aticonfig --list-adapter
aticonfig --od-enable enables overclocking thru aticonfig
aticonfig -help is very usuful
Topic: XFX 5830 Not over clocking (Read 1416 times)
Does the card hang when you OC past 900, or will the ADL just not go farther than 900? Might be a BIOS limitation.
Just says "failed to modify"
Any way to flash the bios using Linux?
Either I'm blind or you still didn't post your catalyst version.
I've had similar trouble with another XFX card. Personally...I'm just staying away from XFX in the future...I know this doesn't help any but...just 2 pennies worth...
Does the card hang when you OC past 900, or will the ADL just not go farther than 900? Might be a BIOS limitation.
Just says "failed to modify"
Any way to flash the bios using Linux?
My guess is that it is a bios limitation.. I was thinking of possibly flashing the bios to allow me to overclock with some voltage tweaks...
Not all cards are the same.. I have 4 identical 5830's and none of them will overclock past 930... voltage is locked ....... each stock voltage is 1.163 but one card is 1.125...... 
Sapphire Xtreme cards
Sapphire Xtreme cards Hmm, I guess I don't know the significance of the voltage being locked. According to CGMiner my voltage is at 1.163 volts as well and it is a Sapphire Xtreme as well. But I do run it at 960Mhz. I used to run it at 970 but the new CGMiner seems to run the cards harder so I backed it down to 960 because I was starting to get HW errors.
Wish I had 4 of them
.Sam
Does the card hang when you OC past 900, or will the ADL just not go farther than 900? Might be a BIOS limitation.
Not all cards are the same.. I have 4 identical 5830's and none of them will overclock past 930... voltage is locked ....... each stock voltage is 1.163 but one card is 1.125...... Sapphire Xtreme cards
Sapphire Xtreme cards I have some 5830's and they suck.... I can never get passed that safe range, Voltage is locked.....
I have no problems overclocking my 5830 to 960Mhz. 300+ Mhs isn't bad.
Sam
I have some 5830's and they suck.... I can never get passed that safe range, Voltage is locked.....
"gpu-powertune" : "20",
Isn't the powertune only for 6990's?
Did you try posting in the CGMiner thread? Also I didn't see your Catalyst version in you later post.
Sam
Sorry, of course:
ubuntu@ubuntu:/etc$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 11.04
Release: 11.04
Codename: natty
cgminer-2.7.5
SDK 2.4
Few questions:
What OS?
What diver/SDk?
What version of CGMiner?
What OS?
What diver/SDk?
What version of CGMiner?
Hello,
I'm attempting to overclock my 5830 but it refuses to go over 900mhz
Attempting to interactively change I get the message below:
Temp: 74.5 C
Fan Speed: 46% (2196 RPM)
Engine Clock: 900 MHz
Memory Clock: 300 Mhz
Vddc: 0.983 V
Activity: 99%
Powertune: 0%
Fan autotune is enabled (0-100)
GPU engine clock autotune is enabled (800-960)
Change [A]utomatic [E]ngine [F]an [M]emory [V]oltage [P]owertune
Or press any other key to continue
Enter GPU engine clock speed (80 - 900 Mhz):
960
Value is outside safe range, are you sure?
Failed to modify engine clock speed
My config file:
"intensity" : "8",
"gpu-engine" : "960",
"gpu-fan" : "0-100",
"gpu-memclock" : "300",
"gpu-powertune" : "20",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"auto-fan" : true,
"auto-gpu" : true,
"expiry" : "120",
"failover-only" : true,
"gpu-threads" : "2",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",
I'm attempting to overclock my 5830 but it refuses to go over 900mhz
Attempting to interactively change I get the message below:
Temp: 74.5 C
Fan Speed: 46% (2196 RPM)
Engine Clock: 900 MHz
Memory Clock: 300 Mhz
Vddc: 0.983 V
Activity: 99%
Powertune: 0%
Fan autotune is enabled (0-100)
GPU engine clock autotune is enabled (800-960)
Change [A]utomatic [E]ngine [F]an [M]emory [V]oltage [P]owertune
Or press any other key to continue
Enter GPU engine clock speed (80 - 900 Mhz):
960
Value is outside safe range, are you sure?
Failed to modify engine clock speed
My config file:
"intensity" : "8",
"gpu-engine" : "960",
"gpu-fan" : "0-100",
"gpu-memclock" : "300",
"gpu-powertune" : "20",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"auto-fan" : true,
"auto-gpu" : true,
"expiry" : "120",
"failover-only" : true,
"gpu-threads" : "2",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",
Jump to: