These have all been sold,
Thread closed.
Thank you!
Topic: [WTS] 30+GH Chili Miners - $2.83/GH (Read 1085 times)
are these still for sale? any price changes for single units?
Lowering to $85/Chili but removing the package deal - You can purchase the PSUs and Hubs separately.
It's not the hashrate, it's that these things use a lot of power for the speed that they run at.
I understand, however there are people who get free electricity (built into their rent or however they do it) and they could easily run 1-6 of these and just earn coin.
How about 75 for a chili ?
I would do your "buy 6 offer" at that price.
I would do your "buy 6 offer" at that price.
Sorry
The Deal includes the PSUs and Hub. The PSUs are easily sold for $50/each and the Hub is maybe $15/20.$100/each including the above is Plug and Play and I believe is a pretty good price.
can you do cheap eu posatge? im after 4-5
I can sell to the EU but payment HAS to be in Bitcoins as even in the US PayPal/Credit Cards are risky. I won't know the price until I package them up but I don't expect it will be too much. Can you give me an Address via PM and I'll try to get you an estimate.
can you do cheap eu posatge? im after 4-5
How about 75 for a chili ?
I would do your "buy 6 offer" at that price.
I would do your "buy 6 offer" at that price.
What if I offered you $60 for a chili?
No thanks,
The price reflects shipping within 24 hours. Also most of the chilis I'm selling are 32-35GH but I don't want to falsely advertise so I put 30GH+
If you were to redo the heatsink with a better thermal solution you could probably almost get 40GH out of them.
It's not the hashrate, it's that these things use a lot of power for the speed that they run at.
What if I offered you $60 for a chili?
No thanks,
The price reflects shipping within 24 hours. Also most of the chilis I'm selling are 32-35GH but I don't want to falsely advertise so I put 30GH+
If you were to redo the heatsink with a better thermal solution you could probably almost get 40GH out of them.
What if I offered you $60 for a chili?
I do appreciate you looking out for me ... but I can't say salting the OPs game will make him very happy.
Lower hash higher price.
You don't get a 10 sack of weed for quarter pound price break downs.
Also ... the site you speak of is sold out.
Cheapest you can get them now is 499 USD that I have found.
You don't get a 10 sack of weed for quarter pound price break downs.
Also ... the site you speak of is sold out.
Cheapest you can get them now is 499 USD that I have found.
Do consider a 180GH bitmaintech miner sells for 0.893 BTC each.
And you sell 30 GH for $100 each.
At current prices of $455/Bitcoin.
455/100=4.55*30= 136 GH/Bitcoin.
If I place an order with Antminer its 180 GH/0.893 BTC.
180/0.893=0.00496, 1/0.004961=201.5677 GH Per bitcoin.
Also do consider an antminer uses about 360 Watts each, about 3 Times lower power consumption then getting 6X30GH Chillies.
If i am not mistaken, and they overclock to 200 GH per antminer too.
Taking 201.57/136=1.482X.
So I get 1.482X more hashrate with Bitmain, or different venders at much lower power consumption.
Just pointing it out.
And you sell 30 GH for $100 each.
At current prices of $455/Bitcoin.
455/100=4.55*30= 136 GH/Bitcoin.
If I place an order with Antminer its 180 GH/0.893 BTC.
180/0.893=0.00496, 1/0.004961=201.5677 GH Per bitcoin.
Also do consider an antminer uses about 360 Watts each, about 3 Times lower power consumption then getting 6X30GH Chillies.
If i am not mistaken, and they overclock to 200 GH per antminer too.
Taking 201.57/136=1.482X.
So I get 1.482X more hashrate with Bitmain, or different venders at much lower power consumption.
Just pointing it out.
Ooooooh nice!!!
I am def watching this thread.
I love all this asic stuff now lol so much more fun than GPU.
I am def watching this thread.
I love all this asic stuff now lol so much more fun than GPU.
That terminal looks cool man.
Thanks!
Still have these Chilis in stock ready to ship out.
I'll also consider offers.
That terminal looks cool man.
Bump
+30 GH/S "Chili" - BFL Chip based ASIC Bitcoin Miner
$85/each - BTC Only - Shipped within 24 hours M-F
*Discontinued* *Deals* - Buy 6 and receive 2 750W PSUs + 7 Port Hub - Selling these items Separately
Plug and Play - Use Latest BFGMiner - Will recognize and hash right away!
Limited Amount Manufactured - Own a piece of Bitcoin History!
Available - 33 Units
Package Contents
(1) 30GH+ Bitcoin miner
(1) Coolermaster Hyper212 Evo CPU Cooler - Already Installed
(1) Standard USB mini-B
Product Features
Hardware
4-phase Digital Voltage Regulator
Designed using state-of-the-art Texas Instruments integrated driver MOSFETs (DrMOS), it provides ample power to the BFL chips. Designed for high efficiency at 100A, it can provide 160A continuous with adequate extra cooling. Voltage levels are software programmable, and it supports reading a whole range of data, including input and output voltage, per phase and total current, duty cycles and temperatures
11 Temperature Sensors
One at the MOSFETs, onboard the voltage regulator, a general board temp, and the on-die temperatures of each ASIC
Per-Chip Frequency Measurements
The hashing frequency of the BFL chips is very voltage sensitive, but even at the same voltage there is a wide variation in frequency at the same setpoint between different chips. The Chili is the only board that measures the actual frequency of each chip using the on-chip clock output.
High Performance ARM microcontroller
A high performance Cortex M3 microcontroller was chosen, and direct DMA access allows it to simultaneously communicate with ASICs on two SPI busses while also performing other job queuing and monitoring applications.
Versatile Form Factor
Designed to be compatible with a common PCI expansion chassis, mounting large numbers of the Chili is as simple as mounting a GPU. Alternate configurations are also available; holes with the same spacing as those on the bottom of common 3.5" HDDs allow the Chili to be screwed on a HDD caddy and mounted in a hard drive bay.
Software
Entirely Custom Code
Starting from a blank slate and using the BFL code only as a reference, we worked from the ground up to make the Chili as efficient as possible.
USB Firmware Updates
As new features are added, the software can be field updated over USB without the need to buy a JTAG programmer.
P2Pool Efficient
Because we are able to accurately measure frequency and the real hashing power of each chip, we can efficiently divide work between chips without gaps. This allows support for one job per board vs one job per chip. In addition, when a new block is detected the old work is aborted and the new work is immediately loaded.
Fully Dynamic and Automatic Frequency, Voltage and Fan Speed Control
Fully dynamic and automatic voltage (V), frequency (F) and fan speed (S) control to maximize hashing performance while staying within safe operating parameters of temperature and voltage. As the environment (room temperature) changes, V, F, and S will be adjust appropriately to maintain the highest hashing power based on the specified limits. This allows each individual chip to be pushed to it's safe limit without one slow chip throttling the entire assembly or a single hot chip destroying itself due to localized overheating. The user will be able to select slower fan speeds for noise sensitive environments such as bedrooms at the cost of some hashing power performance loss.
Software work is still continuing at breakneck pace to make sure that every feature is ready to by the time production is done, including some exciting as of yet unannounced features that will really allow us to push the chips to their maximum.
Product Info
Hashrate +30GH/s
Chip Type Global Foundries advanced 65nm technology (IBM core)
Power Consumption 5.5 Watts per GH/s at the wall
Chips per Board 8
We will not provide cancellations on transactions for any reason. Please be sure to read the entire description and understand what you are purchasing prior to ordering.
Shipping
If Payment is received by 12 pm PST on weekdays the miner will be shipped within 24 hours.
Any purchases with payments received on weekends, holidays will ship the following business day.
I can do local pick-up if requested.
Return Policy
There are no returns. All sale are Final. Product is Guaranteed to function as described.
Warranty
All sales are final.
There is no warranty on these items. Each units will be tested prior to shipment and will not ship unless it is working. Should an issue arise due to a non-ASIC problem we can work with you to get it repaired. BFL's ASICs are a bit of an unknown however, and we can not guarantee their longevity or reliability.
Pictures
Current BFGMiner Screenshot
If Interested please PM me
$85/each - BTC Only - Shipped within 24 hours M-F
*Discontinued* *Deals* - Buy 6 and receive 2 750W PSUs + 7 Port Hub - Selling these items Separately
Plug and Play - Use Latest BFGMiner - Will recognize and hash right away!
Limited Amount Manufactured - Own a piece of Bitcoin History!
Available - 33 Units
Package Contents
(1) 30GH+ Bitcoin miner
(1) Coolermaster Hyper212 Evo CPU Cooler - Already Installed
(1) Standard USB mini-B
Product Features
Hardware
4-phase Digital Voltage Regulator
Designed using state-of-the-art Texas Instruments integrated driver MOSFETs (DrMOS), it provides ample power to the BFL chips. Designed for high efficiency at 100A, it can provide 160A continuous with adequate extra cooling. Voltage levels are software programmable, and it supports reading a whole range of data, including input and output voltage, per phase and total current, duty cycles and temperatures
11 Temperature Sensors
One at the MOSFETs, onboard the voltage regulator, a general board temp, and the on-die temperatures of each ASIC
Per-Chip Frequency Measurements
The hashing frequency of the BFL chips is very voltage sensitive, but even at the same voltage there is a wide variation in frequency at the same setpoint between different chips. The Chili is the only board that measures the actual frequency of each chip using the on-chip clock output.
High Performance ARM microcontroller
A high performance Cortex M3 microcontroller was chosen, and direct DMA access allows it to simultaneously communicate with ASICs on two SPI busses while also performing other job queuing and monitoring applications.
Versatile Form Factor
Designed to be compatible with a common PCI expansion chassis, mounting large numbers of the Chili is as simple as mounting a GPU. Alternate configurations are also available; holes with the same spacing as those on the bottom of common 3.5" HDDs allow the Chili to be screwed on a HDD caddy and mounted in a hard drive bay.
Software
Entirely Custom Code
Starting from a blank slate and using the BFL code only as a reference, we worked from the ground up to make the Chili as efficient as possible.
USB Firmware Updates
As new features are added, the software can be field updated over USB without the need to buy a JTAG programmer.
P2Pool Efficient
Because we are able to accurately measure frequency and the real hashing power of each chip, we can efficiently divide work between chips without gaps. This allows support for one job per board vs one job per chip. In addition, when a new block is detected the old work is aborted and the new work is immediately loaded.
Fully Dynamic and Automatic Frequency, Voltage and Fan Speed Control
Fully dynamic and automatic voltage (V), frequency (F) and fan speed (S) control to maximize hashing performance while staying within safe operating parameters of temperature and voltage. As the environment (room temperature) changes, V, F, and S will be adjust appropriately to maintain the highest hashing power based on the specified limits. This allows each individual chip to be pushed to it's safe limit without one slow chip throttling the entire assembly or a single hot chip destroying itself due to localized overheating. The user will be able to select slower fan speeds for noise sensitive environments such as bedrooms at the cost of some hashing power performance loss.
Software work is still continuing at breakneck pace to make sure that every feature is ready to by the time production is done, including some exciting as of yet unannounced features that will really allow us to push the chips to their maximum.
Product Info
Hashrate +30GH/s
Chip Type Global Foundries advanced 65nm technology (IBM core)
Power Consumption 5.5 Watts per GH/s at the wall
Chips per Board 8
We will not provide cancellations on transactions for any reason. Please be sure to read the entire description and understand what you are purchasing prior to ordering.
Shipping
If Payment is received by 12 pm PST on weekdays the miner will be shipped within 24 hours.
Any purchases with payments received on weekends, holidays will ship the following business day.
I can do local pick-up if requested.
Return Policy
There are no returns. All sale are Final. Product is Guaranteed to function as described.
Warranty
All sales are final.
There is no warranty on these items. Each units will be tested prior to shipment and will not ship unless it is working. Should an issue arise due to a non-ASIC problem we can work with you to get it repaired. BFL's ASICs are a bit of an unknown however, and we can not guarantee their longevity or reliability.
Pictures
Current BFGMiner Screenshot
If Interested please PM me
Jump to: