Hello ,
iam having a problem i have apw7 bitmain psu and 2 miners using it, X3 and Z9 mini . but sometimes (mostly after 6 hours) z9 mini goes offline and i cant even connect to it via IP i just have to unplug it.
Now its ok for 8.33hrs
I cant even copy logs because its not accessible in web browser..
Please help. Thanks
https://imgur.com/a/1o80Q4B
iam having a problem i have apw7 bitmain psu and 2 miners using it, X3 and Z9 mini . but sometimes (mostly after 6 hours) z9 mini goes offline and i cant even connect to it via IP i just have to unplug it.
Now its ok for 8.33hrs
I cant even copy logs because its not accessible in web browser..
Please help. Thanks
https://imgur.com/a/1o80Q4B
What frequence are you running it on!
If running to high it COULD be an explanation!
to begin with...
If Batch 1 try no more than 668 MHz
If Batch 2 or 3 try no more than 637 MHz
If problem not solved then go back to 500 MHz and try!
If that not works reinstall firmware and "UNcheck settings".
If that not works install newest firmware with "UNcheck settings" (you can always go back to may 26 firmware later.
If problem not solved try running on the z9 mini on it's own apw7 and reconnect using the power connectors you today have running the X3.
if that not works run with only board 1
if that not works run with only board 2
if that not works run with only board 3
If that not work setup solution like timer for controlling power and off after like 6 hours wait a minute and power on.
And good luck!