Topic: [WTS] USB/Ribbon PCI-E Risers!$4.99 and up!+Open Air Mining Frames*FREE SHIPPING (Read 13250 times)

We are currently sold out of USB risers and do not know when we will have more in stock at the moment.

We still have risers in stock.  Prices have been reduced!!

Where is that showing up for you lolwut?

Bitdefender Antivirus Free Edition has blocked a page!

please explain?

Also Execoin now as well right?

Looks good!

I had to get a little creative. There were no mounting brackets for the PSU and the HDD so I used one of the spots to hang my SSD and the PSU is just sitting there.

We're excited to see how your rig turns out!

Order Received. I will post some pics soon!

GRIDSEED MINING FRAMES ARE NOW AVAILABLE ON OUR WEBSITE FOR $99.99

http://www.hashratesolutions.com/products/gridseed-mining-frame

Lou, Mark sent you a personal email regarding your delayed order check your PM's we are on top of this.

i put my order in on the 6th and it is still listed as unfulfilled. just checking when you think it will ship. Order: 1026

We have added pictures of our prototype 10 unit Gridseed mining frame, a bottom rack for the psu will be added.

just ordered mine #1026. Can't wait 

For those of you asking about Gridseed mining frames.

We are currently in the process of designing a mining frame for Gridseed dual asics. 

We will update this thread with pictures and information in the next 2-3 weeks.

I am going to send you a PM, but Chronikka is spot on, we can send the frame semi-assembled to reduce shipping/import cost.

I would consider pm'ing them about shipping charges. I have ordered two of them, and both were sent to me in large boxes already assembled. They are very lightweight but still the box is large. If you ask them directly, it may be possible for them to send you the pieces in a smaller box if you don't mind assembling it yourself. Just a thought.

Also, here is my set up right now, only 50% complete:





As soon as the hardware I just ordered from culexevilman gets here I will be filling out the second level  

I'd love to buy one but the shipping and import charges to Canada make it so expensive

Price:
US $159.99
Shipping:   
To Canada -- US $35.84 -- International Priority Shipping.
Import charges:
US $25.77 (amount confirmed at checkout)
Delivery estimate:   
Tue. Mar. 11 - Mon. Mar. 17

hi update on order?

Thanks for the order culexevilman, we are excited to work with you!

Looking forward to seeing the pictures Chronikka!

They work Great My second one just arrived yesterday. The girlfriend is making me hang out with her today though...so hopefully tomorrow I have some time to set it up and take some more pictures to post.

Those GPU looks so familar,

Anyways, these case looks kick ass. I just ordered one for test purposes. Will make LARGE order if these are just what we need...

We do custom orders as well!! Message us if you need a custom sized frame or rack built!

Looks great Chronikka!!  Your second frame was shipped today!

My case arrived quickly and I'm quite happy 

Very lightweight aluminum and holds my 5 gpus easily. Room for a 6th too. Running BAMT on a flash drive. No monitor or HDD needed.

I made one modification to the left post seen in the picture. There was no way to mount the Power supply to the case securely. So I drilled two holes completely through the left post, found a couple of longer screws and mounted the PSU directly to the case. Also, I placed two rubber strips underneath the PSU to raise it slightly off the metal and reduce vibration.




I ordered a second case identical to this 

I'll post some more pics of them stacked when it arrives.

Oh yes I forgot to write 4x 458mm thanks

Almost Ibrahim! 
Here are the following measurements needed:
4 x 458mm
4 x 229mm
2 x 204mm
2 x 121mm
2 x 64mm

Hi,  i'm going to make my own detritus open frame case. Because I'm using mm to cut the metal are these the right measurements:
4 x 229mm
2 x 204mm
2 x 121mm
2 x 64mm
Thanks

You should do it Eric! lol

And good to know Chronikka!

I paid in bitcoin. Perfectly smooth

That's awesome.  I want to order another rig just so I can see how your shopping cart works with bitcoin!  lol

We accept Bitcoin payments via BitPay on our website www.hashratesolutions.com

Thank you for the purchase Chronikka, we look forward to working with you!

Just placed an order through your site. I'm located just one state to the north of you so I'm hoping to get it quickly to put some pics up here

Updated pictures have been added showing stackable pre-drilled frames with mobo tray, standoffs and screws.

Looks great Eric!

Got my two!  I actually their very first order from their website, #1001.  Due to my customization, they had to make a special order.  But none-the-less, they had it shipped within 3 business days of order!

Note: I had them make mine slightly wider for a tiny additional fee (costs more to ship in two boxes).  I widened the main runners to 19.5" for the flexibility of accommodating two PSUs; whereas, Detritus' original instructions are only 18", which doesn't allow you to stack two PSUs next to each other (leaves like 0.01" of clearance for mobo and two PSUs - that's too tight).

Will be running to Home Depot to pick up some flat pieces and angle pieces for the custom PSU mounts.  I didn't get the kits as I am not sure if I am using one or two PSUs yet.  

The motherboard in the pic is an old EVGA X58 FTW3 I had laying around to test fit a full ATX mobo.

NOTE: I am only using USB-style risers so I don't care where the motherboard is (see my trust to see a reference link).  Do note that if you plan on using ye-old  ribbon cables, you will want to place the motherboard on the LEFT, and the psu(s) on the RIGHT.  This allows the PCIe slots to be centered under all of your GPUs.  The style in the photos below doesn't stretch far enough to reach the first couple of GPUs with ribbon cables.  Again, I only use USB-style risers, which doesn't matter.


(the black anodizing matches my desk perfectly woot!)












Those are my dirty mits and dust on the tubes.  For the most part, the black anodizing is flawlessly done.  Sorry if it looks all beat up - I didn't clean it before the "flash" of the photo and didn't see it until it was uploaded.




Seven (7) GPUs can fit with room to spare in the 19.5" width version.  THere's a solid inch at the end as you can see, so even the normal 18" version can fit 7 GPUs nicely (though you can only use a single PSU - maybe install 7x R9 270s).

anodized black is uber sexy!~

We will have pictures of the stackable frame with tray on the website by Wednesday, and update the forum post.

could I see pics of the frame with the motherboard tray, screws and standoffs installed?

Yea, 0.054 would save you a lot of hassle attaching/removing the connectors.

I made one of these a couple of weeks ago.  Best tubes are the 0.054" wall thickness where the inside is serrated so it grips the nylon connectors well.

What is the right thickness?

You have the wrong thickness of tubing.  You can still make it work but you will have to use a dremel to shave down the inside of the tubing and then use a hammer or rubber mallet to force the connector in.  Also, you will have to be very careful on what pieces you connect first. Since the fit will be so tight, you will not be able to remove the connectors if you mess up.

Hi I noticed that you use 3/4 inch tubing. I also have that tubing but the wrong connectors. My tubing is 1.6mm thick on each side. So the inner hole would equal 3/4" - 3.2 = 15.85 mm. How many mm are your connectors? Would they fit in my tubing?

You should buy one of ours and measure for yourself! .. Google "Detritus Style" mining frame.


**I would also like to add that our BitPay daily limit has been raised and we are able to accept Bitcoin payments for the frames and pci-e risers via www.hashratesolutions.com

Hi, how did you make this because I want to make my own.  What were the measurements of each aluminium tube? Thanks

Sorry again for the delayed response Thyatis!

I have received communications, rig due next week.  Thanks for emailing back, sometimes with the scams that happen it gets worrisome.

Everyone i would hold off dealing with this person.  I have sent him 50% of a system in agreement we had to do a 50% before and 50% after it arrives.  He has never responded to me after receiving the coins.

I am holding off throwing the scam tag up there just yet.


I would like to go on the record by removing the comment above.   They produced a great product and very reliable at this time.  I have some recommendations that i will be discussing with them for some changes.

Thanks for a great product.

please respond to my email
thank you

.

Yes, stackable.

stackable?

$159.99 for a stackable black frame with Mobo tray, screws, standoffs, and pre-drilled holes.

http://www.hashratesolutions.com/products/open-air-detritus-style-litecoin-mining-frame-w-mobo-tray-screws-holes

i wil. take 3 if u can do that

+1 since that's what we all really want to know anyways. 

How much for a turn-key chassis (pre-drilled for stand-offs, PSU, GPUs, etc)? And how fast could you have one in the mail if I bought one like right now?

The motherboard tray and screws will cost extra but we can do that and pre-drill the holes upon request. Yes we do ship internationally.

also would you provide a motherboard tray, pre drill holes and screws? do you ship worldwide?

Yes we can do escrow and make them stackable. We had an order for 2 of these placed on our website friday that shipped out today, I can provide you with some images (cropping out the buyer's info of course) if that would make you more comfortable?

Email me at [email protected]

additionally is there a way to have these stack able

i will take one at least however u r new so will u use escrow or ship first..