Topic: [WTS][EU] KNC Titan Miners from Spain (Read 655 times)

Better re-post the print screens of the advance page.
I am repairing Titan cubes Carlos and 1.9A means that the die is dead !
Good luck with your sale

All miners are running low in temp, and is because that they are running lower than 300Mhz. I think the same, better to post pictures.

Better to post pictures  from miner Advanced Page.

For example, from miner 4. At the moment  I do not see  any cubes  working with all 4 Day Die  at  300 Mhz, as the factory  settings is.

Hi, that not match with my maths. I'll try to set up ONLY a die with 175Mhz to see what happend (software and pool side). If i can, i'll post some pics. My maths tell me the die is 1/2 working. Look at the "Pool Reject" and "Error Rate", but better than talk is show the maths.

Thank you anyway for your aportation, it is the best of this site (and i used a lot in past and present).

Regards,
Carlos

Carlos
some of your cubes have less dies working !!
When you set a die at 150mhz and it consumes 1.9Amper that means the die is dead so you should re-calculate your working dies.
It's good for the future buyers to know what they buy .....

Hi to all; Last week was a too busy week for me. I have a work that needs between 6 and 14 hours/day, and last week was the 14 hours. But i have also a baby (1 year old) and she don't want to sleep by the night and she wants to be with her mother all day. Because of that, my wife wants me at home asap every day -and she hate the word "bitcoin"-, so i cannot manage this sale as i would. My apologies.

In other side, i received a lot of PMs, some of they are responsed, but some people gave me their mobile number to talk. My apologies again, i cannot talk about "bitcoins" at home (my wife) and i have only few time to talk at work, so, please, i prefere other ways of comunication. Anyway, i'll try to contact on monday or tuesday.

And for the important thinks, to make this sale, i prefer to sell all the cubes/controllers to one person/company. If not, i will consider first the bigger offers and go down. At this moment, i'm waiting the answer from one guy.

Thank you very much to all!

still wait answer for some cubes

i want 2 cubes also titan cube
let me know

I might be interested in a controller + eventually 2 or 3 2/4 or 3/4-working cubes if you can make a good price and other people only want the good cubes.
I have currently not the mains power available to run another full Titan set at 1200+W, but I am looking for spare parts and ev. a 5th cube for my currently working set to be sure to ever ROI it..
I propose I wait until you know if and how you can sell to larger buyers all or most and we can talk about what I can afford from the remainings.

Mmmm, you don't want any cube with 3/4 or 2/4 dies working?

I was thinking about selling all my cubes and controllers for 15BTC + shipping, but if i only can sell the full working cubes, who will buy the other cubes?

My offer is for 4 perfectly working cubes from TITAN 4

4x 1,2 =4,8 BTC  + shipping

No controller.

Hi, i have a total of 18+1 Titan Cubes plus 5 controllers and i want to sell all of them (or part):

At this moment, i have theese miners online:

TITAN1 (Gentarkin v1.0.4): 5 cubes (2/4 dies + 2'5/4 dies + 2/4 dies + 4/4 dies + 4/4 dies) = 14'5 dies working
TITAN2 (Gentarkin v0.99e): 5 cubes (3/4 dies + 2'5/4 dies + 3/4 dies + 2/4 dies + 4/4 dies) = 14'5 dies working
TITAN3 (Gentarkin v1.0.4): 2 cubes (3/4 dies + 2'5/4 dies) = 5'5 dies working
TITAN4 (Gentarkin v1.0.4): 6 cubes (3/4 dies +3'5/4 dies + 4/4 dies + 4/4 dies + 4/4 dies + 4/4 dies) = 22'5 dies working
TITAN5 (original software): without cubes

NOTE: All the miners have all protections on and with the Max DCDC Temp set to 75ºC

NOTE2: I have another cube with a problem i could not fix: the power don't reach to the dies and it is not hashing. Two months ago, this cube was hashing with 3/4 dies (so, at 60 Mh/s). Now it is unworking. I tried to repaste, to resolde the comm port, to change the splitter, the data wire, the power supply, the controller, i tried the original software and with the gentarkin software with the same result: 0.000V for each dies, so it is not hashing.

NOTE3: I can sell the miners with the PSU; it could be:
Aerocool Strike-X 1100w (with box)
Corsair RM1000 (with box)
Corsair RM850 (without box)
Corsair RM850 (without box)
Aerocool Templarius 1150w (with box)
Aerocool Templarius 1150w (with box)
Bitmain APW3-12-1600 PSU Series (with 10 PCI-E connectors)
Bitmain APW3-12-1600 PSU Series (with 10 PCI-E connectors)
IBM Bladecenter 2880w with Custom Designed Breakout Board with 22 PCI-e cables
IBM Bladecenter 2880w with Custom Designed Breakout Board with 22 PCI-e cables

I can sell, at least, a controller with 4 cubes. Please, you can make offers, but don't make lowball offers, i will ignore them. I will send from Spain and accept Escrow with SebastianJu or OgNasty. I was thinking to sell each full working cube for 1.2BTC and 0.9BTC for each controller.

Here are all the software pics:

Titan1: (please, click over pic to enlarge, it will work, it is the share.pho.to links)



Titan2: (please, click over pic to enlarge, it will work, it is the share.pho.to links)



Titan3: (please, click over pic to enlarge, it will work, it is the share.pho.to links)



Titan4: (please, click over pic to enlarge, it will work, it is the share.pho.to links)





NOV / 13 / 2016 **** UPDATE:

Here are some pics;

Here are the Titan3 in action:


And the Titan1 & Titan4 are side by side (you can see Titan1 have 5 cubes and Titan4 have 6 cubes):


Titan2 is in another building and i have not any pic atm.