Topic: [WTS] 4x PandaMiner B3 Plus with 8x RX470 (4GB). Hash rate on ETH ~230 MH/s ea. (Read 158 times)
July 25, 2018, 06:50:53 AM
How much for one with no GPU?
July 16, 2018, 01:34:45 PM
PMed my offer.
July 16, 2018, 11:20:58 AM
video proof: https://streamable.com/rj9fm
Asking for $2100 each (shipping is included to USA addresses).
Asking for $2100 each (shipping is included to USA addresses).
July 15, 2018, 10:08:34 PM
I have four PandaMiner B3 Plus's that I would like to sell. They mine ETH perfectly at 225-228 MH/sec. Each of them come with eight RX470 GPU's with 4GB of vRAM each. They come with a Intel 3855U @ 1.60GHz and 4GB of DRAM.
They work fine but profitability isn't great so I would like to cash out. Will accept any cryptocurrency listed at Kraken so I can sell for fiat. Escrow accepted. Local Pickup possible in Houston, TX.
There are almost no moving parts because the GPU's have large heatsinks without individual fans. The miner case comes with six server-type (very loud and powerful) fans, three intake, and three exhaust. which are the only moving parts in the entire miner.
4x miners = 32x GPU's. 907.63 MH/sec TOTAL (actual number taken from Claymore logs).
Two of them use DDR3 memory and the other two have a newer-revision motherboard that uses DDR4 memory.
Unit #1 with MAC address 7c:2b:e1:0f:c2:d3 = 227.96 MH/sec (DDR4 model)
Unit #2 with MAC address 00:30:18:00:03:2f = 227.40 MH/sec (DDR3 model)
Unit #3 with MAC address 00:30:18:00:03:3c = 227.75 MH/sec (DDR3 model)
Unit #4 with MAC address 22:30:18:00:02:e5 = 224.52 MH/sec (DDR4 model)
Above numbers are actual performance figures with Claymore version 11.6.
These can also mine Zcash and Monero, but I do not have any experience with that. They are AMD RX470 GPU's so you can mine pretty much anything a GPU can mine.
Selling without power supply. They pull about 1,370 watts. You will need a power supply with seven PCIE connectors for each miner.
I saved all the packaging from when I bought these brand new, so the buyer will receive it in the original shipping box with the foam inserts that protects the miner during shipping.
Please make me an offer.
NOTE: I will upload video proof tomorrow.
Setup is simple, it is pretty much plug and play. Plug in network cable, power, and boot with the USB stick I will include. Then SSH into it using the username and password I will provide. Change the password if you want. Then edit the Claymore shell script to put in your own wallet address and then run Claymore. If you are handy with Linux (the stick runs Ubuntu 16.04.3 LTS), you can even set it up to start mining automatically by creating a crontab entry.
My last for-sale thread which went without an issue: https://bitcointalksearch.org/topic/m.28484029
They work fine but profitability isn't great so I would like to cash out. Will accept any cryptocurrency listed at Kraken so I can sell for fiat. Escrow accepted. Local Pickup possible in Houston, TX.
There are almost no moving parts because the GPU's have large heatsinks without individual fans. The miner case comes with six server-type (very loud and powerful) fans, three intake, and three exhaust. which are the only moving parts in the entire miner.
4x miners = 32x GPU's. 907.63 MH/sec TOTAL (actual number taken from Claymore logs).
Two of them use DDR3 memory and the other two have a newer-revision motherboard that uses DDR4 memory.
Unit #1 with MAC address 7c:2b:e1:0f:c2:d3 = 227.96 MH/sec (DDR4 model)
Unit #2 with MAC address 00:30:18:00:03:2f = 227.40 MH/sec (DDR3 model)
Unit #3 with MAC address 00:30:18:00:03:3c = 227.75 MH/sec (DDR3 model)
Unit #4 with MAC address 22:30:18:00:02:e5 = 224.52 MH/sec (DDR4 model)
Above numbers are actual performance figures with Claymore version 11.6.
These can also mine Zcash and Monero, but I do not have any experience with that. They are AMD RX470 GPU's so you can mine pretty much anything a GPU can mine.
Selling without power supply. They pull about 1,370 watts. You will need a power supply with seven PCIE connectors for each miner.
I saved all the packaging from when I bought these brand new, so the buyer will receive it in the original shipping box with the foam inserts that protects the miner during shipping.
Please make me an offer.
NOTE: I will upload video proof tomorrow.
Setup is simple, it is pretty much plug and play. Plug in network cable, power, and boot with the USB stick I will include. Then SSH into it using the username and password I will provide. Change the password if you want. Then edit the Claymore shell script to put in your own wallet address and then run Claymore. If you are handy with Linux (the stick runs Ubuntu 16.04.3 LTS), you can even set it up to start mining automatically by creating a crontab entry.
My last for-sale thread which went without an issue: https://bitcointalksearch.org/topic/m.28484029
Jump to: