Topic: Zeus Thunder X3 scrypt miner (Read 1015 times)
thanks
more setting from the minera help .
https://getminera.com/help#bfgminer
BFGMINER
Zeus Miner generic
Zeus Miner per device
https://getminera.com/help#bfgminer
BFGMINER
Zeus Miner generic
Code:
--scrypt -S zus:all --set zus:chips=X --set zus:clock=Y
Zeus Miner per device
Code:
--scrypt -S zus:/dev/ttyUSB0 --set zus:chips=6 --set zus:clock=328 -S zus:/dev/ttyUSB1 --set zus:chips=64 --set zus:clock=224
This should cover it till you know more. !!!
https://bitcointalksearch.org/topic/minera-v090-your-next-mining-dashboard-s9l3d3cpuminercgminerbfgminer-596620
same setting work with windows as well as with a linux based OS, if you use bfgminer
This might help some ,
http://cryptominingasic.com/bfgminer-port-for-zeusminer/
https://litecointalk.org/index.php?topic=20477.0
I would use BFG miner over cgminer, bfg is kept up to date including old drivers as needed . cg miner had all scrypt mining support removed after version 3.80 or something like that bfg kept it all .
you many not need this line
if the miner under powers,the above line might be why , bfg was refined to work good with any Zeus miner .
from the bfg README.ASIC:
You should also configure the driver for your specific device:
--set zeusminer:clock=N Clock frequency (default: 328)
--set zeusminer:chips=N Number of chips per device
Blizzard : 6 Cyclone : 96
Hurricane X2: 48 (2*24) Hurricane X3: 64 (2*32)
Thunder X2: 96 (4*24) Thunder X3: 128 (4*32)
Note: if you set this option incorrectly, the device may underperform and/or
misreport hashrate.
For example:
https://bitcointalksearch.org/topic/minera-v090-your-next-mining-dashboard-s9l3d3cpuminercgminerbfgminer-596620
same setting work with windows as well as with a linux based OS, if you use bfgminer
Code:
bfgminer -o stratum+tcp://pool:port -u user -p pass --scrypt -S zus:all --set zus:chips=128 --set zus:clock=328 --set zus:ignore_golden_nonce=1
orCode:
bfgminer -o stratum+tcp://pool:port -u user -p pass --scrypt -S all --set zus:chips=128 --set zus:clock=328
or Code:
bfgminer --scrypt -S all -o stratum+tcp://pool:port -u user -p pass --set zus:chips=128 --set zus:clock=328
This might help some ,
http://cryptominingasic.com/bfgminer-port-for-zeusminer/
https://litecointalk.org/index.php?topic=20477.0
I would use BFG miner over cgminer, bfg is kept up to date including old drivers as needed . cg miner had all scrypt mining support removed after version 3.80 or something like that bfg kept it all .
you many not need this line
Code:
--set zus:ignore_golden_nonce=1
if the miner under powers,the above line might be why , bfg was refined to work good with any Zeus miner .
from the bfg README.ASIC:
You should also configure the driver for your specific device:
--set zeusminer:clock=N Clock frequency (default: 328)
--set zeusminer:chips=N Number of chips per device
Blizzard : 6 Cyclone : 96
Hurricane X2: 48 (2*24) Hurricane X3: 64 (2*32)
Thunder X2: 96 (4*24) Thunder X3: 128 (4*32)
Note: if you set this option incorrectly, the device may underperform and/or
misreport hashrate.
For example:
Code:
bfgminer --scrypt -o stratum+tcp://pool:port -u user -p pass -S zeusminer:\\.\COM3 --set zeusminer:clock=328 --set zeusminer:chips=128
I have a raspberry Pi on the way to run this does anyone know if there is a step by step on how to set this up anywhere. I have never mined with this before so I will need some help. I downloaded miners on a SD card I was told that was the thing to do so I hope I can get this to work. I have a GPU set up at home with an Asrock H81 pro BTC mono and I still can not get windows 7 installed on it. I keep getting select drivers to install and can't get anything to work it has stressed me out if anyone also knows of this I would love some direction.
Jump to: