Topic: Your hashrate (KH/s) on you pc. (Read 16417 times)

You can determine hashrate  of graphics card at following link

https://miningchamp.com/

I have a Radeon RX 550 on a Custom build and my hashrate is constantly crap @ 8-9 KH/s.
I can stop the program, wait a few seconds; then restart with 50 KH/s, but within 5 minutes,
it dumps to 8-9 KH/s.


Any ideas?

1160 KH/s with 2 HD 7950s

My hashrate is 1060KH/s with HD5970 (@920Mhz - 860KH/s) and HD 5770 (200KH/s) 

680 khash/s with my r9 280x

6990 ~650 Kh/s

450kh/s with hd 6950 and 50 kh/s with phenom x6 1090t

I am running 2 rigs 2.5MH/s right now, hope to expand to 4MH/s

I've got 3 mining PCs.  I mine XPM on the CPUs and alt coins on the GPUs.  Doesn't seem to hurt either performance much - maybe only get 90% performance mining XPM with cgminer running.  cgminer doesn't seem to mind the CPU is getting pounded.  I use an older version of cgminer (2.11.4) that still has the U (utility measure I think) displayed so I can see how many accepteds I get per minute.

I'm not going to venture a guess at XPM performance other than I get 1 XPM every other day.

So for scrypt mining I've got:

AMD FX6300, 4GB ram, XFX HD6950 with shader mod, 800MHz Core, 1250MHz Memory, thread concurrency 8192
I=12 - 175 KH/s and aside from the noise, you can hardly notice any performance hit.  Probably can't game while mining though.
I=13 - 225 Kh/s and almost completely usable for web browsing, word processing, etc.
I=16 - 400 Kh/s and a lot of lag.  Not enjoyable to use while mining.
I=18 - 429 Kh/s - computer barely usable while mining.

Same box with minor overclock:
AMD FX6300, 4GB ram, XFX HD6950 with shader mod, 840MHz Core, 1325MHz Memory, thread concurrency 8192
I=12 - 175 KH/s and aside from the noise, you can hardly notice any performance hit.  still wouldn't game while mining though, but online videos are fine.
I=13 - 230 Kh/s and almost completely usable for web browsing, word processing, etc.  Online videos a little jerky/laggy.
I=16 - 419 Kh/s and a lot of lag.  Not enjoyable to use while mining.
I=18 - 450 Kh/s - computer barely usable while mining.
I=20 - 458 Kh/s - stuff doesn't even show up on the screen for a few seconds. Unusable as a pc at this setting.

The other two I don't mess with much, but here are the details:
C2D E6340, 3 GB ram, XFX HD6950 with shader mod, 840MHz Core, 1325MHz Memory, thread concurrency 8192 (have to use 6144 for some pools)
I=17 - 417 Kh/s - this PC runs kind of hot, but generally performs just a little lower than the first one.

AMD A8 3850, 4 GB ram, generic HD5850 at stock settings (I think 725/1000), thread concurrency 5824
I=18 - 300 Kh/s
I have overclocked this card.  It responds well, but I killed a fan doing it.  I had it doing 390 Kh/s at 940/1100.  It was entirely unstable after mining, and needed a reboot every time.

Something else worth mentioning - increasing intensity above 16 gives diminished returns on all three cards.  The number of accepteds per minute (the U indicator) goes up a little from I=16 to I=18.  It doesn't go up and sometimes even goes down at I=20.  I think that U indicator is important and I don't know why it was removed from newer releases of cgminer.  I think the number of accepteds you get is more important than your hashrate.  I might be wrong, I've only been doing this a short time.  I'd love to hear feedback from other posters.

Hello, new guy here.
I have a HIS 6950 running at 420kh/s all the time and a MSI r9 290 running at around 800 kh/s. I think I can get more out of the r9 but I'm not 100% sure on the .bat commands needed.

bfgminer 3.8.0, 3x 6950 2gb @ 910 core, 1300 mem, ~455 kh/s each, TC 8192, LG:2, 3 threads per, I=16

100-200 on my HD 7770, kinda crummy but I hope to upgrade soon.

I'm getting 400-500 khs with xfx 6970

I have a very old computer that I keep for fun. It has a Pentium pro with a 100 mega hertz processor. One day I decided to mine with it. It only has one core and no graphics card, so I put it on a scrypt pool and got 0.7 khashes/sec. Its amazing how much faster processors are these days.

My current rigs are as follows:

Rig1:
2x Diamond 7970's (750kh/s each)

Rig2:
4x Gigabyte 7950's and 1x XFX 7950 (625kh/s each)

Rig3:
5x Diamond 7970's (750kh/s each)

I managed to lock in an unbelievable price on 5x new R2 290's and am waiting on them to be delivered. As we all know, stock has been an issue for some time now!

Also have two MSI 7970's which i'm trying to find the right config for as they are proving to not like my current 7970 settings. The trial and error continues on that front!

2 of my rigs were self built and can run 6 cards. If you are thinking about building rigs like this, they aren't particularly hard to do... but make sure you have solid parts (i.e motherboard and PSU's). Don't be cheap on these things! Quality is key if you want consistent and reliable results.

~Bundaroo

Getting 320-340KH/s with each of my Sapphire 7870s, total of about 650kH/s. I know I can get more, but since this is my only PC, I don't want to fry anything too soon. Built it as a replacement for my old PC.

I have around 280-320 kh/s with a 7850 card

I'm getting about 320kh/s on my Sapphire HD 7870, i'm boosting the hashrate a bit with my Intel Core i5-2400, getting ~30kh/s using 3 threads.

2 x MSI 7950 getting about 680 kh/s on each at max!
Both raised out of the case with PCI-e extender cables.

More than your 55

cudaminer
GTX 680 360KHs
GTX 660 185KHs

cgminer
R7 260X 210KHs
Radeon 5770 210KHs
Radeon 6570 60KHs (For monitor)

About 1,025 KHs

~200 Kh with r7 260x

pretty underwhelming but i did get the card or free, am thinking of buying a rig soon.

Hmm sapphire cards should go much higher than this. How so low or you don't want to push any more? 

430 KH/S @ HD 6950 Sapphire

On the Gigabyte GTX770 I'm using the autotune mode, I'm way too lazy to try all kinds of settings 
.\cudaminer-2013-11-20\x64\cudaminer.exe -l auto -o stratum+tcp://doge.poolerino.com:3333 -O x:x
Autotune puts config on K16x16

The latest cudaminer update really boosted some khash. I've been testing around with a few cards and a gtx760 went from 150khash to 200khash, which is a decent increase. This is still not close to being as effective as amd cards but its progress. A comparable card of a similar price of amd will probably yield 500khash or so. Currently running two 7950's which gives between 1100-1300khash, but its not too stable past that. I think anyone who wants to be a little more serious about mining should switch cards to amd. You can always sell them at the end, assuming you dont fry them

I'm making 475khash with gigabyte 270X... It's good card because temperature is only 65 degrees while fans spinning at 2800rpm. Not very loud too.
Probably getting another one or 280X.

I use my PC for working and high intensity (-19) makes lots of lagg so I changed iGPU (i5 4670k) priority to 1st in BIOS and plugged screen to motherboard to get nice desktop performance.

What's your cudaminer configuration? Even with the latest cudaminer, I'm getting ~150kh/s. If I use the K16x16, I get that. If I try 16x21, I can get 320 kh/s, but I get the error does not validate on CPU...

At this moment I'm mining with my GTX 770. CudaMiner first mined with ~200 kh's.
Now with the latest update the hashrate has increased to ~340 kh's.

So that's a pretty massive improvement ^^

On my PC it is 20 kh/s with CPU. With all my devices I have round about 20-70 kh/s.

Greetings

around 120 khash/s

Although AMD is the GPU of choice, if you use the brand new cudaminer released this past week your NVIDIA cards will reach much higher than before, also don't mine on laptops or using your CPU unless you just want to keep it low and slow otherwise you'll burn out before it becomes even remotely worth it.

Up to 240 KH/s, CPU QRK.

Around 14 KH/s CPU scrypt

Yep, I know, different algorithms. I was surprised it was that different, but so it goes. Might be a difference in the way the pools work too?

My wife's computer is newer, bigger, faster and she can CPU mine at about 4x my rates.

This weekend, trying to set up GPU scrypt mining on and old laptop, just as a prototype to learn how it's done, before spending money on a GPU scrypt rig.

24 Kh's

My GTX 660 Ti gets around 250-260 khash/s using the latest CUDAMiner.

Asus matrix 7970
720 kH/s

Here a Radeon 5870 ---> 390KH

With my PC i am on 320 kH/s with 7790.

And my Rig has 1850 kH/s with 4x R9 270X.

I've got 2 gigabyte 7950 inside my case, was once my gaming machine, but coins are more fun.  Got 3 fan moving air around the case to keep it cool ish.  Getting about 1.2mh/s.

But also got a mining rig in another room twice as powerful

ati card is beeter,of course,HD6870 ,about 300kh/s on script

I have a Radeon 7990 and I mine with 1 gpu and the other i play games with 

140 KH\s on 6870. With 11 intensity set, it allows me to play some games and browse internet without lags while mining.

Never mine with laptop. It's a really bad idea.

Mine is 0.00, lol.

I have a cheap laptop with integrated graphics.

Guess I have to make a mining rig.

I sold my GPUs in the middle of the summer, I couldn't stand the heat anymore! LOL
Now I am mining with my gaming pc, just 650kh/s, a tiny bitcent a day

mine is horrible like 49KH/s

My hashrate 1 x 5870 = 380 khs

Im mining in approximately 700 khash/s with my latest investment; Gigabyte 280x. Great card by the way, cool and quiet if you have sufficient ventilation in your case.

I occasionally also use my main computer for mining. This one is equipped with old Zotac GTX 470 doing roughly 170 khash/s.

ATI is bettet than nVidia for mining. I've Sapphire R9 280X TOXIC and makes +/- 800 kh/s on script.

Wow, mining @ 4k Lucky you 

Got 330KH/s on my ASUS 6870 with cgminer 3.7.2/

Sitting with CPU @ 40 KH/s (intel i5) (total of 4 cores)
With my 2 GTX 670, I am at about 550-600 KH/s (using cudaminer)

I have my GPU's running for litecoin, and my CPU doing feather.  

Now I need to get my wife to give me $$ so I can buy a mining rig  

note:  One thing that I find nice, is there really is no slow down on my system doing this at 100%.

On my daughters computer, you can't do anything else when it runs just GPU mining.  She has a old 280.

I am @118k with Cuda

how much is that ?

2 x Sapphire 7950 running @ 692 Kh/s each, ~1380 Kh/s total

3X 7870s running at 1100....not bad for my first week imo.

Where can i purchase 280x now !? Stock empty everywhere ! 

280X cards sold out everywhere, so I bought two R9 270X cards. I get around 400kh/s with each, totaling 800kh/s. I know I should get more kh/s, but my rigs can't handle over 17 intensity.  

About 230 kH/s for me.

My (very old) ati radeon Hd 5770 manages 200 kH/s
with intensity 18 and thread concurrency 7168 - the
whole system lags as hell though.

CPU i5 3450 ~30 kH/s

I have 4200Kh/s on may rig system, 6 gigabyte 280x

I'm kind of lost here, been mining with 1400 kilo hash on my other computer running 2x R9 280X cards on the middlecoin pool.
So I installed a new R9 280X in my other computer and fired it up to mine on middlecoin too.

Results where 650 Mega hash...

Just out of curiousity I changed pool to wemineltc and my hashrate went up to 700kilo hash.

Anyone got some ideas to why it won't be efficent on middlecoin?

Bat file

Make sure you use the latest version of Cudaminer (at least 18-12-2013)

My GTX 660ti that normally does 208 now does 300 kh/s!!

90KH/s on macbook air

I wish i had an ati card for this. My GTX660 has around 166 kh/s with cuda miner. I mined around 300 doges, i also got some from faucets.

89kH/s with mac air

100kH/s with i7 4770k 8 Threads

about 400kH/s with Nvidia GTX780 using Cuda Miner.

Those are the values displayed in the CMD Window, on the dashboard I had up to 1000kH/s but thats rare.

AMD Cards are better for that because their technologie is differend from NVIDIA and better for that "mining stuff".

Buy a ati card better to mine. My old 6870 mines 304kh/s

How fast can you dig on your machines?

For mi it is olny 55 kh/s with geforce gtx 650. It is low. How cany i raise it? I wish i had abaut 200 kh/s.
Im using cudaminer 2013-12-10.

Even if you don t know answer- type your hashrate ;P