I tried their original Windows version of the private miner. I also use Yam's cpu miner.
The hash rate for Yam is 290h/s, private miner 226 h/s. 5 threads of CPU 3930K Sandybridge, 32 GB memory. So the private miner is worse than Yam miner for me.
Topic: [XMR] How to take advantage of private locked monero.rs miner ? (Read 1225 times)
September 16, 2014, 04:31:54 AM
Also you can directly modify the binary with hexedit:
Use "tab" to switch to ascii mode and use CTRL-s to get the prompt for search :
Then you will find the line
Move the cursor to the begining of the ip and change it to ip and port of your prefered pool :
For exemple 
And then save and quit ! by using CTRL-x and confirm by pressing y
If all goes well you should have something like this :
Code:
hexedit minerd-eu-ip1
Use "tab" to switch to ascii mode and use CTRL-s to get the prompt for search :
Code:
000F49F0 0E 0A 04 08 09 0F 0D 06 01 0C 00 02 0B 07 05 03 0B 08 0C 00 05 02 0F 0D 0A 0E 03 06 07 01 09 04 07 09 03 01 0D 0C 0B 0E 02 06 05 0A ............................................
000F4A1C 04 00 0F 08 72 D5 DE A2 DF 15 F8 67 7B 84 15 0A B7 23 15 57 81 AB D6 90 4D 5A 87 F6 4E 9F 4F C5 C3 D1 2B 40 EA 98 3A E0 5C 45 FA 9C ....r......g{....#.W....MZ..N.O...+@..:.\E..
000F4A48 03 C5 D2 99 66 B2 99 9A 66 02 96 B4 F2 BB 53 8A B5 56 14 1A 88 DB A2 31 03 A3 5A 5C 9A 19 0E DB 40 3F B2 0A 87 C1 44 10 1C 05 19 80 ....f...f.....S..V.....1..Z\....@?....D.....
000F4A74 84 9E 95 1D 6F 33 EB AD 5E E7 CD DC 10 BA 13 92 02 BF 6B 41 DC 78 65 15 F7 BB 27 D0 0A 2C 81 39 37 AA 78 50 3F 1A BF D2 41 00 91 D3 ....o3..^.........kA.xe...'..,.97.xP?...A...
Ascii string to search: 46.105.244.190
000F4B24 A9 A3 63 15 AA 5F 56 24 D5 B7 F9 89 B6 F1 ED 20 7C 5A E0 FD 36 CA E9 5A 06 42 2C 36 CE 29 35 43 4E FE 98 3D 53 3A F9 74 73 9A 4B A7 ..c.._V$....... |Z..6..Z.B,6.)5CN..=S:.ts.K.
000F4B50 D0 F5 1F 59 6F 4E 81 86 0E 9D AD 81 AF D8 5A 9F A7 05 06 67 EE 34 62 6A 8B 0B 28 BE 6E B9 17 27 47 74 07 26 C6 80 10 3F E0 A0 7E 6F ...YoN........Z....g.4bj..(.n..'Gt.&...?..~o
000F4B7C C6 7E 48 7B 0D 55 0A A5 4A F8 A4 C0 91 E3 E7 9F 97 8E F1 9E 86 76 72 81 50 60 8D D4 7E 9E 5A 41 F3 E5 B0 62 FC 9F 1F EC 40 54 20 7A .~H{.U..J............vr.P`..~.ZA...b....@T z
000F4BA8 E3 E4 1A 00 CE F4 C9 84 4F D7 94 F5 9D FA 95 D8 55 2E 7E 11 24 C3 54 A5 5B DF 72 28 BD FE 6E 28 78 F5 7F E2 0F A5 C4 B2 05 89 7C EF ........O.......U.~.$.T.[.r(..n(x.........|.
Then you will find the line
Code:
000F6308 65 6C 70 00 6E 6F 2D 6C 6F 6E 67 70 6F 6C 6C 00 6E 6F 2D 72 65 64 69 72 65 63 74 00 6E 6F 2D 73 74 72 61 74 75 6D 00 70 72 6F 74 6F elp.no-longpoll.no-redirect.no-stratum.proto
000F6334 63 6F 6C 2D 64 75 6D 70 00 70 72 6F 78 79 00 71 75 69 65 74 00 72 65 74 72 69 65 73 00 72 65 74 72 79 2D 70 61 75 73 65 00 73 63 61 col-dump.proxy.quiet.retries.retry-pause.sca
000F6360 6E 74 69 6D 65 00 73 79 73 6C 6F 67 00 74 68 72 65 61 64 73 00 74 69 6D 65 6F 75 74 00 75 72 6C 00 75 73 65 72 00 75 73 65 72 70 61 ntime.syslog.threads.timeout.url.user.userpa
000F638C 73 73 00 76 65 72 73 69 6F 6E 00 00 73 74 72 61 74 75 6D 2B 74 63 70 3A 2F 2F 34 36 2E 31 30 35 2E 32 34 34 2E 31 39 30 3A 34 34 33 ss.version..stratum+tcp://46.105.244.190:443
000F63B8 00 00 00 00 00 00 00 00 25 73 3A 20 75 6E 73 75 70 70 6F 72 74 65 64 20 6E 6F 6E 2D 6F 70 74 69 6F 6E 20 61 72 67 75 6D 65 6E 74 20 ........%s: unsupported non-option argument
000F63E4 27 25 73 27 0A 00 00 00 00 00 00 00 25 64 20 6D 69 6E 65 72 20 74 68 72 65 61 64 73 20 73 74 61 72 74 65 64 2C 20 75 73 69 6E 67 20 '%s'........%d miner threads started, using
000F6410 27 25 73 27 20 61 6C 67 6F 72 69 74 68 6D 2E 00 05 00 00 00 0D 00 00 00 17 00 00 00 35 00 00 00 61 00 00 00 C1 00 00 00 85 01 00 00 '%s' algorithm..............5...a...........
Move the cursor to the begining of the ip and change it to ip and port of your prefered pool :
Code:
000F638C 73 73 00 76 65 72 73 69 6F 6E 00 00 73 74 72 61 74 75 6D 2B 74 63 70 3A 2F 2F 38 38 2E 31 35 31 2E 31 30 31 2E 32 32 3A 37 37 37 37 ss.version..stratum+tcp://88.151.101.22:7777
And then save and quit ! by using CTRL-x and confirm by pressing y
Code:
000F5F98 D0 03 D3 B8 D3 BB B8 D0 82 DC 5E C3 5E 1F C3 82 29 E2 CB B0 CB 52 B0 29 5A C3 99 77 99 B4 77 5A 1E 2D 33 11 33 3C 11 1E 7B 3D 46 CB ..........^.^...)....R.)Z..w..wZ.-3.3<..{=F.
Save changes (Yes/No/Cancel) ?
000F6048 51 84 50 C6 57 05 7A 0F 7B E4 D3 67 70 24 12 EA 89 E3 AB 13 D3 1C D7 69 27 5B 27 20 6F 72 20 27 7B 27 20 65 78 70 65 63 74 65 64 00 Q.P.W.z.{..gp$.........i'[' or '{' expected.
If all goes well you should have something like this :
Code:
root@sd-56197:/home/netmonk# ./minerd-eu-ip1 -u ****************************************************************************** -t 4 -P
[2014-09-16 11:29:54] Using JSON-RPC 2.0
[2014-09-16 11:29:54] Starting Logrotation
[2014-09-16 11:29:54] 4 miner threads started, using 'cryptonight' algorithm.
* About to connect() to 88.151.101.22 port 7777 (#0)
* Trying 88.151.101.22... * TCP_NODELAY set
* connected
* Connected to 88.151.101.22 (88.151.101.22) port 7777 (#0)
* Connection #0 to host 88.151.101.22 left intact
[2014-09-16 11:29:54] > {"method": "login", "params": {"login": "*********************************************************************************************", "pass": "", "agent": "cpuminer-multi/0.1"}, "id": 1}
[2014-09-16 11:29:54] < {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"513350947294384","job":{"blob":"01009386e0a005ee77d02b158d8adf6940585f3ac3d9123d5a37d9d218e3466507c21a5aca748e0000000069289ff26a0723a4581a48d96f0f2675673f83e7f56d1469d22657ae96320be001","job_id":"219754267297685","target":"b88d0600"},"status":"OK"}}
[2014-09-16 11:29:54] Pool set diff to 10000
[2014-09-16 11:29:54] Stratum detected new block
[2014-09-16 11:30:40] > {"method": "submit", "params": {"id": "513350947294384", "job_id": "219754267297685", "nonce": "ab0a00c0", "result": "82b8358ff2497a6e511ce4aeef8c6d1462634f8fb35c36a830fa7b67c3410400"}, "id":1}
[2014-09-16 11:30:40] < {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2014-09-16 11:30:40] accepted: 1/1 (100.00%), 234.63 H/s at diff 10000 (yay!!!)
September 15, 2014, 04:19:48 PM
.....
In the hosts file, I cannot add port number.
In the hosts file, I cannot add port number.
No, I think that the hosts file does not support that, it just tells Windows where a hostname should resolve to.
If you are running windows, you will have to look into forwarding traffic with your firewall, similar to what netmonk showed in the parent post.
September 15, 2014, 01:04:21 PM
I cannot find the post, but it was sayd that for windows it was a name hardcoded into the binary (not an ip).
If so modifying the host file on your computer would help. Just the port should remain the same on the new target server.
If so modifying the host file on your computer would help. Just the port should remain the same on the new target server.
When you say "host file", is it minerd-eu.exe? How do I modify that?
Check your host file located here:
C:\Windows\System32\drivers\etc\hosts
Edit the file and put in a hostname and ip address. Ideally this will redirect the traffic to this host specified.
You might need to run notepad as Administrator to make changes to the file.
In the hosts file, I cannot add port number.
September 15, 2014, 11:31:01 AM
Thanks for the free promotion, good luck with your pool netmonk.
Serious miners, more info about our miners and pool features here : https://bitcointalksearch.org/topic/monero-mining-pool-monerors-ddos-protected-private-cpu-miner-5-20-boost-758961
Serious miners, more info about our miners and pool features here : https://bitcointalksearch.org/topic/monero-mining-pool-monerors-ddos-protected-private-cpu-miner-5-20-boost-758961
September 15, 2014, 10:50:59 AM
I cannot find the post, but it was sayd that for windows it was a name hardcoded into the binary (not an ip).
If so modifying the host file on your computer would help. Just the port should remain the same on the new target server.
If so modifying the host file on your computer would help. Just the port should remain the same on the new target server.
When you say "host file", is it minerd-eu.exe? How do I modify that?
Check your host file located here:
C:\Windows\System32\drivers\etc\hosts
Edit the file and put in a hostname and ip address. Ideally this will redirect the traffic to this host specified.
You might need to run notepad as Administrator to make changes to the file.
September 15, 2014, 10:14:33 AM
I cannot find the post, but it was sayd that for windows it was a name hardcoded into the binary (not an ip).
If so modifying the host file on your computer would help. Just the port should remain the same on the new target server.
If so modifying the host file on your computer would help. Just the port should remain the same on the new target server.
When you say "host file", is it minerd-eu.exe? How do I modify that?
September 15, 2014, 07:34:53 AM
I cannot find the post, but it was sayd that for windows it was a name hardcoded into the binary (not an ip).
If so modifying the host file on your computer would help. Just the port should remain the same on the new target server.
If so modifying the host file on your computer would help. Just the port should remain the same on the new target server.
September 15, 2014, 07:04:24 AM
do you have instruction for Windows?
September 15, 2014, 05:37:50 AM
Monero.rs had a very aggressive attitude to catch and keep miner with their "improved" private mining software.
Those mining software are supposed to be 5%-12% more hashrate than any public version currently available.
The bad thing is that they are locked on monero.rs pool, with hardcoded ip or name (in the windows version).
As you can see here : https://bitcointalksearch.org/topic/monero-mining-pool-monerors-ddos-protected-private-cpu-miner-5-20-boost-758961
So basically, how to use those supposed improved version on other pool (even private pool) ?
For linux version we know that the IP and the PORT of monero.rs pool server are hardcoded.
For exemple : EUROPE eu.monero.rs node (46.105.244.190:443): http://monero.rs/minerd-eu-ip1.gz
The version 1 of the improved miner point to ip 46.105.244.190 and port 443.
If you are running this program on your local machine (localhost) you can force your tcp/ip stack to redirect this connexion to another ip and port.
For this you need iptable and play with routing table and dnat.
For exemple bending the traffic to point to another pool can be done like this :
To check if ok :you should see the new entry.
This way the improved miner talk to another pool, than the one hardcoded in the binary.
Enjoy !
PS: Dont expect too much improvement, i run it since 3 days now, and my average H/s go to 240 to 250.
PS2: and to fear those who will say the binary will check... it checks nothing even after 3 hours ! and it runs on my pool thing 3 days now without any problem.
Those mining software are supposed to be 5%-12% more hashrate than any public version currently available.
The bad thing is that they are locked on monero.rs pool, with hardcoded ip or name (in the windows version).
As you can see here : https://bitcointalksearch.org/topic/monero-mining-pool-monerors-ddos-protected-private-cpu-miner-5-20-boost-758961
So basically, how to use those supposed improved version on other pool (even private pool) ?
For linux version we know that the IP and the PORT of monero.rs pool server are hardcoded.
For exemple : EUROPE eu.monero.rs node (46.105.244.190:443): http://monero.rs/minerd-eu-ip1.gz
The version 1 of the improved miner point to ip 46.105.244.190 and port 443.
If you are running this program on your local machine (localhost) you can force your tcp/ip stack to redirect this connexion to another ip and port.
For this you need iptable and play with routing table and dnat.
For exemple bending the traffic to point to another pool can be done like this :
Code:
iptables -t nat -A OUTPUT -p tcp -d 46.105.244.190 --dport 443 -j DNAT --to-destination 88.151.101.22:7777
To check if ok :
Code:
iptables -L -vt NAT
This way the improved miner talk to another pool, than the one hardcoded in the binary.
Enjoy !
PS: Dont expect too much improvement, i run it since 3 days now, and my average H/s go to 240 to 250.
PS2: and to fear those who will say the binary will check... it checks nothing even after 3 hours ! and it runs on my pool thing 3 days now without any problem.
Jump to: