Topic: WTS- 4 Prismas Best Price Takes It.. (Read 838 times)
Also willing to sell a pi with it with the updated minera on it.
Bump you pay shipping and a couple bucks for my time. The best offer takes it.
I'll let these goes for 2 BTC + shipping all 4 that's 8 ths if you over click it.. Just want to let these go..
Try starting cgminer then plugging in the USB cable...sometimes the hot plugging works for those miners. AM never did make high-quality interfaces for their gear unfortunately.
A bit steering away from the topic for your intent to selling these miners. But i have some AM Tubes that i have quite a bit of problems running off the crap BE controller. I got a UART USB converter but i can't find a version of already compiled windows cgminer/bfgminer that works.
Might i bother you as to where you got your RasPi image to run these?
Might i bother you as to where you got your RasPi image to run these?
Best option is Minera on a Rasp Pi. CrazyGuy created a custom image and also probably has the patched Cgminer.
Thanks Blazed.
Yeah, can't figure it out. Got the image from his git, the cgminer does not support bet-clk, recompiling with config --enable-blockerupter solve that but still no device detected. I give up on these.
Ahh, thats nice of you. I recompiled the miner with --enable-blockerupter but its still not detected, so i'm not sure if there's some command line you need to put at runtime or if my USB-UART thing is just defective. =/
A bit steering away from the topic for your intent to selling these miners. But i have some AM Tubes that i have quite a bit of problems running off the crap BE controller. I got a UART USB converter but i can't find a version of already compiled windows cgminer/bfgminer that works.
Might i bother you as to where you got your RasPi image to run these?
Might i bother you as to where you got your RasPi image to run these?
Best option is Minera on a Rasp Pi. CrazyGuy created a custom image and also probably has the patched Cgminer.
Thanks Blazed.
Yeah, can't figure it out. Got the image from his git, the cgminer does not support bet-clk, recompiling with config --enable-blockerupter solve that but still no device detected. I give up on these.
A bit steering away from the topic for your intent to selling these miners. But i have some AM Tubes that i have quite a bit of problems running off the crap BE controller. I got a UART USB converter but i can't find a version of already compiled windows cgminer/bfgminer that works.
Might i bother you as to where you got your RasPi image to run these?
Might i bother you as to where you got your RasPi image to run these?
Best option is Minera on a Rasp Pi. CrazyGuy created a custom image and also probably has the patched Cgminer.
Thanks Blazed.
Yeah, can't figure it out. Got the image from his git, the cgminer does not support bet-clk, recompiling with config --enable-blockerupter solve that but still no device detected. I give up on these.
Sorry for the delay, let me know if you want me to write on a piece of paper with my user just snapped the pics the other 2 are packed away..
A bit steering away from the topic for your intent to selling these miners. But i have some AM Tubes that i have quite a bit of problems running off the crap BE controller. I got a UART USB converter but i can't find a version of already compiled windows cgminer/bfgminer that works.
Might i bother you as to where you got your RasPi image to run these?
Might i bother you as to where you got your RasPi image to run these?
Best option is Minera on a Rasp Pi. CrazyGuy created a custom image and also probably has the patched Cgminer.
Thanks Blazed.
Also someone PMed me and asked if they where v1 or v2 please not he asked if they where the 800 or 1400. I have the 1,400 ghs v1 the v2 has the cover and I believe it runs at a lower frequency but not sure on that all 4 of mine run at a steady 1500ghs +-5% at stock I also did try them all with my own little design push pull added a fan to the front and added my own make shift case with it being aircooled but this was only a test because each one needed a 1600 watt and I had them at a 325 frequency pushing 2250ghs +- 10% with very low errors but as stated only a test and only for a few hours on each one.
This would only benefit people who have free or like 1-2¢ a KWH as stated before.
Will add pictures tomorrow..
This would only benefit people who have free or like 1-2¢ a KWH as stated before.
Will add pictures tomorrow..
A bit steering away from the topic for your intent to selling these miners. But i have some AM Tubes that i have quite a bit of problems running off the crap BE controller. I got a UART USB converter but i can't find a version of already compiled windows cgminer/bfgminer that works.
Might i bother you as to where you got your RasPi image to run these?
Might i bother you as to where you got your RasPi image to run these?
Best option is Minera on a Rasp Pi. CrazyGuy created a custom image and also probably has the patched Cgminer.
A bit steering away from the topic for your intent to selling these miners. But i have some AM Tubes that i have quite a bit of problems running off the crap BE controller. I got a UART USB converter but i can't find a version of already compiled windows cgminer/bfgminer that works.
Might i bother you as to where you got your RasPi image to run these?
I'm not positive I save everything on a computer of things that work the do's and the don'ts so I don't keep making the same mistakes lol. But I am at work right now so I am not positive I believe I got mine off of dogies prisma guide on here. But like I said not positive on that. Might i bother you as to where you got your RasPi image to run these?
A bit steering away from the topic for your intent to selling these miners. But i have some AM Tubes that i have quite a bit of problems running off the crap BE controller. I got a UART USB converter but i can't find a version of already compiled windows cgminer/bfgminer that works.
Might i bother you as to where you got your RasPi image to run these?
Might i bother you as to where you got your RasPi image to run these?
As title states, selling 4 all working BE controller took a shit they all run full spec on my Rasp Pi. But I use my Pi for my kids tv as my Plex server, and looking for some additional holiday money.
Please note they need a 1300 watt power supply unless you under volt and use a 1200 watt. These eat up electricity so unless you have free or super cheap electricity there very expensive to run.
Looking to get rid of all 4 at once but willing to split them up but will expect more then. Shipping from USA, Pa most likely with the UPS and standard shipping to most places looking at 34-36$ (estimate)!
Escrow excepted unless out of state if your in a different country I can not except lost damage or you just saying it didn't make it, but I am willing to ship anywhere.
Remember buyer pays everything remember to keep that in mind you cover the shipping fee's and escrow.
Please Note: the shipping fee must be released before shipment as I am going to actually use it for shipping. As everyone knows tiss the season and all my money the wife already spent and is still spending on gift.. (Nothing 4 Me Though) 🎅
Please note they need a 1300 watt power supply unless you under volt and use a 1200 watt. These eat up electricity so unless you have free or super cheap electricity there very expensive to run.
Looking to get rid of all 4 at once but willing to split them up but will expect more then. Shipping from USA, Pa most likely with the UPS and standard shipping to most places looking at 34-36$ (estimate)!
Escrow excepted unless out of state if your in a different country I can not except lost damage or you just saying it didn't make it, but I am willing to ship anywhere.
Remember buyer pays everything remember to keep that in mind you cover the shipping fee's and escrow.
Please Note: the shipping fee must be released before shipment as I am going to actually use it for shipping. As everyone knows tiss the season and all my money the wife already spent and is still spending on gift.. (Nothing 4 Me Though) 🎅
Jump to: