indianacoin on February 12, 2016, 02:57:13 PM

I am wiling to sell 2 of my Antminer S3+, a PSU along with 1 Antminer U2 (for free).
For pictures you can look into my selling thread - https://bitcointalksearch.org/topic/wts-2-antminer-s3-1-antminer-u2-for-free-1361455

But at least I can state that they are not dead.
They are fully functional. Just dont want them anymore.

Pm me if you are interested.

Thanks for the offer, however I am looking for newer dead/broken hardware.

Indianacoin

sr. member

Activity: 406

Merit: 252

I am wiling to sell 2 of my Antminer S3+, a PSU along with 1 Antminer U2 (for free).
For pictures you can look into my selling thread - https://bitcointalksearch.org/topic/wts-2-antminer-s3-1-antminer-u2-for-free-1361455

But at least I can state that they are not dead.
They are fully functional. Just dont want them anymore.

Pm me if you are interested.

sobe-it

sr. member

Activity: 453

Merit: 250

Quote from: helipotte on February 12, 2016, 01:44:21 PM

Quote from: wlefever on February 12, 2016, 01:16:21 PM

I have a few "SOMETIMES" working R-Box 32-37 Gh/s miners and a Antminer U3 just sitting around bc I couldnt get it connected if you're interested.

~~Holding on to a Avalon 4.1 that still runs at 950 Gh/s that I may part with if you wanted one.~~ Just re read the thread and don't think this fits your criteria!

I can't use the R-box stuff. I actually would be interested in the Avalon. PM of post here with what you are asking.

Pm me on the rbox pods since hes not interested.

helipotte

hero member

Activity: 650

Merit: 500

Pick and place? I need more coffee.

Quote from: wlefever on February 12, 2016, 01:16:21 PM

I have a few "SOMETIMES" working R-Box 32-37 Gh/s miners and a Antminer U3 just sitting around bc I couldnt get it connected if you're interested.

~~Holding on to a Avalon 4.1 that still runs at 950 Gh/s that I may part with if you wanted one.~~ Just re read the thread and don't think this fits your criteria!

I can't use the R-box stuff. I actually would be interested in the Avalon. PM of post here with what you are asking.

wlefever

legendary

Activity: 1174

Merit: 1001

I have a few "SOMETIMES" working R-Box 32-37 Gh/s miners and a Antminer U3 just sitting around bc I couldnt get it connected if you're interested.

~~Holding on to a Avalon 4.1 that still runs at 950 Gh/s that I may part with if you wanted one.~~ Just re read the thread and don't think this fits your criteria!

mindtrip

legendary

Activity: 1167

Merit: 1009

yeah sorry your best bet is to look for someone local to you selling old miners. I had someone come do local pick up for my last sale of old miners it saved him a lot on shipping

QuentinA

hero member

Activity: 628

Merit: 504

Quote from: mindtrip on February 12, 2016, 09:15:47 AM

Quote from: QuentinA on February 12, 2016, 08:10:03 AM

Sorry to intrude like this, but I'd gladly take a monarch from OregonMines.com and why not the bitcrane unit from mindtrip

That is of course if you're not taking them

Also I know shipping will be pretty expensive to EU but do you guys have any idea?

Or any people located in EU have disfunctionnal HW to sell/give away?

Once again, helipotte is first to choose as he initiated the subject

I would sell but you would need to look into some sort of low cost shipping arangment to your country I am located in NY near NY City

Well that's the problem, it's 100usd for shipping 15kg by boat... So as long as you're not on the same continent it's not worth it (or for huge orders but not useable for outdated HW)

mindtrip

legendary

Activity: 1167

Merit: 1009

Quote from: QuentinA on February 12, 2016, 08:10:03 AM

Sorry to intrude like this, but I'd gladly take a monarch from OregonMines.com and why not the bitcrane unit from mindtrip

That is of course if you're not taking them

Also I know shipping will be pretty expensive to EU but do you guys have any idea?

Or any people located in EU have disfunctionnal HW to sell/give away?

Once again, helipotte is first to choose as he initiated the subject

I would sell but you would need to look into some sort of low cost shipping arangment to your country I am located in NY near NY City

QuentinA

hero member

Activity: 628

Merit: 504

Sorry to intrude like this, but I'd gladly take a monarch from OregonMines.com and why not the bitcrane unit from mindtrip

That is of course if you're not taking them

Also I know shipping will be pretty expensive to EU but do you guys have any idea?

Or any people located in EU have disfunctionnal HW to sell/give away?

Once again, helipotte is first to choose as he initiated the subject

mindtrip

legendary

Activity: 1167

Merit: 1009

I still have some old / dead stuff if your still interested in any of it

4-5 Gridseed 5 Chip Globes
1 Antminer U3
1 Bitcrane T110S (1 Board is dead works at around 600GH)

Old Stuff that works
1 S2
1 S2 Missing a few boards
2 Rbox 110GH Units
1 Antminer U3 that works
10 Antminer U2 Sticks

helipotte

hero member

Activity: 650

Merit: 500

Pick and place? I need more coffee.

Still on the lookout for dead/broken miners. Cheesy

jstew

sr. member

Activity: 469

Merit: 500

Quote from: helipotte on January 24, 2016, 06:17:10 PM

Quote from: jstew on January 24, 2016, 05:55:33 PM

its a long shot but i have an s2 with 7 out of 10 boards that were damaged in shipping , none of the boards are cracked in half or have breakes etc in them , what happened is some of the capacitors and resitors on the board got knocked off , they could actually be fixed with the right tools.

also have the backplane/controller/case for it

Would not mind playing with an old S2. Really wanted to order one back in 2014. Shipping would most likely be too much.

if just shipped as boards/backplane i dont think it would be that much to ship , could mount the backplane to a table or shelf and just put a fan infront of it to cool the cards

lol i have 11 working s2's that i dont even dare to try selling whole cause of the shipping cost, not a big deal they still turn a profit and when they dont anymore i have a bunch of 1000 and 1300w psus i can sell or reuse

helipotte

hero member

Activity: 650

Merit: 500

Pick and place? I need more coffee.

Quote from: jstew on January 24, 2016, 05:55:33 PM

its a long shot but i have an s2 with 7 out of 10 boards that were damaged in shipping , none of the boards are cracked in half or have breakes etc in them , what happened is some of the capacitors and resitors on the board got knocked off , they could actually be fixed with the right tools.

also have the backplane/controller/case for it

Would not mind playing with an old S2. Really wanted to order one back in 2014. Shipping would most likely be too much.

helipotte

hero member

Activity: 650

Merit: 500

Pick and place? I need more coffee.

Quote from: generalt on January 24, 2016, 12:54:39 PM

I have a dead S5+ hash board if you're interested. Heat sinks fell off and overheated some of the chips.

Can't really use any Antminer "parts" might want to look here:

https://bitcointalksearch.org/topic/bm1384-pod-miner-plus-trade-inrecycling-an-interest-and-feasibility-poll-1203190

If it where a whole machine, different story. Wink

jstew

sr. member

Activity: 469

Merit: 500

jstew

sr. member

Activity: 469

Merit: 500

its a long shot but i have an s2 with 7 out of 10 boards that were damaged in shipping , none of the boards are cracked in half or have breakes etc in them , what happened is some of the capacitors and resitors on the board got knocked off , they could actually be fixed with the right tools.

also have the backplane/controller/case for it

generalt

legendary

Activity: 1096

Merit: 1021

I have a dead S5+ hash board if you're interested. Heat sinks fell off and overheated some of the chips.

helipotte

hero member

Activity: 650

Merit: 500

Pick and place? I need more coffee.

Got some interesting offers. Still looking!

Romanko

sr. member

Activity: 325

Merit: 250

Thanks for your interest, currently miners not near me, will update with info on selected gear with photos and additional info next week.

Quote from: helipotte on January 19, 2016, 07:51:34 PM

Quote from: Romanko on January 19, 2016, 07:06:05 PM

Hey have a lot of that stuff))
1. 3 pics Prismas of 1,4TH, some with burned chips, not many useful part there)) BE controller ok works with two blades at 0.7 TH
2. XBET 3.2 TH miner works at 1,6TH and I think can be repaired.
3. R3 - 450GH - 3 pieces - miners are ok, but the controller doesnt power on.
4. Rockminer T1 - have 3 cubes at 2 TH ( 2 cubes work ok, and the third one from time to time)
5. KNC cubes - they hash as they want some 1/2, 1/4, -/-))
6. and of course KNC controllers that dont see the cubes - 4 pics. BB's are ok.

P.S. By the way if somebody has KNC neptune controller I might be interested!

PM Sent.

helipotte

hero member

Activity: 650

Merit: 500

Pick and place? I need more coffee.

Quote from: Romanko on January 19, 2016, 07:06:05 PM

Hey have a lot of that stuff))
1. 3 pics Prismas of 1,4TH, some with burned chips, not many useful part there)) BE controller ok works with two blades at 0.7 TH
2. XBET 3.2 TH miner works at 1,6TH and I think can be repaired.
3. R3 - 450GH - 3 pieces - miners are ok, but the controller doesnt power on.
4. Rockminer T1 - have 3 cubes at 2 TH ( 2 cubes work ok, and the third one from time to time)
5. KNC cubes - they hash as they want some 1/2, 1/4, -/-))
6. and of course KNC controllers that dont see the cubes - 4 pics. BB's are ok.

P.S. By the way if somebody has KNC neptune controller I might be interested!

PM Sent.

Romanko

sr. member

Activity: 325

Merit: 250

Hey have a lot of that stuff))
1. 3 pics Prismas of 1,4TH, some with burned chips, not many useful part there)) BE controller ok works with two blades at 0.7 TH
2. XBET 3.2 TH miner works at 1,6TH and I think can be repaired.
3. R3 - 450GH - 3 pieces - miners are ok, but the controller doesnt power on.
4. Rockminer T1 - have 3 cubes at 2 TH ( 2 cubes work ok, and the third one from time to time)
5. KNC cubes - they hash as they want some 1/2, 1/4, -/-))
6. and of course KNC controllers that dont see the cubes - 4 pics. BB's are ok.

P.S. By the way if somebody has KNC neptune controller I might be interested!

quakefiend420

legendary

Activity: 784

Merit: 1000

I have a Neptune cube that is recognized but doesn't hash. PM me.

helipotte

hero member

Activity: 650

Merit: 500

Pick and place? I need more coffee.

Quote from: OregonMines.com on January 19, 2016, 03:44:50 PM

Any interest in more Monarchs?

Sent PM.

OregonMines.com

member

Activity: 110

Merit: 10

OregonMines Official Account

Any interest in more Monarchs?

helipotte

hero member

Activity: 650

Merit: 500

Pick and place? I need more coffee.

Quote from: mindtrip on January 18, 2016, 10:41:23 PM

I got some old grid seed 5 chip miners some dead, some work, some under perform

PM sent.

mindtrip

legendary

Activity: 1167

Merit: 1009

I got some old grid seed 5 chip miners some dead, some work, some under perform

helipotte

hero member

Activity: 650

Merit: 500

Pick and place? I need more coffee.

Prefer US sellers due to shipping costs. Can arrange pickup if you are close.

Types of things I am interested in:

Water-cooled miners with a non-functioning water cooling system.

Miners that don't power on / do nothing.

Miners that come on, but misbehave in some way(s).

Miners that have dead chips or hash at a lower than expected rate.

Scrypt or sha-256 are OK.

Prefer complete miners, but let me know what you have.

Would be willing to pay shipping, escrow, and small amount for trouble of packaging. Would pay more for miners that only have small problems.

Thanks!

Edit00: Have had some offer me gridseed pods. I have lots of those but would be intersted in a G-blade. Working or not. Wink

Edit01: Due to difficulty increases, only looking for broken newer stuff. Thanks to everyone for your offers!

Topic: [WTB] Looking for DEAD mining hardware! What have you got? post here or PM (Read 1177 times)