Topic: x11 mining help (Read 914 times)
Both dont work. Looks like rejection town
I have two powercolor 280x's. Here's my stable x11 config. The lower gpu engine one is Elpida and the higher a Hynix card.
c:\sgminer.exe --kernel darkcoin --auto-fan -I 19,19 --thread-concurrency 11200,11200 -w 256,256 -g 1,1 --temp-target 70,70 --temp-overheat 80,80 --temp-cutoff 90,90 --gpu-powertune 20,20 --gpu-engine 1010,1090 --gpu-memclock 1500,1500
Hope it helps some....
c:\sgminer.exe --kernel darkcoin --auto-fan -I 19,19 --thread-concurrency 11200,11200 -w 256,256 -g 1,1 --temp-target 70,70 --temp-overheat 80,80 --temp-cutoff 90,90 --gpu-powertune 20,20 --gpu-engine 1010,1090 --gpu-memclock 1500,1500
Hope it helps some....
Will try that later tyvm
Right this moment the config that gives me less rejected shares (around 20%) is:
del *.bin
sgminer -k darkcoin -o stratum+tcp://XXX -p XXX -I 19 -w 256 -g 1 --lookup-gap 2 --thread-concurrency 8192,8192,8192,8192 --gpu-memclock 1500,1500,1500,1500 --gpu-engine 1175,1175,1175,1175
GPUs are R9280X from Asus
Thank you
del *.bin
sgminer -k darkcoin -o stratum+tcp://XXX -p XXX -I 19 -w 256 -g 1 --lookup-gap 2 --thread-concurrency 8192,8192,8192,8192 --gpu-memclock 1500,1500,1500,1500 --gpu-engine 1175,1175,1175,1175
GPUs are R9280X from Asus
Thank you
Mine configuration (-d 0 is 280X, -d 1 is 270)
Code:
color 0F
sgminer -k darkcoin -d 0,1 -o stratum+tcp://pool -u user -p pass --thread-concurrency 11200,21568 -I 13,19 --gpu-engine 1100,1200 --gpu-memclock 1500,1500 -w 256 -g 2,1 --no-submit-stale --lookup-gap 2 --failover-only -o stratum+tcp://poolBackup -u user -p pass
sgminer -k darkcoin -d 0,1 -o stratum+tcp://pool -u user -p pass --thread-concurrency 11200,21568 -I 13,19 --gpu-engine 1100,1200 --gpu-memclock 1500,1500 -w 256 -g 2,1 --no-submit-stale --lookup-gap 2 --failover-only -o stratum+tcp://poolBackup -u user -p pass
Does anyone have a mining guide for x11?
Already tried g 2, g 4, w128 and the combinations between them
Right this moment the config that gives me less rejected shares (around 20%) is:
del *.bin
sgminer -k darkcoin -o stratum+tcp://XXX -p XXX -I 19 -w 256 -g 1 --lookup-gap 2 --thread-concurrency 8192,8192,8192,8192 --gpu-memclock 1500,1500,1500,1500 --gpu-engine 1175,1175,1175,1175
GPUs are R9280X from Asus
Thank you
del *.bin
sgminer -k darkcoin -o stratum+tcp://XXX -p XXX -I 19 -w 256 -g 1 --lookup-gap 2 --thread-concurrency 8192,8192,8192,8192 --gpu-memclock 1500,1500,1500,1500 --gpu-engine 1175,1175,1175,1175
GPUs are R9280X from Asus
Thank you
All that was tried already. Tried several TC and memclocks
Hi guys.
There is a problem with my x11 mining and ive been strugling for days to solve it without any positive result.
The problem is after a small amount of time, I start getting a lot of rejected shares (around 30%)
Will try to describe what Ive done:
- tried several miners. Im now using the miner provided in the DRK thread.
- tried without setting, setting only I (13,18,19,20), tried with full settings I found around the internet.
- instaled new AMD drivers (v14.14) (had 13.12)
- tried with only GPU at a time.
When does it happens? Always! No matter what pool im connected or what x11 coin Im mining. It always happens, always did.
Im using the right kernel and I always delete .bin after any change.
Ive noticed something weird too: sgminer looks freezed when it starts. Normally on the miner it has a "natural flow" of accepted / rejected shares going down the command line. In here it freezes for 2/3 mins and then it shows everything at once.
I dont know whatelse I could do so i would appreciate if someone could help me.
Thank you very much
There is a problem with my x11 mining and ive been strugling for days to solve it without any positive result.
The problem is after a small amount of time, I start getting a lot of rejected shares (around 30%)
Will try to describe what Ive done:
- tried several miners. Im now using the miner provided in the DRK thread.
- tried without setting, setting only I (13,18,19,20), tried with full settings I found around the internet.
- instaled new AMD drivers (v14.14) (had 13.12)
- tried with only GPU at a time.
When does it happens? Always! No matter what pool im connected or what x11 coin Im mining. It always happens, always did.
Im using the right kernel and I always delete .bin after any change.
Ive noticed something weird too: sgminer looks freezed when it starts. Normally on the miner it has a "natural flow" of accepted / rejected shares going down the command line. In here it freezes for 2/3 mins and then it shows everything at once.
I dont know whatelse I could do so i would appreciate if someone could help me.
Thank you very much
Jump to: