Topic: WTS: Klondike K16 (0.55 BTC/ea) (Read 1123 times)
Received the Klondike's today and they are happily hashing away. Thanks shep80!!!!
Escrow has been agreed upon and paid. Shipping info has been sent to OP.
Sale pending while escrow is agreed on.
PM sent
I received my order of K16 avalon gen 1 boards and ended up with 3 K16s that I no longer have power or space for. I am offering these 3 boards for sale (US buyers only) with free USPS flat-rate shipping for 0.55 BTC each. I am open to offers for those wanting two of possibly all three boards.
Each of the three boards I am offering for sale is new in the box as packaged by Steamboat's group buy. These boards are in-hand and can ship within 24 hours via USPS.
For info on the buy and K16s in general see:
http://projectklondike.org/
and
https://bitcointalksearch.org/topic/liquid-synergy-designs-inc-asic-mining-hardware-192916
cgminer (3.6.6) output from some of my running boards, which have all been stable at 350mhz:
Code:
KLN 0: 350MHz 0% 45C | 6.315G/5.623Gh/s | A: 8668 R: 67 HW:13 WU: 78.5/m
KLN 1: 350MHz 0% 42C | 6.187G/5.606Gh/s | A: 8642 R: 74 HW: 3 WU: 78.3/m
KLN 2: 350MHz 0% 52C | 5.696G/5.621Gh/s | A: 8297 R:145 HW: 1 WU: 78.5/m
KLN 3: 350MHz 0% 46C | 6.185G/5.596Gh/s | A: 8719 R: 55 HW: 0 WU: 78.2/m
You will need a PCI power line and a 4 PIN molex style power line (for the fan) to power each board. A PCI power splitter is included if you purchase two or more boards (max of two boards can be run of a single PCI power line).
Boards have mini-USB plugs (USB cable included) for connection to your miner host running cgminer (3.6.6 or greater built with --enable-klondike)
These boards do NOT have a USB bootloader, so if you wish to upgrade the firmware at some point in the future you will have to use a pickit 3 programmer.
Please feel free to private message me any questions or ask them here.
Jump to: