Topic: (WTS) Full Rig - 2 TH/s Steady - Antminer S1's x11 - Corsair Power - Wires etc (Read 3365 times)
September 02, 2014, 07:56:38 PM
Nice setup! But get off ghash! There are 51% attacker. Go on nicehash or westhash!
September 02, 2014, 03:21:21 PM
Where would this ship from?
September 01, 2014, 11:11:57 PM
Thinking about selling my baby. Another member of the family needs money. Ugh.
Come on, you high rollers, get on board with this! You've got plenty of power, room to expand, cooling, loving... wires, hubs, everything. EVERYTHING to plug it in, turn it on, keep it cooled and mining at 2 THs.
Give me ~100 GH/s +/- across the board, you'll see better. These things are truly impressive.
Included are photos of a rack mount I came up with for 6x Antminer S1 Dual Blades. Have added a box fan blowing in the face of the rig and it is now even more impressive. Take a look, please excuse wire management. Going to re-wire soon with cable management in mind.
http://imgur.com/a/n87Pa#0
1) Photo is 3x S1 mounted vertically. This is the back of the first stack showing the heat sinks. Please note the Honeywell Tornado 3 speed adjustable fan underneath. It folds 90 degrees... it is blowing vertically up through the wire base. Air will flow vertically between two towers of miners.
2) Two 3x S1 miner towers set vertically. Considered connections facing outside for both, but then you have intake/exhaust next to each other. So they are side by side.
please excuse cable management, still testing at the time.
3) It is alive... it's alive! Running along nicely. With this format, and no additional fans, if you light a match and hold it on the outside of the miner stack it will be blown out at any of the openings, be that area between miner boards or area between heatsinks. Either side, top to bottom, from 5" away the flame is greatly disturbed, move it vertically and it will go out.
4) TURN YOUR HEAD TO THE RIGHT! Have added a small box fan that blows into and up the rack. A little ram-air for the fans, more circulation, the PSU's can handle more.
The other 5 boxes are hosted in my man's batcave datacenter. He works from home on and has been setup with the tools to be always on and able to host or route or whatever as needed. They are in good hands, and the electricity is priced just right over there! Those machines are powered with CX500s and 600s. No fancy racks, again the electricity and heat not a problem!
https://i.imgur.com/DH3IOjV.jpg
So! Kind of proud of my kit. It does run over 2 THs when all plugged up. Happy to show you that with a screen capture. I may have one!
http://imgur.com/a/u03yk
SO! The rig is for sale, reluctantly. I spent time and some money putting together the best gear I could find to efficiently and practically do the job. And it does! Go look-up what a 2 THs unit costs and get back to me. While looking, remember you'll *most likely* have to host that machine and the cooling fans sound like jet engines.
Seriously, I bought an HP PSU to run some machines and it would do the trick for sure. Then the fan spooled up and I thought satan himself were arriving. So that's gone and back to normal PSUs. All are Corsair, all are properly paperclip tricked, non have been overloaded and shutting off. They can run more miners! One of the HX750's I bought used acted funny from the start, it is going back and being replaced by an HX850. The five units offsite each have a dedicated Corsair quality (new) PSU that can run an S1 normal or overclocked with no issue.
With the power I have on hand (including replacement 850) I am able to run:
3x CX750M - 9 blades (possibly 11 blades)
1x HX750M - 4 blades
1x HX850M - 5 blades (possibly 6 blades)
So... you are looking at the power and S1s with all equipment (fans, switches, cables, power strip) able to run 2 TH/s at home without making an insane amount of noise. With 5 machines offsite, running six machines or 12 blades here. I have the power to run 18 blades, or 9 machines. The S1s are getting super cheap... pickup another 3 machines, no new PSUs, and start pushing 2.6 THs. Yes, you have to pickup the rest of the kit, but then adding over 1/2 THs for the price of 3x S1s... that's under $400 shipped for about 600 GHs. Tempting for me!
Right now running them they do... well, they do generate some heat. The addition of the fans helps with the physical heat and the drain on the hardware. I think my setup is pretty clever and it does cool the machines exceptionally well. Meaning, it keeps my bedroom nice and toasty instead of the machines radiating off each other slowly cooking the whole lot. Kinda sucks in August, I think in another month this will all run with the outside windows open, AC off, fans on, and the temp will be nice for months!
So... if you want to get in and buy quality gear at a reasonable rate this is it. I can ship it all at once in original boxes inside a big box all nice and safely. Local pickup is of course available. Meeting somewhere in the middle is also possible. Now, if you are a thief and that last part got your attention? Move along, little doggie. I don't want drama, messes, morons, thieves, fast-asses, dumbasses, or dipshipts, none of that shit. Trust me... without payment in escrow we both approved nothing further will happen.
I'd like to sell them and put the money into something more wasteful. I'm hoping someone offers me too much money and I have to sell. Otherwise, I'll keep cranking away waiting till btc surge again and my bitcoin pile worth hundreds becomes worth thousands. Bitcoin will have another massive jump in value, followed by volatile market fluctuations. Long term, bitcoin will go up in value by percentages all the naysayers will have to make up lies or rationalizations for. People, the grounds crew and cleaning crews at MS and Google drive Ferraris to work. This is it... get in and get it on.
Perfectly happy mining coin, letting it sit, sell when it is super high and buy low to replenish my account. I want a huge pile of coin, not a bunch of cash outs. When the ship comes in I want as many tickets as possible. If my hand is forced by financial backing I will sell these for sure and move to hosted machines and shoot for 15 THs minium. Hosted. EXPENSIVE>!>!!
Do what I'm doing. This is your chance to print tickets. This is your chance to plug computers into the wall and internet, enter a few commands, and the thing starts printing money. Now... you tell me what's wrong with that? Nothing. Until the govt gets in and fucks it up.
Make an offer! Make a suggestion on how to re-rack / re-arrange for better cooling and looks. This works amazingly well though! So... let's hear from you. Even you folks who want to tell me what a waste and how stupid I am. Join in!
Come on, you high rollers, get on board with this! You've got plenty of power, room to expand, cooling, loving... wires, hubs, everything. EVERYTHING to plug it in, turn it on, keep it cooled and mining at 2 THs.
Give me ~100 GH/s +/- across the board, you'll see better. These things are truly impressive.
Included are photos of a rack mount I came up with for 6x Antminer S1 Dual Blades. Have added a box fan blowing in the face of the rig and it is now even more impressive. Take a look, please excuse wire management. Going to re-wire soon with cable management in mind.
http://imgur.com/a/n87Pa#0
1) Photo is 3x S1 mounted vertically. This is the back of the first stack showing the heat sinks. Please note the Honeywell Tornado 3 speed adjustable fan underneath. It folds 90 degrees... it is blowing vertically up through the wire base. Air will flow vertically between two towers of miners.
2) Two 3x S1 miner towers set vertically. Considered connections facing outside for both, but then you have intake/exhaust next to each other. So they are side by side.
please excuse cable management, still testing at the time.
3) It is alive... it's alive! Running along nicely. With this format, and no additional fans, if you light a match and hold it on the outside of the miner stack it will be blown out at any of the openings, be that area between miner boards or area between heatsinks. Either side, top to bottom, from 5" away the flame is greatly disturbed, move it vertically and it will go out.
4) TURN YOUR HEAD TO THE RIGHT! Have added a small box fan that blows into and up the rack. A little ram-air for the fans, more circulation, the PSU's can handle more.
The other 5 boxes are hosted in my man's batcave datacenter. He works from home on and has been setup with the tools to be always on and able to host or route or whatever as needed. They are in good hands, and the electricity is priced just right over there! Those machines are powered with CX500s and 600s. No fancy racks, again the electricity and heat not a problem!
https://i.imgur.com/DH3IOjV.jpg
So! Kind of proud of my kit. It does run over 2 THs when all plugged up. Happy to show you that with a screen capture. I may have one!
http://imgur.com/a/u03yk
SO! The rig is for sale, reluctantly. I spent time and some money putting together the best gear I could find to efficiently and practically do the job. And it does! Go look-up what a 2 THs unit costs and get back to me. While looking, remember you'll *most likely* have to host that machine and the cooling fans sound like jet engines.
Seriously, I bought an HP PSU to run some machines and it would do the trick for sure. Then the fan spooled up and I thought satan himself were arriving. So that's gone and back to normal PSUs. All are Corsair, all are properly paperclip tricked, non have been overloaded and shutting off. They can run more miners! One of the HX750's I bought used acted funny from the start, it is going back and being replaced by an HX850. The five units offsite each have a dedicated Corsair quality (new) PSU that can run an S1 normal or overclocked with no issue.
With the power I have on hand (including replacement 850) I am able to run:
3x CX750M - 9 blades (possibly 11 blades)
1x HX750M - 4 blades
1x HX850M - 5 blades (possibly 6 blades)
So... you are looking at the power and S1s with all equipment (fans, switches, cables, power strip) able to run 2 TH/s at home without making an insane amount of noise. With 5 machines offsite, running six machines or 12 blades here. I have the power to run 18 blades, or 9 machines. The S1s are getting super cheap... pickup another 3 machines, no new PSUs, and start pushing 2.6 THs. Yes, you have to pickup the rest of the kit, but then adding over 1/2 THs for the price of 3x S1s... that's under $400 shipped for about 600 GHs. Tempting for me!
Right now running them they do... well, they do generate some heat. The addition of the fans helps with the physical heat and the drain on the hardware. I think my setup is pretty clever and it does cool the machines exceptionally well. Meaning, it keeps my bedroom nice and toasty instead of the machines radiating off each other slowly cooking the whole lot. Kinda sucks in August, I think in another month this will all run with the outside windows open, AC off, fans on, and the temp will be nice for months!
So... if you want to get in and buy quality gear at a reasonable rate this is it. I can ship it all at once in original boxes inside a big box all nice and safely. Local pickup is of course available. Meeting somewhere in the middle is also possible. Now, if you are a thief and that last part got your attention? Move along, little doggie. I don't want drama, messes, morons, thieves, fast-asses, dumbasses, or dipshipts, none of that shit. Trust me... without payment in escrow we both approved nothing further will happen.
I'd like to sell them and put the money into something more wasteful. I'm hoping someone offers me too much money and I have to sell. Otherwise, I'll keep cranking away waiting till btc surge again and my bitcoin pile worth hundreds becomes worth thousands. Bitcoin will have another massive jump in value, followed by volatile market fluctuations. Long term, bitcoin will go up in value by percentages all the naysayers will have to make up lies or rationalizations for. People, the grounds crew and cleaning crews at MS and Google drive Ferraris to work. This is it... get in and get it on.
Perfectly happy mining coin, letting it sit, sell when it is super high and buy low to replenish my account. I want a huge pile of coin, not a bunch of cash outs. When the ship comes in I want as many tickets as possible. If my hand is forced by financial backing I will sell these for sure and move to hosted machines and shoot for 15 THs minium. Hosted. EXPENSIVE>!>!!
Do what I'm doing. This is your chance to print tickets. This is your chance to plug computers into the wall and internet, enter a few commands, and the thing starts printing money. Now... you tell me what's wrong with that? Nothing. Until the govt gets in and fucks it up.
Make an offer! Make a suggestion on how to re-rack / re-arrange for better cooling and looks. This works amazingly well though! So... let's hear from you. Even you folks who want to tell me what a waste and how stupid I am. Join in!
Jump to: