Picked up a clear silver case from suprabitz today via PP
Thanks!
Topic: [WTS] Anodized Aluminum Open Air Mining Rig Cases Detritus Style $65 (Read 1544 times)
August 16, 2013, 07:31:41 PM
July 08, 2013, 04:02:29 PM
I'm selling Detrius style open air mining rigs.
I sincerely apologize for the Nvidia used in the photo - but all my Radeons are hard at work!
Color of the clear aluminum
In the picture of the prototype I was short some 3 way corner connectors so I didn't take the back end up and connect with the front, but those are included.
Specs:
Anodized 3/4" square aluminum tubing
Factory cut to Detrius's guide's lengths (18" wide x 9" deep by 8" tall).
Choose from Clear silver or Black
60 second assembly
Clear silver $65
Black $80 (this is a satin black similar to what you'd find for home theater equipment or server equipment)
This is just the frame. I may build full rigs with the motherboard mounting plate and PSU mount if demand is high enough. But price will be higher. For now you can pick up a sheet of luan plywood or plexiglass from the hardware store and use some rubber grommets or plastic spacers to mount your motherboard. The GPU holes are not pre-drilled so you can drill them where you want, or pick up a 3/4" x 18" piece of flat aluminum and you can drill 2 holes on the end for screws and have a quick release for the GPUs.
If you order 10+ I can have them cut larger or smaller. If I have enough demand I may even cut some double rig cases so you can stack 2 mobos. If you have Asicminer Blades or other Asic hardware, send me the specs and I will send you a quote. For custom orders I require at least 10 cases.
Shipping: Should be under $10 USD. Only US shipping for now.
Payment: BTC, LTC, Paypal, checks/money orders.
Reputation: I'm very active on Bitcointalk and have participated in several Asicminer group buys. My ebay userid is laptop_monster with over 2000 positive feedback and actively selling since 2009.
I sincerely apologize for the Nvidia used in the photo - but all my Radeons are hard at work!
Color of the clear aluminum
In the picture of the prototype I was short some 3 way corner connectors so I didn't take the back end up and connect with the front, but those are included.
Specs:
Anodized 3/4" square aluminum tubing
Factory cut to Detrius's guide's lengths (18" wide x 9" deep by 8" tall).
Choose from Clear silver or Black
60 second assembly
Clear silver $65
Black $80 (this is a satin black similar to what you'd find for home theater equipment or server equipment)
This is just the frame. I may build full rigs with the motherboard mounting plate and PSU mount if demand is high enough. But price will be higher. For now you can pick up a sheet of luan plywood or plexiglass from the hardware store and use some rubber grommets or plastic spacers to mount your motherboard. The GPU holes are not pre-drilled so you can drill them where you want, or pick up a 3/4" x 18" piece of flat aluminum and you can drill 2 holes on the end for screws and have a quick release for the GPUs.
If you order 10+ I can have them cut larger or smaller. If I have enough demand I may even cut some double rig cases so you can stack 2 mobos. If you have Asicminer Blades or other Asic hardware, send me the specs and I will send you a quote. For custom orders I require at least 10 cases.
Shipping: Should be under $10 USD. Only US shipping for now.
Payment: BTC, LTC, Paypal, checks/money orders.
Reputation: I'm very active on Bitcointalk and have participated in several Asicminer group buys. My ebay userid is laptop_monster with over 2000 positive feedback and actively selling since 2009.
Jump to: