Author

Topic: WTS: Datacenter in Central WA (Read 2929 times)

hero member
Activity: 518
Merit: 501
January 05, 2017, 08:03:34 AM
#56
where in central washington?

I'm in chelan county if anyone needs someone on the ground here.

To re-iterate on the power costs here, they just bump your delivery fee up a little if you pass the 250w/sq foot limit. It's still cheaper than anywhere else.

Ideally you obtain a very large building for cheap which allows for large power usage.

This is the PUD website here: https://www.chelanpud.org/

It's currently 5am, give them a call in a couple hours if you have specific questions regarding their power costs.
sr. member
Activity: 490
Merit: 251
January 05, 2017, 12:46:58 AM
#55
Bump, got a different data center for sale. Updated info in OP
sr. member
Activity: 490
Merit: 251
March 14, 2016, 08:48:55 PM
#54
Bump
hero member
Activity: 924
Merit: 1000
January 27, 2016, 10:12:59 PM
#53
None of what we are talking about is even approved by the board yet. So there isn't anything to look up. It is nothing more than a proposal, but I told you all of what I know and got from the PUDs.

It is a proposal to be voted on in March.  The place will be available in March.

EDIT:  Would you hate to sign your name on something, only to find out a few weeks later you will not get 3 cents per kWh?

Again, I'm NOT trying to be difficult.  I only want to KNOW what I'm getting into without something hanging over my head.


Told you this guy was a Blow hard! He just lost most of his Bitcoins playing poker. He is one of the WORST poker players I have seen. Plus he left his wife and young son home as he gambles away his wife 401k.
We don't care about someone's personal life since it has no importance to the post. 
I do applaud people who ask the difficult and relevant questions.
full member
Activity: 157
Merit: 100
January 27, 2016, 09:37:20 PM
#52
None of what we are talking about is even approved by the board yet. So there isn't anything to look up. It is nothing more than a proposal, but I told you all of what I know and got from the PUDs.

It is a proposal to be voted on in March.  The place will be available in March.

EDIT:  Would you hate to sign your name on something, only to find out a few weeks later you will not get 3 cents per kWh?

Again, I'm NOT trying to be difficult.  I only want to KNOW what I'm getting into without something hanging over my head.


Told you this guy was a Blow hard! He just lost most of his Bitcoins playing poker. He is one of the WORST poker players I have seen. Plus he left his wife and young son home as he gambles away his wife 401k.
sr. member
Activity: 490
Merit: 251
January 18, 2016, 10:40:21 PM
#51
I would like more information

PM me with the questions you have.
legendary
Activity: 1167
Merit: 1009
January 18, 2016, 10:39:09 PM
#50
I would like more information
full member
Activity: 157
Merit: 100
January 17, 2016, 09:54:32 PM
#49
Guys, please take that somewhere else.



This NEEDs to be here. The idiot will fill 10 pages of BS questions then never do anything. Look back at his 4000 posts.
He is very lonely and found Bitcoin 18 months ago. Will ask many questions and never do anything.

He is a FAKE.


sr. member
Activity: 490
Merit: 251
January 17, 2016, 09:40:30 PM
#48
Guys, please take that somewhere else.
full member
Activity: 157
Merit: 100
January 17, 2016, 09:38:51 PM
#47
You need to STOP posting crap. You just post crap to be posting. you need to STFU. You are a fake and Richard head.

And you are now officially on "ignore" status.

Your Father was a very good man. How the heck did you F@#$Ck everything up so bad.
full member
Activity: 157
Merit: 100
January 17, 2016, 09:32:41 PM
#46
None of what we are talking about is even approved by the board yet. So there isn't anything to look up. It is nothing more than a proposal, but I told you all of what I know and got from the PUDs.

It is a proposal to be voted on in March.  The place will be available in March.

EDIT:  Would you hate to sign your name on something, only to find out a few weeks later you will not get 3 cents per kWh?

Again, I'm NOT trying to be difficult.  I only want to KNOW what I'm getting into without something hanging over my head.

You are a fake and full of crap.
full member
Activity: 157
Merit: 100
January 17, 2016, 09:31:19 PM
#45
What I'm about to point out is NOT to create an argument.  It's not to put anyone in a negative light.  I'm simply creating discussion in the forum to make sure all members of the bitcoin mining community are protected and KNOW what they are possibly getting into.  I too am interested in the place.  

HOWEVER, BEFORE COMMITTING TO THIS LOCATION, ONE MIGHT WANT TO CONSIDER THE FOLLOWING:

This is the most important paragraph of the following article:  http://www.govtech.com/dc/articles/High-Capacity-Data-Centers-Blindsided-by-Increase-in-Utilities-Charges.html

Urged by staff, commissioners agreed in December 2014 to impose a moratorium on all new applications for large amounts of power — 1 average megawatt or more — to give staff time to study how to handle a potential spike in demand. The moratorium was later refined to only “high-density” applicants whose businesses would use 250 kilowatt hours of electricity per square foot of space per year, but less than 5 average megawatts overall. Users of more than 5 megawatts need a power contract with the PUD.

Now here is the math:

400 Amp service in the location.  If one uses 80% of the 400 amps to be safe, this would be 320 amps.

320 Amps x 240 Volts = 76,800 Watts OR 76.8 kW

Your demand would be 76.8 kW per hour x 730 hours in a month = 56,064 kWh in a month (730 hours)

56,064 kWh x 12 months in a year = 672,768 kWH

Now, the paragraph wants us to divide the 672,768 kWh in a year by the square feet of the location.  The square feet of the location is 1,000 feet.

672,768 kWh divided by 1,000 square feet = 672.768 kWh per square foot in a year.  THIS IS MORE THAN THE 250 kWh OF ELECTRICITY ALLOWED.

Again, this was NOT to create an argument.  I'm not trying to become enemies with anyone.  I'm simply trying to create discussion to determine if it is worth it or not.

I'm actually interested in the place and I have requested an application to fill out.  However, I'm not following through if I find out it is in Chelan County.  It is sounding more and more like Chelan County may have to be avoided like the plague.

Best Regards,

David

EDIT:  I think, for starters, we need to know the location or at least the county it is in.

You are a fake. I think your wife now knows what a fake you are.  You ran your family business into the ground.
legendary
Activity: 1302
Merit: 1318
Technical Analyst/Trader
January 17, 2016, 09:28:22 PM
#44
You need to STOP posting crap. You just post crap to be posting. you need to STFU. You are a fake and Richard head.

And you are now officially on "ignore" status.
full member
Activity: 157
Merit: 100
January 17, 2016, 09:25:54 PM
#43
The article says the following:

The moratorium was later refined to only “high-density” applicants WHO'S BUSINESS WOULD USE 250 kilowatt hours of electricity per square foot of space per year, but less than 5 average megawatts overall. Users of more than 5 megawatts need a power contract with the PUD.

Since it says, "WHO'S BUSINESS WOULD USE" instead of "WHO'S BUILDING WOULD USE," I would have to be cautious.  I need to find out more from the PUD before signing my name on the dotted line.  Can you tell me what PUD it is?  Is this Chelan or Douglas?

They use the square footage indicated in public records from my conversations with Chelan PUD on previous projects. If there are any objections then the burden of proof is on the customer. They do not come in to perform inspections on your property related to the square footage.

Like I told you in PM, I prefer not to say where it is located until I have a background and credit check.

Why should I bother with giving my personal information if the burden of proof is on the customer?  I'm the customer.  I would hate to drive over 2,500 miles with my belongings and rigs in tow only to find out I will not pay 3 cents per kWh but a little over 5 cents per kWh instead.  I can get 4.5 cents per kWh in Texas.

Would you mind finding a post by the PUD stipulating the moratorium is applied to the entire space of a building even though it is divided into multiple units?

We are paying you a "finders fee" of $1,000.  Will you, "The Finder" provide this information to us please?

I'm not trying to be difficult.  I just think it's important to know.


You need to STOP posting crap. You just post crap to be posting. you need to STFU. You are a fake and Richard head.
sr. member
Activity: 490
Merit: 251
January 17, 2016, 05:41:17 PM
#42
None of what we are talking about is even approved by the board yet. So there isn't anything to look up. It is nothing more than a proposal, but I told you all of what I know and got from the PUDs.

It is a proposal to be voted on in March.  The place will be available in March.

EDIT:  Would you hate to sign your name on something, only to find out a few weeks later you will not get 3 cents per kWh?

Again, I'm NOT trying to be difficult.  I only want to KNOW what I'm getting into without something hanging over my head.

Anyone interested can wait until March if they want.
legendary
Activity: 1302
Merit: 1318
Technical Analyst/Trader
January 17, 2016, 05:32:36 PM
#41
None of what we are talking about is even approved by the board yet. So there isn't anything to look up. It is nothing more than a proposal, but I told you all of what I know and got from the PUDs.

It is a proposal to be voted on in March.  The place will be available in March.

EDIT:  Would you hate to sign your name on something, only to find out a few weeks later you will not get 3 cents per kWh?

Again, I'm NOT trying to be difficult.  I only want to KNOW what I'm getting into without something hanging over my head.
sr. member
Activity: 490
Merit: 251
January 17, 2016, 05:29:17 PM
#40
The article says the following:

The moratorium was later refined to only “high-density” applicants WHO'S BUSINESS WOULD USE 250 kilowatt hours of electricity per square foot of space per year, but less than 5 average megawatts overall. Users of more than 5 megawatts need a power contract with the PUD.

Since it says, "WHO'S BUSINESS WOULD USE" instead of "WHO'S BUILDING WOULD USE," I would have to be cautious.  I need to find out more from the PUD before signing my name on the dotted line.  Can you tell me what PUD it is?  Is this Chelan or Douglas?

They use the square footage indicated in public records from my conversations with Chelan PUD on previous projects. If there are any objections then the burden of proof is on the customer. They do not come in to perform inspections on your property related to the square footage.

Like I told you in PM, I prefer not to say where it is located until I have a background and credit check.

Why should I bother with giving my personal information if the burden of proof is on the customer?  I'm the customer.  I would hate to drive over 2,500 miles with my belongings and rigs in tow only to find out I will not pay 3 cents per kWh but a little over 5 cents per kWh instead.  I can get 4.5 cents per kWh in Texas.

Would you mind finding a post by the PUD stipulating the moratorium is applied to the entire space of a building even though it is divided into multiple units?

We are paying you a "finders fee" of $1,000.  Will you, "The Finder" provide this information to us please?

I'm not trying to be difficult.  I just think it's important to know.

None of what we are talking about is even approved by the board yet. So there isn't anything to look up. It is nothing more than a proposal, but I told you all of what I know and got from the PUDs.
legendary
Activity: 1302
Merit: 1318
Technical Analyst/Trader
January 17, 2016, 05:26:09 PM
#39
The article says the following:

The moratorium was later refined to only “high-density” applicants WHO'S BUSINESS WOULD USE 250 kilowatt hours of electricity per square foot of space per year, but less than 5 average megawatts overall. Users of more than 5 megawatts need a power contract with the PUD.

Since it says, "WHO'S BUSINESS WOULD USE" instead of "WHO'S BUILDING WOULD USE," I would have to be cautious.  I need to find out more from the PUD before signing my name on the dotted line.  Can you tell me what PUD it is?  Is this Chelan or Douglas?

They use the square footage indicated in public records from my conversations with Chelan PUD on previous projects. If there are any objections then the burden of proof is on the customer. They do not come in to perform inspections on your property related to the square footage.

Like I told you in PM, I prefer not to say where it is located until I have a background and credit check.

Why should I bother with giving my personal information if the burden of proof is on the customer?  I'm the customer.  I would hate to drive over 2,500 miles with my belongings and rigs in tow only to find out I will not pay 3 cents per kWh but a little over 5 cents per kWh instead.  I can get 4.5 cents per kWh in Texas.

Would you mind finding a post by the PUD stipulating the moratorium is applied to the entire space of a building even though it is divided into multiple units?

We are paying you a "finders fee" of $1,000.  Will you, "The Finder" provide this information to us please?

I'm not trying to be difficult.  I just think it's important to know.
sr. member
Activity: 490
Merit: 251
January 17, 2016, 05:15:49 PM
#38
The article says the following:

The moratorium was later refined to only “high-density” applicants WHO'S BUSINESS WOULD USE 250 kilowatt hours of electricity per square foot of space per year, but less than 5 average megawatts overall. Users of more than 5 megawatts need a power contract with the PUD.

Since it says, "WHO'S BUSINESS WOULD USE" instead of "WHO'S BUILDING WOULD USE," I would have to be cautious.  I need to find out more from the PUD before signing my name on the dotted line.  Can you tell me what PUD it is?  Is this Chelan or Douglas?

They use the square footage indicated in public records from my conversations with Chelan PUD on previous projects. If there are any objections then the burden of proof is on the customer. They do not come in to perform inspections on your property related to the square footage.

Like I told you in PM, I prefer not to say where it is located until I have a background and credit check.
legendary
Activity: 1302
Merit: 1318
Technical Analyst/Trader
January 17, 2016, 05:11:16 PM
#37
The article says the following:

The moratorium was later refined to only “high-density” applicants WHO'S BUSINESS WOULD USE 250 kilowatt hours of electricity per square foot of space per year, but less than 5 average megawatts overall. Users of more than 5 megawatts need a power contract with the PUD.

Since it says, "WHO'S BUSINESS WOULD USE" instead of "WHO'S BUILDING WOULD USE," I would have to be cautious.  I need to find out more from the PUD before signing my name on the dotted line.  Can you tell me what PUD it is?  Is this Chelan or Douglas?  I need to know so I can call them.

Your thread began with the following advertisement that indicates "1,000 feet":

I have a small data center looking to rent for $1000/month, $1000 deposit, and $1000 finders fee.

Available beginning of March 2016

Must be able to pass credit and background check. $30 application fee.

Includes:
2x 200amp 120/240V single phase panels
16x 30amp outlets, PDUs included with C13 and C20 outlets. C13/C14 and C19/C13 power cables also included.
Rooftop evaporative cooler
3x exhaust fans
Fiber Internet available, modem included.
~1000 sqft
<3cent/kWh electric rate

All you need would be miners, PSUs, network switches and ethernet cables. Would be good for around 60x S7

Located in Central WA.


sr. member
Activity: 490
Merit: 251
January 17, 2016, 05:08:20 PM
#36
The total sqft of the building is not 1000sqft. This building does that fall under high intensity usage, so the rate will be under <3cents/kWh



Are there 2 separate meters?  One for the location next door and one for this location?

How are we to be sure the PUD uses the square foot used by the "metered" space?



You will have to ask the PUD, I can not speak for them.
legendary
Activity: 1302
Merit: 1318
Technical Analyst/Trader
January 17, 2016, 05:04:50 PM
#35
The total sqft of the building is not 1000sqft. This building does that fall under high intensity usage, so the rate will be under <3cents/kWh

Are there 2 separate meters?  One for the location next door and one for this location?

How are we to be sure the PUD uses the square feet used by the "metered" space or for the entire building with multiple meters?

sr. member
Activity: 490
Merit: 251
January 17, 2016, 05:01:43 PM
#34
What I'm about to point out is NOT to create an argument.  It's not to put anyone in a negative light.  I'm simply creating discussion in the forum to make sure all members of the bitcoin mining community are protected and KNOW what they are possibly getting into.  I too am interested in the place.  

HOWEVER, BEFORE COMMITTING TO THIS LOCATION, ONE MIGHT WANT TO CONSIDER THE FOLLOWING:

This is the most important paragraph of the following article:  http://www.govtech.com/dc/articles/High-Capacity-Data-Centers-Blindsided-by-Increase-in-Utilities-Charges.html

Urged by staff, commissioners agreed in December 2014 to impose a moratorium on all new applications for large amounts of power — 1 average megawatt or more — to give staff time to study how to handle a potential spike in demand. The moratorium was later refined to only “high-density” applicants whose businesses would use 250 kilowatt hours of electricity per square foot of space per year, but less than 5 average megawatts overall. Users of more than 5 megawatts need a power contract with the PUD.

Now here is the math:

400 Amp service in the location.  If one uses 80% of the 400 amps to be safe, this would be 320 amps.

320 Amps x 240 Volts = 76,800 Watts OR 76.8 kW

Your demand would be 76.8 kW per hour x 730 hours in a month = 56,064 kWh in a month (730 hours)

56,064 kWh x 12 months in a year = 672,768 kWH

Now, the paragraph wants us to divide the 672,768 kWh in a year by the square feet of the location.  The square feet of the location is 1,000 feet.

672,768 kWh divided by 1,000 square feet = 672.768 kWh per square foot in a year.  THIS IS MORE THAN THE 250 kWh OF ELECTRICITY ALLOWED.

Again, this was NOT to create an argument.  I'm not trying to become enemies with anyone.  I'm simply trying to create discussion to determine if it is worth it or not.

I'm actually interested in the place and I have requested an application to fill out.  However, I'm not following through if I find out it is in Chelan County.  It is sounding more and more like Chelan County may have to be avoided like the plague.

Best Regards,

David

The total sqft of the building is not 1000sqft. This building does that fall under high intensity usage, so the rate will be under <3cents/kWh
legendary
Activity: 1302
Merit: 1318
Technical Analyst/Trader
January 17, 2016, 04:59:16 PM
#33
What I'm about to point out is NOT to create an argument.  It's not to put anyone in a negative light.  I'm simply creating discussion in the forum to make sure all members of the bitcoin mining community are protected and KNOW what they are possibly getting into.  I too am interested in the place.  

HOWEVER, BEFORE COMMITTING TO THIS LOCATION, ONE MIGHT WANT TO CONSIDER THE FOLLOWING:

This is the most important paragraph of the following article:  http://www.govtech.com/dc/articles/High-Capacity-Data-Centers-Blindsided-by-Increase-in-Utilities-Charges.html

Urged by staff, commissioners agreed in December 2014 to impose a moratorium on all new applications for large amounts of power — 1 average megawatt or more — to give staff time to study how to handle a potential spike in demand. The moratorium was later refined to only “high-density” applicants whose businesses would use 250 kilowatt hours of electricity per square foot of space per year, but less than 5 average megawatts overall. Users of more than 5 megawatts need a power contract with the PUD.

Now here is the math:

400 Amp service in the location.  If one uses 80% of the 400 amps to be safe, this would be 320 amps.

320 Amps x 240 Volts = 76,800 Watts OR 76.8 kW

Your demand would be 76.8 kW per hour x 730 hours in a month = 56,064 kWh in a month (730 hours)

56,064 kWh x 12 months in a year = 672,768 kWH

Now, the paragraph wants us to divide the 672,768 kWh in a year by the square feet of the location.  The square feet of the location is 1,000 feet.

672,768 kWh divided by 1,000 square feet = 672.768 kWh per square foot in a year.  THIS IS MORE THAN THE 250 kWh OF ELECTRICITY ALLOWED.

Again, this was NOT to create an argument.  I'm not trying to become enemies with anyone.  I'm simply trying to create discussion to determine if it is worth it or not.

I'm actually interested in the place and I have requested an application to fill out.  However, I'm not following through if I find out it is in Chelan County.  It is sounding more and more like Chelan County may have to be avoided like the plague.

Best Regards,

David

EDIT:  I think, for starters, we need to know the location or at least the county it is in.
newbie
Activity: 20
Merit: 0
January 17, 2016, 03:16:57 PM
#32
Definitely wished I lived closer to take advantage of this... hard to find datacenters where I am located.
sr. member
Activity: 490
Merit: 251
January 17, 2016, 02:50:18 PM
#31
is the lease triple net? lease length?

No. 1 year
sr. member
Activity: 490
Merit: 251
January 17, 2016, 02:49:56 PM
#30
Quote
<3cent/kWh electric rate

Is the rate static or does it vary with season?

Static
member
Activity: 91
Merit: 10
January 17, 2016, 02:34:52 PM
#29
is the lease triple net? lease length?
newbie
Activity: 11
Merit: 0
January 17, 2016, 11:59:21 AM
#28
Quote
<3cent/kWh electric rate

Is the rate static or does it vary with season?
hero member
Activity: 924
Merit: 1000
January 17, 2016, 11:16:05 AM
#27
Any pics to get a better idea of space for those interested?  Or would that impose on the other tenant/s? 
It is a great opportunity for someone just wished I lived on the other side of the mountains.
sr. member
Activity: 490
Merit: 251
January 16, 2016, 10:18:10 PM
#26
couple last questions. sorry for so many.
any windows if so size / type? how many doors & what size / type? How many separate meters for the 3 panels? any neighbors and if so what kind of businesses? building is made of what?

There are a few large windows and a door. Don't know exact sizes. You will have 1 meter. Masonry building. There is a business next door.
member
Activity: 91
Merit: 10
January 16, 2016, 10:13:38 PM
#25
couple last questions. sorry for so many.
any windows if so size / type? how many doors & what size / type? How many separate meters for the 3 panels? any neighbors and if so what kind of businesses? building is made of what?
sr. member
Activity: 490
Merit: 251
January 16, 2016, 10:08:38 PM
#24
member
Activity: 91
Merit: 10
January 16, 2016, 10:06:15 PM
#23
who is paying the cooling?
sr. member
Activity: 490
Merit: 251
January 16, 2016, 09:33:29 PM
#22
is the cooling being powered from the same panels?

No
member
Activity: 91
Merit: 10
January 16, 2016, 09:31:52 PM
#21
is the cooling being powered from the same panels?
sr. member
Activity: 490
Merit: 251
January 16, 2016, 08:58:39 PM
#20
and what is the cooling capacity? raised floor?

No raised floor. I don't have an exact number for you. But it has cooled 100kW before.
member
Activity: 91
Merit: 10
January 16, 2016, 08:54:52 PM
#19
and what is the cooling capacity? raised floor?
sr. member
Activity: 490
Merit: 251
January 16, 2016, 05:23:04 PM
#18
commercial space or residential?

Commercial
member
Activity: 91
Merit: 10
January 16, 2016, 05:22:24 PM
#17
commercial space or residential?
sr. member
Activity: 490
Merit: 251
January 16, 2016, 04:29:33 PM
#16
Fire suppression? Security? Fiber cost / provider? Generator? Cooling capacity?

I assume he would be providing these or his landlord.

That would be the incorrect assumption. Only what is listed is included. Fiber is ~$50/month with Charter
sr. member
Activity: 364
Merit: 250
January 16, 2016, 04:28:06 PM
#15
Fire suppression? Security? Fiber cost / provider? Generator? Cooling capacity?

I assume he would be providing these or his landlord.

Ah, it is just the modem that is included, with the monthly cost for internet added.
member
Activity: 91
Merit: 10
January 16, 2016, 04:03:15 PM
#14
Fire suppression? Security? Fiber cost / provider? Generator? Cooling capacity?
hero member
Activity: 895
Merit: 504
January 16, 2016, 12:55:07 PM
#13
Seems like a very good deal, if I had that many miners to use that much power I would get it. Or, share with someone if they don't have enough either (I only have 10 S7s and 3 Titans).
sr. member
Activity: 429
Merit: 250
January 16, 2016, 12:33:45 PM
#12
Gotcha... I may be interested just need to figure out if it is beneficial for me as well Wink

The numbers make sense and if you have the gear this would be amazing. Goodluck kilo!
legendary
Activity: 980
Merit: 1001
aka "whocares"
January 16, 2016, 02:01:13 AM
#11
Gotcha... I may be interested just need to figure out if it is beneficial for me as well Wink
sr. member
Activity: 490
Merit: 251
January 16, 2016, 01:59:20 AM
#10
I would love to get it but unfortunately I live 1500 miles away and know no one in WA to run it for me. Cry

I could be that someone for a small monthly fee.

What would be that fee? Grin

$300 per month for low maintenance miners.

Gonna do some calculations and be back shortly, are you subleasing it or brokering it.  Are you still mining as well?

Brokering and I do mine myself.

I knew you mined, are you mining in the same building or is it just convenient to get to for you.  I guess I am asking if there is anything that needs to be disclosed or that would be beneficial to know.

The datacenter is a few blocks from where I stay. I rent another place from the same landlord.

Also, I travel a lot between West and East coast. So I am not always around.
sr. member
Activity: 490
Merit: 251
January 16, 2016, 01:58:03 AM
#9
I would love to get it but unfortunately I live 1500 miles away and know no one in WA to run it for me. Cry

I could be that someone for a small monthly fee.

What would be that fee? Grin

$300 per month for low maintenance miners.

Gonna do some calculations and be back shortly, are you subleasing it or brokering it.  Are you still mining as well?

Brokering and I do mine myself.

I knew you mined, are you mining in the same building or is it just convenient to get to for you.  I guess I am asking if there is anything that needs to be disclosed or that would be beneficial to know.

The datacenter is a few blocks from where I stay. I rent another place from the same landlord.
legendary
Activity: 980
Merit: 1001
aka "whocares"
January 16, 2016, 01:50:40 AM
#8
I would love to get it but unfortunately I live 1500 miles away and know no one in WA to run it for me. Cry

I could be that someone for a small monthly fee.

What would be that fee? Grin

$300 per month for low maintenance miners.

Gonna do some calculations and be back shortly, are you subleasing it or brokering it.  Are you still mining as well?

Brokering and I do mine myself.

I knew you mined, are you mining in the same building or is it just convenient to get to for you.  I guess I am asking if there is anything that needs to be disclosed or that would be beneficial to know.
sr. member
Activity: 490
Merit: 251
January 16, 2016, 01:48:05 AM
#7
I would love to get it but unfortunately I live 1500 miles away and know no one in WA to run it for me. Cry

I could be that someone for a small monthly fee.

What would be that fee? Grin

$300 per month for low maintenance miners.

Gonna do some calculations and be back shortly, are you subleasing it or brokering it.  Are you still mining as well?

Brokering and I do mine myself.
legendary
Activity: 980
Merit: 1001
aka "whocares"
January 16, 2016, 01:46:57 AM
#6
I would love to get it but unfortunately I live 1500 miles away and know no one in WA to run it for me. Cry

I could be that someone for a small monthly fee.

What would be that fee? Grin

$300 per month for low maintenance miners.

Gonna do some calculations and be back shortly, are you subleasing it or brokering it.  Are you still mining as well?
sr. member
Activity: 490
Merit: 251
January 16, 2016, 01:41:57 AM
#5
I would love to get it but unfortunately I live 1500 miles away and know no one in WA to run it for me. Cry

I could be that someone for a small monthly fee.

What would be that fee? Grin

$300 per month for low maintenance miners.
legendary
Activity: 980
Merit: 1001
aka "whocares"
January 16, 2016, 01:36:20 AM
#4
I would love to get it but unfortunately I live 1500 miles away and know no one in WA to run it for me. Cry

I could be that someone for a small monthly fee.

What would be that fee? Grin
sr. member
Activity: 490
Merit: 251
January 16, 2016, 12:35:26 AM
#3
I would love to get it but unfortunately I live 1500 miles away and know no one in WA to run it for me. Cry

I could be that someone for a small monthly fee.
legendary
Activity: 980
Merit: 1001
aka "whocares"
January 16, 2016, 12:11:21 AM
#2
I would love to get it but unfortunately I live 1500 miles away and know no one in WA to run it for me. Cry
sr. member
Activity: 490
Merit: 251
January 16, 2016, 12:02:25 AM
#1
Delete
Jump to: