WTS GPU server cases | Bitcointalksearch.org

bathrobehero

legendary

Activity: 2002

Merit: 1051

ICO? Not even once.

Quote from: Stedre on November 04, 2018, 12:18:05 PM

Nice contact before buying and very nice cases.

Nevertheless, I can not recommend this provider.

I ordered two cases to Germany to build miners and resell. Both cases arrived damaged, so they are no longer available for resale. Screws were knocked off, handles on the front hung only on one screw and were bent heavily. But above all, there was only a thin foil between the two cases and presumably through the parts of the srews both cases were scratched at several points. Everything was covered with pictures.

And all that was offered after repeated contact, was to send "a few screws and rivets"... Until no further answer came...

Conclusion: EUR 415, - written off...

Sad to hear they still don't package the cases properly. I had the same issue, cases arrived scratched and bent though it was fine for me as I bent it back and didn't mind the scratches. These were much cheaper than other solutions at the time.

These things are way too heavy to be packaged only in a couple layer of foil.

Stedre

newbie

Activity: 3

Merit: 0

Nice contact before buying and very nice cases.

Nevertheless, I can not recommend this provider.

I ordered two cases to Germany to build miners and resell. Both cases arrived damaged, so they are no longer available for resale. Screws were knocked off, handles on the front hung only on one screw and were bent heavily. But above all, there was only a thin foil between the two cases and presumably through the parts of the srews both cases were scratched at several points. Everything was covered with pictures.

And all that was offered after repeated contact, was to send "a few screws and rivets"... Until no further answer came...

Conclusion: EUR 415, - written off...

FlexDesign

newbie

Activity: 14

Merit: 0

Autumn sale !!

get 20% discount if you buy with crypto and get 30% off if you pay for shipping with cash
Shipping to Germany is around 45€ for 2 cases in one box.

Have lots of cases in stock. 3-4 days delivery.

FlexDesign

newbie

Activity: 14

Merit: 0

The best miners in Europe !! Cheesy

We accept cryptocurrency !!!
Order your case now !!
www.flexdesign.lv

AFox

hero member

Activity: 539

Merit: 517

Quote from: FlexDesign on March 26, 2018, 11:26:58 AM

Up
Its the best time to buy your rigs now ! hurry up while stock lasts

Private message sent.

FlexDesign

newbie

Activity: 14

Merit: 0

Up
Its the best time to buy your rigs now ! hurry up while stock lasts

FlexDesign

newbie

Activity: 14

Merit: 0

120mm

For big GPU cooling we are recommending big fans more than 35mm thick with more than 180 m2/h airflow.
example: http://www.scythe-eu.com/en/products/fans/ultra-kaze-120.html

AFox

hero member

Activity: 539

Merit: 517

Hello,
What is the size for the fans ? 120mm, 140mm ?
Thanks

FlexDesign

newbie

Activity: 14

Merit: 0

12 cases are getting painted as we speak but,

6x FX 6.2.6
6x FX 6.3.6

Will order some 12 & 8 GPU cases for next year

If any one wants to place your order its the best time of the year Wink

mthalmei

newbie

Activity: 10

Merit: 0

I already bought one case from you, and am very happy with it.
Do you have any more on stock currently?

jadefalke

legendary

Activity: 1456

Merit: 1014

Hi, do you have currently some in Stock? Do you have a Webpage?

meccaflare0

sr. member

Activity: 336

Merit: 250

Do the thing and you'll have the power.

I dmed, I wana get one and see how I like it and then we gotta talk about a quote for like 65 of them?
Let's stay in touch Wink

azher91

newbie

Activity: 34

Merit: 0

https://www.parallelminer.com/wp-content/uploads/2016/07/12GPUPSUKIT-3.jpg

Can you make something that would fit this PSU?

I need a 8 gpu rig case.
with shipment to Bahrain.

FlexDesign

newbie

Activity: 14

Merit: 0

https://imgur.com/31VeT9W
here is full setup it all works fine

Instatic

newbie

Activity: 22

Merit: 1

are the PCIe cables long enough from PSU to the GPUs
think there some issues ?! there are also some screw's ?

FlexDesign

newbie

Activity: 14

Merit: 0

Yes they are

Instatic

newbie

Activity: 22

Merit: 1

are the cases still available ?

FlexDesign

newbie

Activity: 14

Merit: 0

Here is some new pic of Red and Blue is 8 GPU version haw a look and order yours now
Check facebook - flexdesign.lv for discount code Wink

I have in stock
1xRED 6.4.6
1xBlue 6.3.8
4xBlack 6.3.8
1xPurple 6.4.6
2xBlack 6.3.6

https://i.imgur.com/kxARBk9.jpg
https://i.imgur.com/XeVxjSo.jpg

First few 12 GPU mining Rigs are ready to get painted, they are 8U tall.
They can be mounted back to front & vice versa as well as GPU direction can be changed if you like to blow hot air on PSU Cheesy

https://imgur.com/L9Ow0c2
https://i.imgur.com/eCFimHh.jpg
https://i.imgur.com/dsf13Jn.jpg

Shipping to EU.
Any other countries is 100€ ++ for one case.

ven0m

newbie

Activity: 3

Merit: 0

Bought one 6.3.6 and I'm really happy.

Cards are running ~5-7°C cooler in the case - with fans on 60%.

Also bought silent fans for the case - noise level is quite good.

And it just looks beautiful.

100% would buy again !

FlexDesign

newbie

Activity: 14

Merit: 0

Hi there

I have NEW 8 GPU versions 6.3.8 in production ,ready for painting next week so make your order, there is only 5 cases available next week.

I also have few cases in stock ready for ASAP shipping
4 cases 6.3.6 (6 gpu versions with 2 PSU and Black paint finish)
2 cases 6.4.6 (6 gpu One PSU Right side, purple color

)

Will have more 6.3.6 next week so choose your color and order now Wink

Whisper me and I will give you more info Wink

https://i.imgur.com/uwUGAnU.jpg
https://i.imgur.com/ZXyoQde.jpg
https://i.imgur.com/6g7uwar.jpg
https://i.imgur.com/KHn0AgW.jpg
https://i.imgur.com/TEaCU2I.jpg
https://i.imgur.com/ANr0qQu.jpg

bathrobehero

legendary

Activity: 2002

Merit: 1051

ICO? Not even once.

Bought 2 of these and I'm very happy with them. The package was busted a bit and the cases endured some scratches but they are super sturdy and well designed.

I got about the same temps as cards in frames with plenty of space between them (~20 cm) but the ones in the cases achieved those temps with about 20% less fan speed. And these were 1080 Ti AORUS cards which are super wide and their cooling is not designed to be used in racks (they push air perpendicular to the card and not lengthwise).

Unfortunately, with the 3 fans I have put in the case (EEC0381B1-0000-G99) these are too loud for my liking and since I have plenty of open space I'll be sticking with open frames for now.

If I were to ramp up mining or if sound wouldn't matter I'd be definitely going with these cases.

And compared to other similar cases these are the cheapest.

thesavoyard

sr. member

Activity: 560

Merit: 253

Quote from: PanneKopp on June 06, 2017, 07:29:55 AM

Quote from: indohardware on June 04, 2017, 07:40:00 PM

using GPU not worth it. using ASIC better.

... and again some bullshit from a noob !

Tongue

He does have a trade with caution warning.

PanneKopp

sr. member

Activity: 391

Merit: 250

aka ...

Quote from: indohardware on June 04, 2017, 07:40:00 PM

using GPU not worth it. using ASIC better.

... and again some bullshit from a noob !

Tongue

indohardware

newbie

Activity: 42

Merit: 0

using GPU not worth it. using ASIC better.

PanneKopp

sr. member

Activity: 391

Merit: 250

aka ...

I got an answer (THX),
let´s see how it works out over time,
especially my wanted minor mods ^^.

Cheesy

Yerba

member

Activity: 146

Merit: 10

Originally there was space for 7 GPUs. I asked for 6 GPU cases for me - it gives some little extra room and I have Asrock BTC plates for 6 GPUS.
I guess if You need he will build cases for 7 GPUs also. Blueprints never burn.

JaniHun123

newbie

Activity: 4

Merit: 0

Hello.

For how much are you shipping to the UK?

Thanks.

dexxa05

member

Activity: 87

Merit: 10

Hi,

I send him a PM for 1 unit and get no answer.

Hope he can help me

Thx

altpool-tech

newbie

Activity: 31

Merit: 0

Quote from: indohardware on June 03, 2017, 06:00:01 AM

Is it only cases? can used for all board??

Yes he sell only the case

he make custom for you 6-7 Gpu, and all motherboard fit in the case, we order 10 from him, when we receive we make a little review, we trust in flexdesign Wink

indohardware

newbie

Activity: 42

Merit: 0

Is it only cases? can used for all board??

PanneKopp

sr. member

Activity: 391

Merit: 250

aka ...

Hi @FlexDesign ,

Design looks good so far,
even I´d mention some smaller changes,
2 get a standard server air-flow (from front to back).

2 give you a little promotion, I re-link some of your (bad) pics, 2 make them easy viewable for everyone:

Y7GUpeA (front)

KDSaqWN (mb-space)

KMybOqE (back)

RWanfWB (top-view)

FefbYCh (back2)

Did I get it right, there is space for 6 VGAs ?

Where in the EU are you located ?

How much is shipping to germany ?

Maybe you should contact me, to get a better promotion ^^ .

Grin

PanneKopp (aka...)

mewhoyou

sr. member

Activity: 353

Merit: 250

20 to 50 euro is just for shipping? how do i get a quote?

bathrobehero

legendary

Activity: 2002

Merit: 1051

ICO? Not even once.

Quote from: Yerba on May 29, 2017, 01:05:52 PM

Quote from: bathrobehero on May 19, 2017, 12:32:43 PM

Hey, anyone who has similar cases can tell me what are the temperatures of the cards compared to the usual open rig with plenty of space between the cards?

I have bought around 10+ cases. Very good quality and nice cases indeed. Stackable.

I use for cooling 6 x Scythe ultra kaze 120mm fans.

About temps:

MSI RX480 open rig:
GPU0 t=68C fan=28%, GPU1 t=71C fan=30%, GPU2 t=72C fan=28%, GPU3 t=69C fan=30%, GPU4 t=72C fan=29%, GPU5 t=59C fan=29%

ASUS RX480 in case:
GPU0 t=64C fan=37%, GPU1 t=63C fan=29%, GPU2 t=61C fan=29%, GPU3 t=64C fan=49%, GPU4 t=64C fan=39%, GPU5 t=64C fan=49%

Thank you. I put in an order a couple of days ago for two for starters. Can't wait.

Yerba

member

Activity: 146

Merit: 10

Quote from: bathrobehero on May 19, 2017, 12:32:43 PM

Hey, anyone who has similar cases can tell me what are the temperatures of the cards compared to the usual open rig with plenty of space between the cards?

I have bought around 10+ cases. Very good quality and nice cases indeed. Stackable.

I use for cooling 6 x Scythe ultra kaze 120mm fans.

About temps:

MSI RX480 open rig:
GPU0 t=68C fan=28%, GPU1 t=71C fan=30%, GPU2 t=72C fan=28%, GPU3 t=69C fan=30%, GPU4 t=72C fan=29%, GPU5 t=59C fan=29%

ASUS RX480 in case:
GPU0 t=64C fan=37%, GPU1 t=63C fan=29%, GPU2 t=61C fan=29%, GPU3 t=64C fan=49%, GPU4 t=64C fan=39%, GPU5 t=64C fan=49%

adorid

sr. member

Activity: 445

Merit: 250

There is picture from one of old case versions:

http://i.imgur.com/eYvwrnp.jpg

FlexDesign

newbie

Activity: 14

Merit: 0

We ship from Latvia

Price for EU countries is around from 20 - 50 eur per case

One client told me that temperature is by 10 degrees lower comparing to normal open wooden RIGS ( with rear and middle fun setup)

here is 3 possible solutions for front panel http://i.imgur.com/SG991o5.png

thedue

hero member

Activity: 662

Merit: 500

+1 from where?

sammybtc

newbie

Activity: 69

Merit: 0

+1
I would like to know the price to ship one or 2 in France.
thx

felixbrucker

hero member

Activity: 700

Merit: 500

from where exactly do you ship?

possibly interested in a few

bathrobehero

legendary

Activity: 2002

Merit: 1051

ICO? Not even once.

Hey, anyone who has similar cases can tell me what are the temperatures of the cards compared to the usual open rig with plenty of space between the cards?

Jaz80

full member

Activity: 157

Merit: 100

Quote from: FlexDesign on May 17, 2017, 08:05:28 AM

I offer to make GPU server cases for 19" 4U RAK unit.
There is several versions available like example: One PSU right side, One PSU left side, 2x PSU, longer and shorter cases, as well as for bigger and smaller M/B
for more info please feel free to PM me.
Price for one case is 180 +/- depending on what type of design you chose, + shipping (we ship to EU countries)
If you order more then 10 cases we can talk about discount and some minimal changes in design.
Production usually takes 2 weeks, but we recommend to consider 30 days from order to arrival at your door.
Also you can order any color, from RAL table, you want Wink

http://imgur.com/5teBi7B
http://imgur.com/Y7GUpeA
http://imgur.com/KDSaqWN
http://imgur.com/520nYvS
http://imgur.com/KMybOqE
http://imgur.com/RWanfWB
http://imgur.com/njtVhfx
http://imgur.com/FefbYCh

Can you please pm with your best price for 10 cases shipped to UK. Thanks

FlexDesign

newbie

Activity: 14

Merit: 0

Shipping to USA costs around 100-150$ so its not worth it, there is other ppl selling similar cases in USA Wink

Yes, but they all are the same Wink

once I will make more different designs I will post them. so far there is only few models actually made.
No.

Eyedol-X

hero member

Activity: 952

Merit: 508

Quote from: FlexDesign on May 17, 2017, 08:05:28 AM

I offer to make GPU server cases for 16" RAK unit.
There is several versions available like example: One PSU right side, One PSU left side, 2x PSU, longer and shorter cases, as well as for bigger and smaller M/B
for more info please feel free to PM me.
Price for one case is 180 +/- depending on what type of design you chose, + shipping (we ship to EU countries)
If you order more then 10 cases we can talk about discount and some minimal changes in design.
Production usually takes 2 weeks, but we recommend to consider 30 days from order to arrival at your door.
Also you can order any color, from RAL table, you want Wink

http://imgur.com/5teBi7B
http://imgur.com/Y7GUpeA
http://imgur.com/KDSaqWN
http://imgur.com/520nYvS
http://imgur.com/KMybOqE
http://imgur.com/RWanfWB
http://imgur.com/njtVhfx
http://imgur.com/FefbYCh

Do you ship to USA?

Do you have other photos? Website?

FlexDesign

newbie

Activity: 14

Merit: 0

I offer to make GPU server cases for 19" 4U & 8U RAK unit. From 6 to 8 GPU versions and also 12-16 GPU are ready to ship
There is several versions available like example: One PSU right side, One PSU left side, 2x PSU, longer and shorter cases, as well as for bigger and smaller M/B
for more info please feel free to PM and check out our site www.flexdesign.lv
Price for one case is starting From 180 for 6 GPU version, + shipping (we ship to EU countries, any other countries is 100€ ++)
If you order more then 10 cases we can talk about discount and some minimal changes in design. Check facebook-flexdesign.lv for discount codes.
We recommend to consider 15 days from order to arrival at your door, but for small orders we have few cases in stock ready to ship ASAP.
Also you can order any color, from RAL table, you want Wink

We accept PayPal payments or bank transfer.
AND cryptocurrency !!

http://imgur.com/5teBi7B
http://imgur.com/Y7GUpeA
http://imgur.com/KDSaqWN
http://imgur.com/520nYvS
http://imgur.com/KMybOqE
http://imgur.com/RWanfWB
http://imgur.com/njtVhfx
http://imgur.com/FefbYCh

Front panel solutions http://i.imgur.com/SG991o5.png

First few 12 GPU mining Rigs are ready to get painted, they are 8U tall. 3xPSU
They can be mounted back to front & vice versa as well as GPU direction can be changed if you like to blow hot air on PSU Cheesy

https://imgur.com/L9Ow0c2
https://i.imgur.com/eCFimHh.jpg
https://i.imgur.com/dsf13Jn.jpg

Topic: WTS GPU server cases (Read 5356 times)