Topic: [WTB/WTS] ASIC parts Recycling Repair Reuse ♲♻⚒ (Read 566 times)
Mining farms, should e connected to solar panels I think because such panels produce green energy. But mining consumes a lot of electricity. It’s not ecological. People should care about the environment more. I personally do everything I can to save the earth. I even use services of rubbish clearance portsmouth, they recycle correctly every waste. They simply take it from my place once a week, so I even don't have to do any effort.
Oh, I know how hard it is to handle waste disposal. In the fall, I did a major renovation of the kitchen, and, as you already understood, a lot of garbage has accumulated. I installed new kitchen cabinets, so I had to throw out the old ones. You know, I was very perplexed where to throw all the garbage after the repair. Fortunately, bin rental turned out to be a very simple task. I made an order online, and a couple of hours later, a 14-yard dumpster was delivered to me. I easily put all the trash in a container, and the next day the same company took out the trash can with the trash. Renting a trash can is very convenient.
I red tagged it but hey pretty cool bot if I do say so my self
Any more quantitative e-scrap , over qualitative scrap in the south? I need to make some $
PM'd, have 4x s9 hashboards and some fans
*Update*
I've acquired 416 of these spondoolies SP30/31 Units from passthepopcorn (paid) -pending pickup-
If anyone with free electricity wants a cheap miner!
I will have these in hand ready to shipout the 19th or 22nd.
I'm looking for a S9 hashboard,case,18pin connectors (x3),2 fans for case.
I've acquired 416 of these spondoolies SP30/31 Units from passthepopcorn (paid) -pending pickup-
If anyone with free electricity wants a cheap miner!
I will have these in hand ready to shipout the 19th or 22nd.
I'm looking for a S9 hashboard,case,18pin connectors (x3),2 fans for case.
yea they would need free electricity - think the 31's pull around 3,000 watts but still 416 of them at around 4.5 th/s each is close to 1.9 ph/s
Im interested and PM'ed ya thanks for reaching out!
Quote
Hey just wanted to let you know I got my package yesterday. Great dealing with you and hope everything arrived on your end. See you around.
it all came in thanks! like a week or 2 ago . I sent that out on the 24th im surprised it took that long to get to you.
Im interested and PM'ed ya thanks for reaching out!
[/quote]
Hey just wanted to let you know I got my package yesterday. Great dealing with you and hope everything arrived on your end. See you around.
[/quote]
Hey just wanted to let you know I got my package yesterday. Great dealing with you and hope everything arrived on your end. See you around.
Bump some updates applied.
Id really like to find more 18 Wheeler's full of stuff or multiple pallets.
I'm interested if your in Texas or your state touches Texas on the bulk scrap.
I'm also interested in purchasing offlease equipment if anyone has leads get rewards.
Id really like to find more 18 Wheeler's full of stuff or multiple pallets.
I'm interested if your in Texas or your state touches Texas on the bulk scrap.
I'm also interested in purchasing offlease equipment if anyone has leads get rewards.
I have a bunch of S9 Housings and some broken fans and hashboards I could part with
pm me I'm interested ! 
I have a bunch of S9 Housings and some broken fans and hashboards I could part with
have a some random dr2, dr3, s7, a2 and silverfish stuff (can include progset)
yours for shipping cost if interested
yours for shipping cost if interested
Just trowing it out there i got a few satori id trade for some parts if anyone has some stuff?
sp10 sp20 sp30 sp31 Spondoolies units available.
over 800 powersupplies from these will sell bulk packages cheap(no breakouts or cords)
sp10 sp20 sp30 sp31 Spondoolies units available.
over 800 powersupplies from these will sell bulk packages cheap(no breakouts or cords)
The Have Nots
on that note,
Do you have any Antminer E3/T3+ control boards laying around.
Some issues with a miner i just picked up.
LMK
Thanks,
Do you have any Antminer E3/T3+ control boards laying around.
Some issues with a miner i just picked up.
LMK
Thanks,
I've posted some updates to the OP, I encourage anyone to post anything on here and I will try to keep it up to date like a micro classifieds.
Thanks for the support guys! This has been awesome!
have a some random dr2, dr3, s7, a2 and silverfish stuff (can include progset)
yours for shipping cost if interested
yours for shipping cost if interested
on that note,
Do you have any Antminer E3/T3+ control boards laying around.
Some issues with a miner i just picked up.
LMK
Thanks,
Im afraid not Do you have any Antminer E3/T3+ control boards laying around.
Some issues with a miner i just picked up.
LMK
Thanks,
on that note,
Do you have any Antminer E3/T3+ control boards laying around.
Some issues with a miner i just picked up.
LMK
Thanks,
Do you have any Antminer E3/T3+ control boards laying around.
Some issues with a miner i just picked up.
LMK
Thanks,
PassThePopcorn i got all the units in today.
+trust from me i bought 14500 lbs and you delivered over 17000 lbs
Call me from now on servers too.
Approximately 90% is being scrapped at r2
If anyone wants any sp10 sp20 sp30 sp31 units i got em.
I also have over 800 powersupplies from these will sell bulk packages cheap.
+trust from me i bought 14500 lbs and you delivered over 17000 lbs
Call me from now on servers too.
Approximately 90% is being scrapped at r2
If anyone wants any sp10 sp20 sp30 sp31 units i got em.
I also have over 800 powersupplies from these will sell bulk packages cheap.
Just trowing it out there i got a few satori id trade for some parts if anyone has some stuff?
Hey,
If your interested I have a T9+ minus the controller. 2 boards were perfectly fine one board had a lost chain, which looked like maybe a chip had burned out - showed up that way. LEt me know if you'd like those parts it would ship from Canada - you just have to cover shipping and you could toss in a little extra if you feel like it.
At a minimum I know you will recycle it properly if it isn't something you need, where as my towns wooden box, I'm not so sure the mice know where to deliver the recyclable components.
Im interested and PM'ed ya thanks for reaching out! If your interested I have a T9+ minus the controller. 2 boards were perfectly fine one board had a lost chain, which looked like maybe a chip had burned out - showed up that way. LEt me know if you'd like those parts it would ship from Canada - you just have to cover shipping and you could toss in a little extra if you feel like it.
At a minimum I know you will recycle it properly if it isn't something you need, where as my towns wooden box, I'm not so sure the mice know where to deliver the recyclable components.
Hey,
If your interested I have a T9+ minus the controller. 2 boards were perfectly fine one board had a lost chain, which looked like maybe a chip had burned out - showed up that way. LEt me know if you'd like those parts it would ship from Canada - you just have to cover shipping and you could toss in a little extra if you feel like it.
At a minimum I know you will recycle it properly if it isn't something you need, where as my towns wooden box, I'm not so sure the mice know where to deliver the recyclable components.
If your interested I have a T9+ minus the controller. 2 boards were perfectly fine one board had a lost chain, which looked like maybe a chip had burned out - showed up that way. LEt me know if you'd like those parts it would ship from Canada - you just have to cover shipping and you could toss in a little extra if you feel like it.
At a minimum I know you will recycle it properly if it isn't something you need, where as my towns wooden box, I'm not so sure the mice know where to deliver the recyclable components.
*Update*
I've acquired 416 of these spondoolies SP30/31 Units from passthepopcorn (paid) -pending pickup-
If anyone with free electricity wants a cheap miner!
I will have these in hand ready to shipout the 19th or 22nd.
I'm looking for a S9 hashboard,case,18pin connectors (x3),2 fans for case.
I've acquired 416 of these spondoolies SP30/31 Units from passthepopcorn (paid) -pending pickup-
If anyone with free electricity wants a cheap miner!
I will have these in hand ready to shipout the 19th or 22nd.
I'm looking for a S9 hashboard,case,18pin connectors (x3),2 fans for case.
-snip
Any interest in Spondoolies? SP3X'sThey're about a 3 hour drive from you and should all be in working order.
♲♻⚒♻♲⚒♲♻⚒♻♲⚒♲♻⚒♻♲⚒
Looking for your old, unused, broken or otherwise unwanted ASIC or crypto mining related parts.
This includes but not limited too:
I cant pay a whole lot basically shipping + a few extra dollars depending what you have up for grabs.
The idea is to simply recycle with me and make a few bucks.
But my idea is to eventually get enough parts to do some testing and building without the worry of burning up expensive working stuff.
Mix and match diodes,resistors connectors firmwares ect.
It would be nice to spreadsheet compatibility results.
And if something working or beneficial comes out of it Im happy.
I would like to stay domestic to USA to keep overall cost low. Parts ship to 76710 Texas
but I would entertain things internationally if they are current equipment at a nice discount to compensate shipping cost.
When I recycle unusable electronics stuff Its with a R2 certified entity.
Self-Moderated with occasional edits.
I will allow bartering between users within this topic as this project is hobbiest level for me,
Someone might really need a part you have more so then I would .
⚒♻♲⚒♲♻⚒♻♲⚒♲♻⚒♻♲⚒♲♻
Looking for your old, unused, broken or otherwise unwanted ASIC or crypto mining related parts.
This includes but not limited too:
- ASIC Housings (Cases)
- Hash boards
- Connectors
- Controllers
- Fans
- Power-supplies APW/APU Others
- GPU Mining parts
- Defunct Miners?
I cant pay a whole lot basically shipping + a few extra dollars depending what you have up for grabs.
The idea is to simply recycle with me and make a few bucks.
But my idea is to eventually get enough parts to do some testing and building without the worry of burning up expensive working stuff.
Mix and match diodes,resistors connectors firmwares ect.
It would be nice to spreadsheet compatibility results.
And if something working or beneficial comes out of it Im happy.
I would like to stay domestic to USA to keep overall cost low. Parts ship to 76710 Texas
but I would entertain things internationally if they are current equipment at a nice discount to compensate shipping cost.
When I recycle unusable electronics stuff Its with a R2 certified entity.
Self-Moderated with occasional edits.
I will allow bartering between users within this topic as this project is hobbiest level for me,
Someone might really need a part you have more so then I would .
⚒♻♲⚒♲♻⚒♻♲⚒♲♻⚒♻♲⚒♲♻
They're about a 3 hour drive from you and should all be in working order.
♲♻⚒♻♲⚒♲♻⚒♻♲⚒♲♻⚒♻♲⚒
Looking for your old, unused, broken or otherwise unwanted ASIC or crypto mining related parts.
This includes but not limited too:
I cant pay a whole lot basically shipping + a few extra dollars depending what you have up for grabs.
The idea is to simply recycle with me and make a few bucks.
But my idea is to eventually get enough parts to do some testing and building without the worry of burning up expensive working stuff.
Mix and match diodes,resistors connectors firmwares ect.
It would be nice to spreadsheet compatibility results.
And if something working or beneficial comes out of it Im happy.
I would like to stay domestic to USA to keep overall cost low. Parts ship to 76710 Texas
but I would entertain things internationally if they are current equipment at a nice discount to compensate shipping cost.
When I recycle unusable electronics stuff Its with a R2 certified entity.
Self-Moderated with occasional edits.
I will allow bartering between users within this topic as this project is hobbiest level for me,
Someone might really need a part you have more so then I would .
⚒♻♲⚒♲♻⚒♻♲⚒♲♻⚒♻♲⚒♲♻
Looking for your old, unused, broken or otherwise unwanted ASIC or crypto mining related parts.
This includes but not limited too:
- ASIC Housings (Cases)
- Hash boards
- Connectors
- Controllers
- Fans
- Power-supplies APW/APU Others
- GPU Mining parts
- Defunct Miners?
I cant pay a whole lot basically shipping + a few extra dollars depending what you have up for grabs.
The idea is to simply recycle with me and make a few bucks.
But my idea is to eventually get enough parts to do some testing and building without the worry of burning up expensive working stuff.
Mix and match diodes,resistors connectors firmwares ect.
It would be nice to spreadsheet compatibility results.
And if something working or beneficial comes out of it Im happy.
I would like to stay domestic to USA to keep overall cost low. Parts ship to 76710 Texas
but I would entertain things internationally if they are current equipment at a nice discount to compensate shipping cost.
When I recycle unusable electronics stuff Its with a R2 certified entity.
Self-Moderated with occasional edits.
I will allow bartering between users within this topic as this project is hobbiest level for me,
Someone might really need a part you have more so then I would .
⚒♻♲⚒♲♻⚒♻♲⚒♲♻⚒♻♲⚒♲♻
*EDITS BELOW*
These are quote's from users looking for parts or that have parts.
The Haves
have a some random dr2, dr3, s7, a2 and silverfish stuff (can include progset)
yours for shipping cost if interested
yours for shipping cost if interested
Just trowing it out there i got a few satori id trade for some parts if anyone has some stuff?
sp10 sp20 sp30 sp31 Spondoolies units available.
over 800 powersupplies from these will sell bulk packages cheap(no breakouts or cords)
sp10 sp20 sp30 sp31 Spondoolies units available.
over 800 powersupplies from these will sell bulk packages cheap(no breakouts or cords)
I have a bunch of S9 Housings and some broken fans and hashboards I could part with
The Have Nots
on that note,
Do you have any Antminer E3/T3+ control boards laying around.
Some issues with a miner i just picked up.
LMK
Thanks,
Do you have any Antminer E3/T3+ control boards laying around.
Some issues with a miner i just picked up.
LMK
Thanks,
Jump to: