How much for one frame incl. shipping cost to Germany?
i missed this post, was busy lately...70 euro for the frame + 15 euro for shipping, 85 euro total, that is 0.078, i can do 0.075 depend on the btc price
Topic: [WTS] Open Frame Rig (Read 2770 times)
i missed this post, was busy lately...70 euro for the frame + 15 euro for shipping, 85 euro total, that is 0.078, i can do 0.075 depend on the btc price
How much for one frame incl. shipping cost to Germany?
still available if someone is interested
Where are you located? Just wondering about the shipping cost to Toronto, Canada - postal code M6S 3T8?
i'm just sending to a same location in canada, shipping is a bit high, but it depend on how many you order, maybe it can be around $35 only...just checked again, it's 47 euro
Option 3:
Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw
thanks!
Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw
thanks!
but then it would look ugly with the fissure in the alluminium bar, i think the last design do not have any problem anymore
is the "last design" pictured in this thread, curious to see it.
thanks!
yeah the photo is in the first page scroll down a bit
...ok i've added it in the first post, that is the final product that you will receive, when you order one
so you really have 72 gpu? 
A bit less than that, as I haven't mounted cards on two frames yet
Might plan on getting more frames from you in the future if mining profitability looks better.what is your electricity 5 cent? this might explain why you you are going big
My electricity cost is 18.5 cents/kWh with additional data center fees. My profit margin is minimal, but alright.
Where are you located? Just wondering about the shipping cost to Toronto, Canada - postal code M6S 3T8?
i'm just sending to a same location in canada, shipping is a bit high, but it depend on how many you order, maybe it can be around $35 only...just checked again, it's 47 euro
Option 3:
Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw
thanks!
Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw
thanks!
but then it would look ugly with the fissure in the alluminium bar, i think the last design do not have any problem anymore
is the "last design" pictured in this thread, curious to see it.
thanks!
yeah the photo is in the first page scroll down a bit
...ok i've added it in the first post, that is the final product that you will receive, when you order one
so you really have 72 gpu?
A bit less than that, as I haven't mounted cards on two frames yet
Might plan on getting more frames from you in the future if mining profitability looks better.what is your electricity 5 cent? this might explain why you you are going big
Where are you located? Just wondering about the shipping cost to Toronto, Canada - postal code M6S 3T8?
i'm just sending to a same location in canada, shipping is a bit high, but it depend on how many you order, maybe it can be around $35 only...just checked again, it's 47 euro
Option 3:
Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw
thanks!
Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw
thanks!
but then it would look ugly with the fissure in the alluminium bar, i think the last design do not have any problem anymore
is the "last design" pictured in this thread, curious to see it.
thanks!
so you really have 72 gpu?
A bit less than that, as I haven't mounted cards on two frames yet
Might plan on getting more frames from you in the future if mining profitability looks better.
so you really have 72 gpu?
This guy built many frames for me, all of very good quality. Here is a picture of one of my rigs:
price updated to reflect btc value
Hi, can you do a bar or something to be able to hold 3 120mm/140mm fans in front of the gpu's?
Instead of zip ties. (Good idea)
Instead of zip ties. (Good idea)
hi, it's already there, it's the bar in front of the white bar, what i used to secure the 3 x 140mm fan are cable ties, not screw, you just pass one inside the screw hole of the fan and wrap it to the aluminium bar, it's pretty simple and do not require drilling
in that image you posted you can't see the cable ties, because they are wrapped to the 6 pin pcie, look closely to see them
here
Hi, can you do a bar or something to be able to hold 3 120mm/140mm fans in front of the gpu's?
Instead of zip ties. (Good idea)
Instead of zip ties. (Good idea)
from italy, bears in mind that i don't have them ready so you need to wait for the pieces to be bought first
but since with the last order i ordered two(and he want one only) i'll have at least one ready to be shipped this week
but since with the last order i ordered two(and he want one only) i'll have at least one ready to be shipped this week
Damn, Italy may kill the deal for me... I'm pretty sure it will actually... if that was in the OP sorry I didn't see it. Thanks anyway!
it depend where do you live, but for america it's 50 euro the shipping, so yes in that case it would kill it, still the total would be 120 euro, i see users on ebay selling for the same price frame that are worse than mine
from italy, bears in mind that i don't have them ready so you need to wait for the pieces to be bought first
but since with the last order i ordered two(and he want one only) i'll have at least one ready to be shipped this week
but since with the last order i ordered two(and he want one only) i'll have at least one ready to be shipped this week
Damn, Italy may kill the deal for me... I'm pretty sure it will actually... if that was in the OP sorry I didn't see it. Thanks anyway!
Ahh. TY. Too far.
from italy, bears in mind that i don't have them ready so you need to wait for the pieces to be bought first
but since with the last order i ordered two(and he want one only) i'll have at least one ready to be shipped this week
but since with the last order i ordered two(and he want one only) i'll have at least one ready to be shipped this week
I'd also like to know where you're shipping from, and I will definitely take at least one as a test for now, more later if the test goes well. let me know. Thanks!
Where are you shipping from?
up
interested. willing to buy!! whats the awesome total price inc post to aus. will buy alot more in the future, like to see how this will go out about. pm if you can
ok tell me in pm about how many you are interested and i'll build and ship them to you, just tell me your country so i can tell you the shipping cost
interested. willing to buy!! whats the awesome total price inc post to aus. will buy alot more in the future, like to see how this will go out about. pm if you can
Where are you located? Just wondering about the shipping cost to Toronto, Canada - postal code M6S 3T8?
i'm just sending to a same location in canada, shipping is a bit high, but it depend on how many you order, maybe it can be around $35 only...just checked again, it's 47 euro
Option 3:
Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw
thanks!
Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw
thanks!
but then it would look ugly with the fissure in the alluminium bar, i think the last design do not have any problem anymore
Where are you located? Just wondering about the shipping cost to Toronto, Canada - postal code M6S 3T8?
Option 3:
Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw
thanks!
Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw
thanks!
Can you make them stackable?
yes but it need more materials, it will be like mine
but to be honest it's better if you buy a shelf like this
https://www.amazon.com/Gracious-Living-4-Shelf-Light-Shelf/dp/B0083ESFAM/ref=sr_1_5?ie=UTF8&qid=1477031788&sr=8-5&keywords=plastic+shelf
that can handle many of them, than stacking one on top of each other, it's more easy to move in this way
Can you make them stackable?
Been wondering this myself
Can you make them stackable?
Here are some pictures :
(still don't know how to put them in the body)
https://drive.google.com/open?id=0B1pT04MB3X0adl9jalpSdXg5Rkk
https://drive.google.com/open?id=0B1pT04MB3X0acUtReUdWcVBsVnc
Cheers !
(still don't know how to put them in the body)
https://drive.google.com/open?id=0B1pT04MB3X0adl9jalpSdXg5Rkk
https://drive.google.com/open?id=0B1pT04MB3X0acUtReUdWcVBsVnc
Cheers !
price reduced to 0.12 due to btc rise
tnx for the opinion, and the bump
pictures are also welcome for others to see how it looks assembled, i can't do it because ironically i don't have this frame, mine is different because it was my first design
pictures are also welcome for others to see how it looks assembled, i can't do it because ironically i don't have this frame, mine is different because it was my first design
I'd like to leave a big vouch for this man. Received my frame and assembled. The frame itself is aesthetically pleasing, and I seated my rig components with no issues. Will be buying more from him in the future.
anyway i fixed that issue, with the next design, better placement for the psu and a flat bar instead of square one, i only have this bad resolution image for now
Okay actually I'm a moron, I just have tu put the card a little up so that it's the USB and not the card resting on the frame, it's still all fine
PS : enjoy the bump mate !
PS : enjoy the bump mate !
Well IMO there are 2 options, either you move the bar 2_3cm to the back, or you put a les thick (>1cm) bar at this place, option 2 is better because then you won't have smaller cards hangign
I hope this was clear, I'll make a drawing if it's not
Cheers,
Q.
I hope this was clear, I'll make a drawing if it's not
Cheers,
Q.
yeah those were my two options at least, but the small bar can not be attached to the connectors, so you need to screw it, but not above the other side bars, or you will end up with the card not on the same plane, due to the thickness
Well IMO there are 2 options, either you move the bar 2_3cm to the back, or you put a les thick (>1cm) bar at this place, option 2 is better because then you won't have smaller cards hangign
I hope this was clear, I'll make a drawing if it's not
Cheers,
Q.
I hope this was clear, I'll make a drawing if it's not
Cheers,
Q.
Got one from this guy through ebay (didn't know he operated here) and it's really good quality stuff
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
you are the french guy? good, perhaps the risers usb cables touched the "white" bar? i can change that if this is a problem, i don't use usb risers so i did not know about this possible issue
That's me, here's what I'm talking about : https://drive.google.com/file/d/0B1pT04MB3X0aSUo5NkFvMlZwaDQ/view?usp=sharing
Don't have a picture of the 470 because it was a shitty series and burned out, it's in the shop now
yeah i knew about that possible issue, in fact i moved that bar 2 cm toward the right, but it seems that it was not enough, those risers are very long
mh i'll think about a new solution or just move even more that bar on the right(i didn't this because for small gpu it would be an issue to have that bar too far away, i don't want that the gpu angle toward the bottom)
can you tell me if 2cm would be enough so the risers will not bend that way?
Got one from this guy through ebay (didn't know he operated here) and it's really good quality stuff
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
you are the french guy? good, perhaps the risers usb cables touched the "white" bar? i can change that if this is a problem, i don't use usb risers so i did not know about this possible issue
That's me, here's what I'm talking about : https://drive.google.com/file/d/0B1pT04MB3X0aSUo5NkFvMlZwaDQ/view?usp=sharing
Don't have a picture of the 470 because it was a shitty series and burned out, it's in the shop now
Got one from this guy through ebay (didn't know he operated here) and it's really good quality stuff
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
you are the french guy? good, perhaps the risers usb cables touched the "white" bar? i can change that if this is a problem, i don't use usb risers so i did not know about this possible issue
Got one from this guy through ebay (didn't know he operated here) and it's really good quality stuff
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
i'm building and selling these if someone is interested
price: 0.08 btc + shipping
you can screw both psu and ssd to the rig, MB is screwed with M3 nylon screw, 100% insulated, that white wireway is for insulating the bottom of the gpu when you place over it
price: 0.08 btc + shipping
you can screw both psu and ssd to the rig, MB is screwed with M3 nylon screw, 100% insulated, that white wireway is for insulating the bottom of the gpu when you place over it
Jump to: