see this thread for sgminer config for 280x
https://bitcointalksearch.org/topic/the-official-x11-thread-updated-dailynow-with-increased-mh-593901
Topic: X11 Help! BOUNTY (Read 667 times)
lowering clock is better for decrease power draw
Hey, Your setup did not work.. But I made some tweaks to it and now its hashing nicely.
I want to make the stress on the card as low as possible so I dont damage it further.
lowering clock is better for decrease power draw
Hey, Your setup did not work.. But I made some tweaks to it and now its hashing nicely.
I want to make the stress on the card as low as possible so I dont damage it further.
lowering clock is better for decrease power draw
Wouldn't lowering intensity to 14 be a better start?
- get sgminer from http://www.filedropper.com/processing/filedownload.php?id=sgminer-51-dev-2014-mod
- get gpu-z from http://www.techpowerup.com/downloads/SysInfo/GPU-Z/ - you will use it to monitor power draw
use bat file:
Without directly monitoring power usage its impossible to be precise but these settings --gpu-clock 700 --gpu-memory 1000 should give you less than 50% of max power draw of 280X
You can run without these swiches just to see how much power is used at default...
- get gpu-z from http://www.techpowerup.com/downloads/SysInfo/GPU-Z/ - you will use it to monitor power draw
use bat file:
Quote
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer --algorithm x11mod -o stratum+tcp://stratum.x11coin:port -u user.pass -p pass -w 64 -I 18 --gpu-clock 700 --gpu-memory 1000
Obviously in stratum+tcp://stratum.x11coin:port -u user.pass -p pass you haver to enter valid pool address / user/password infosetx GPU_USE_SYNC_OBJECTS 1
sgminer --algorithm x11mod -o stratum+tcp://stratum.x11coin:port -u user.pass -p pass -w 64 -I 18 --gpu-clock 700 --gpu-memory 1000
Without directly monitoring power usage its impossible to be precise but these settings --gpu-clock 700 --gpu-memory 1000 should give you less than 50% of max power draw of 280X
You can run without these swiches just to see how much power is used at default...
increase the bounty to .05 and I will do it!
Hey guys.
I need some help with my Computer.
A friend needs help with a project so I need to mine a X11 coin for him.
I tried so much the lst 48 hours to get it to work, but it just wont work.
If someone can write a complete BAT file config for me to use, and tell me what miner to use and it works..
Then ill send 0.01 BTC as a bounty.
Card that I am using: R9 280x Windforce 3x Rev2.0.
The card cant take a full load..
So it has to be 50% power use or a little less. Its a bit damage from Scrypt mining. So yea, I do need a new one.
Thank you!
~Hamuki
I need some help with my Computer.
A friend needs help with a project so I need to mine a X11 coin for him.
I tried so much the lst 48 hours to get it to work, but it just wont work.
If someone can write a complete BAT file config for me to use, and tell me what miner to use and it works..
Then ill send 0.01 BTC as a bounty.
Card that I am using: R9 280x Windforce 3x Rev2.0.
The card cant take a full load..
So it has to be 50% power use or a little less. Its a bit damage from Scrypt mining. So yea, I do need a new one.
Thank you!
~Hamuki
Jump to: