Author

Topic: [WTS] Custom Acrylic Bill/Note Slabs - 2 sizes (Polymerbit, USD, etc)!! (Read 606 times)

legendary
Activity: 3570
Merit: 1959
Bump, last sale did not happen, so quite a few still available... Smiley
copper member
Activity: 674
Merit: 100
4 slab 1’s for me please
4 slab 2’s please
legendary
Activity: 3570
Merit: 1959
Batch 2 still available?

Yes sir!

I'd like 2 slabs from Batch 2 (sent to Minerjones), if you still have those available. I'll send the payment once you confirm.

No problem! PM me your txid and I will get them out! Wink

As always, great job!

I really love the look of those slabs. They are always high quality  Cheesy

I wonder if there's a way to seal these in for additional security. Maybe we could provide an official COA/hologram for you to use there?

-Daniele

Thanks! I have thought of that too, it would be pretty cool!... But... Each slab would theoretically need 2, one on each side to do it securely I think... Tongue

hero member
Activity: 705
Merit: 1016
As always, great job!

I really love the look of those slabs. They are always high quality  Cheesy

I wonder if there's a way to seal these in for additional security. Maybe we could provide an official COA/hologram for you to use there?

-Daniele
full member
Activity: 243
Merit: 232
Digital scarcity is a one-time discovery.
I'd like 2 slabs from Batch 2 (sent to Minerjones), if you still have those available. I'll send the payment once you confirm.
legendary
Activity: 2982
Merit: 1102
Batch 2 still available?
legendary
Activity: 3570
Merit: 1959
legendary
Activity: 3570
Merit: 1959
Hi fellow collectors!

I have the following acrylic bill/note holders for sale:

(Sorry, but ALL actual notes displayed are NOT for sale, JUST the holders)!

Please read the following carefully before posting messages and/or questions, as I have two slightly different sizes for sale:

Things to know:


(Disclaimer: Companies made both batches of these for me, I did not make them).

Batch 1: The quality is not quite as high as batch 2, but still very very nice/acceptable for the smaller sized notes, and cheaper. It's a pity they don't fit a standard Poly note, just the smaller/later ones like mystery notes (excluding Triangle), the penguin/cardinals, latest mystery notes, and the latest Spesmonerujo (v2) notes.  

Batch 2: The second batch is a bit more high-quality and slightly bigger - To make it much simpler for people, Batch 2 slabs are EXACTLY like these on Amazon, but with no cut-out insert, just the clear full insert, as they were a custom order. These are high quality slabs, still pre-polished, sealed and packed for about 2 years now. Tongue



Slabs - Batch 1: (Smaller) - 16 x Acrylic holders available, all untouched in plastic bags.


Sizing:
18cm wide X 9cm high x 13mm thick.
11oz apiece. (10.6oz Actual)
Included: 1 x USA/Imperial 9/64" hex wrench.

Notes: These slabs will NOT fit the normal size Polymerbit notes, however they will just barely fit a 1 USD bill, as shown below, and many other notes like the latest mystery series, cardinal/penguin, and the Spemonerujo v2 notes. Smiley

Front & back - click for fullsize-ness:



1 USD On top of the slab/note:




Slabs - Batch 2: (Bigger) - 15 13 x Acrylic holders, made by PlastixRevolution, still in sealed bags.

Sizing:
18.3cm wide x 9.25cm high x 13.9mm thick.
11oz apiece (10.8oz Actual)
Included: 1 x USA/Imperial 9/64" hex wrench.

Sizing for Batch 2: These slabs WILL fit a normal sized Polymerbit, as well as USD as show below, but these are generally higher quality than Batch 1 slabs.

Specifics: Fits notes sized 16.5cm wide x 7.1cm high and smaller.

Front and backs - click for fullsizeness:



1 USD placed on top of the slab/note:





Final note: As you may see above, or know from buying other items, I sometimes use shrink wrap to seal my slabs or sometimes graded coins using an impulse sealer with some shrink-wrap to avoid scratches. If you want or are willing to send me your notes, I can place them properly, and then give you an airtight shrink wrap for an additional 40 USD for my time per slab. Otherwise, learn it yourself, as it's not as easy as it seems, but then again, it's not super-difficult either after some practice.  Cheesy

Pricing/Payment/Shipping:

Slab Prices:

Batch 1: $23 USD per slab preev.com rate @ time of payment.
Batch 2: $29 USD per slab preev.com rate @ time of payment.


Payment:

Pretty much anything on most chains, just LMK! Smiley

Shipping:

Batch 1 - 3 x slabs per USPS SFRB (Small Flate Rate Box) (Add 8.50 USD)
Batch 2 - 2 x slabs per USPS SFRB (Small Flate Rate Box) (Add 8.50 USD)


Larger orders, contact me for more info.

Escrow or reship possible/encouraged for overseas members with MoparMiningLLC.

Thanks! Smiley

Edit First come first served. I may not be able to update this as often as I like, but will try! Tongue

Jump to: