Author

Topic: [WTS] Customs Cables PCI-E,Molex,Dupont,Ethernet (Read 699 times)

newbie
Activity: 42
Merit: 0
Hi,
 If anyone is interested in customs cables for their rigs, I would be more than glad to make it. Details Below.

Details

Type              : PCIE
Connections : 6Pin to 6Pin, 8Pin to 8Pin
Cable Used   : 1.5 Sq mm Havells Wire

Type              : Molex
Connections : 4 Pin (You need to tell me your PSU Make and Model as each has a different Pinout)
Cable Used   : 1.5 Sq mm Havells Wire

Type              : Dupont
Connections : 2 Pin with On/Off Switch and Red or Green or White or Blue LED
Cable Used   : Rainbow Cables

Type              : Ethernet
Connection   : Cat 5, Cat 5E, Cat 6
Note             : If you are planning on Power over Ethernet please let me know in advance.

Cost Calculation : Total Cost = Pin Cost + Connector Cost + Wire Length + Shipping

Rough Estimation for 80Cm 6 PIn to 6 Pin PCIE Cable : 20 Rs + Shipping

So if you need any cables please let me know of the length of the wire, I will give you the final price.

Some Photos for Details

Engineers PAD-01 Crimper Used for Molex, PCIE, Dupont, etc

Sample PCIE Crimp

Another Sample PCIE Crimp

Sample 6Pin to 6Pin PCIE Cable

6 Pin PCIE Connector

4 Pin Molex Sample

Please Note As I use 1.5 Sq MM wire the maximum power that can be handled is around 250W but I strongly urge you to limit it to <225W for fire safety reasons. I can use 2.5 Sq mm wire but the PCIE connector wont be able to handle that many Amps.

Also Note I will never do double crimping, I will always split them using a Y joint with solder and wrapped it with heat shrink. Like This

Please post or PM if you need any cables.

Kind Regards,
BLife
Jump to: