Topic: XFX 280X Crossfire Mining Setup (Read 712 times)
I didn't find any difference whether Crossfire was on or off either.
I have been looking around for the answer on why I should disable my crossfire while mining. I am running this setup:
Intel i7-4770k
ASUS Sabertooth Z87
2x XFX Radeon HD 280x Double D
16GB G.Skill Vengence RAM
With Crossfire on, I get ~ 705Kh/s per card. With it disabled, I get the same. Temperatures are the same, and the GPU usage is 99% on each one. See images below:
With Crossfire:
http://imageshack.com/a/img38/1268/4sfv.jpg
Without Crossfire:
http://imageshack.com/a/img850/9596/hrr1.jpg
Am I missing anything or does crossfire not affect mining in a negative way?
Here is my BAT I'm running:
Both cards are running at these settings:
Core clock: 1020MHz
Mem clock: 1500MHz
Voltage : 1.106v
Fan at 100%
*Note* One card runs about 10 degrees warmer than the other. Throughout the day one card will be between 74-76 and the other will be 65-68. I swapped the card's in their PCIe slots and the warmer one is always warmer. I think it has a thermal paste issue, but does anyone else have any other ideas?
Intel i7-4770k
ASUS Sabertooth Z87
2x XFX Radeon HD 280x Double D
16GB G.Skill Vengence RAM
With Crossfire on, I get ~ 705Kh/s per card. With it disabled, I get the same. Temperatures are the same, and the GPU usage is 99% on each one. See images below:
With Crossfire:
http://imageshack.com/a/img38/1268/4sfv.jpg
Without Crossfire:
http://imageshack.com/a/img850/9596/hrr1.jpg
Am I missing anything or does crossfire not affect mining in a negative way?
Here is my BAT I'm running:
Code:
setx ALLOC_PERCENT=100
setx GPU_USE_SYNC_OBJECTS=1
cgminer.exe --scrypt -o ***(Stratum and user/pass info here)*** -I 13 --lookup-gap 2 -g 2 -w 256 --thread-concurrency 8192
setx GPU_USE_SYNC_OBJECTS=1
cgminer.exe --scrypt -o ***(Stratum and user/pass info here)*** -I 13 --lookup-gap 2 -g 2 -w 256 --thread-concurrency 8192
Both cards are running at these settings:
Core clock: 1020MHz
Mem clock: 1500MHz
Voltage : 1.106v
Fan at 100%
*Note* One card runs about 10 degrees warmer than the other. Throughout the day one card will be between 74-76 and the other will be 65-68. I swapped the card's in their PCIe slots and the warmer one is always warmer. I think it has a thermal paste issue, but does anyone else have any other ideas?
Jump to: