| Content | Score | Started by | Date posted | ||
 |
 |
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I´m running with about 35 GH/s per stick.
|
n/a | der_wasi | June 15, 2018, 02:25:04 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
so 300 mhz is the max to overclock? how long will it last on 300 without a fan?M…
|
n/a | der_wasi | June 15, 2018, 10:42:04 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Hello. Now i have played with 2pac sticks a while.3 still working and 3 are dead…
|
n/a | der_wasi | June 13, 2018, 10:14:59 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Hello. Now i have played with 2pac sticks a while.3 still working and 3 are dead…
|
n/a | der_wasi | June 12, 2018, 10:51:06 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
12.5 BTC is correct. But there is almost no chance to solve a block while solo m…
|
n/a | der_wasi | June 04, 2018, 10:18:08 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Thanks for answer. As i have 2 Gekko (same PCB), i could compare. There is a di…
|
n/a | der_wasi | May 30, 2018, 11:49:53 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Under 25M, the device become "disabled" after few minutes. Why are you trying t…
|
n/a | der_wasi | May 29, 2018, 09:37:19 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
So what does the vcore part do on the left hand side? I have my usb multimeter h…
|
n/a | der_wasi | April 11, 2018, 11:43:16 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Hello jogger1,the view is alway on the pot, so the heat sink on the side away fr…
|
n/a | der_wasi | April 11, 2018, 09:58:50 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Try starting cgminer with the sudo command:Code:sudo ./cgminer ......
|
n/a | der_wasi | April 08, 2018, 10:00:29 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Ooooww should I be using rasping lite?Raspian Stretch lite is just the usual Str…
|
n/a | der_wasi | April 07, 2018, 03:46:10 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Which operating system do you use?Try the newest version of raspian. The command…
|
n/a | der_wasi | April 06, 2018, 10:25:48 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I've gone through all of page 1 and keep coming up with the same problem. As I s…
|
n/a | der_wasi | April 06, 2018, 08:30:20 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
so, should the next test be to up the hertz on this one or test the other stick…
|
n/a | der_wasi | April 03, 2018, 11:59:38 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
i'll next be able to check it about 17:00hrs UK time. that's approx 28hrs timeOK…
|
n/a | der_wasi | April 02, 2018, 07:52:34 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
currently have the pots pointing towards 5 o'clock running at 250htz. i get abou…
|
n/a | der_wasi | April 02, 2018, 05:56:35 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Ok, running continuously at say 250 mhz? or higher? My setup is 6 2pacs, 2 2pacs…
|
n/a | der_wasi | April 01, 2018, 04:28:06 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Hi thanks for the reply.Yes trying them on their own was the first thing I did.…
|
n/a | der_wasi | March 31, 2018, 12:04:27 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
i'm using a 3amp Orico USB powdered 7way.I´d think that 3 amps is not enough for…
|
n/a | der_wasi | March 30, 2018, 06:26:55 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
http://www.hashingtechno.com/products/Eyeboot-49-Port-USB-Hub-60A-Power-Supply-a…
|
n/a | der_wasi | March 02, 2018, 10:26:02 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
@crishouse: Did you try this?My R PI cannot seem to run for more that 24 hours w…
|
n/a | der_wasi | March 01, 2018, 11:50:45 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
It´s fine. If they do more than expected, great.
|
n/a | der_wasi | February 23, 2018, 11:37:16 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
My R PI cannot seem to run for more that 24 hours without freezing. It's running…
|
n/a | der_wasi | February 22, 2018, 12:15:36 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Try 2 or 3 o´clock at 100 MHz first to avoid any heat issues. That´s the factory…
|
n/a | der_wasi | February 18, 2018, 11:20:37 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Voltage and frequency would be my next suggestion either.The voltage pot has a f…
|
n/a | der_wasi | February 18, 2018, 05:47:05 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I have been using two GekkoScience 2Pac BM1384 Stickminers for about two months…
|
n/a | der_wasi | February 16, 2018, 12:10:47 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Thanks so much for all the information in this forum. I bought two 2PACs a coup…
|
n/a | der_wasi | February 13, 2018, 03:34:51 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
If there are more power supplies involved, are always the same supplies affected…
|
n/a | der_wasi | February 01, 2018, 06:18:00 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
But there is still a problem - the Raspberry gets freezed sometimes (the whole R…
|
n/a | der_wasi | February 01, 2018, 06:11:27 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I have been going over this conversation that was started by thehypnominer. I h…
|
n/a | der_wasi | January 30, 2018, 01:03:21 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Can you share cgminer screenshot with them running at 350?Sure.https://imgur.com…
|
n/a | der_wasi | January 28, 2018, 11:53:09 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Not if they´re set up correctly. Mine are running at 350 MHz for weeks now witho…
|
n/a | der_wasi | January 28, 2018, 09:42:19 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
That really depends on how hot you're running them.I don´t know already. With th…
|
n/a | der_wasi | January 27, 2018, 08:08:30 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I´m planning on rebuilding my "mining environment". I bought a rig for 3.5" hdds…
|
n/a | der_wasi | January 26, 2018, 01:07:25 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
0: BSD 10014510: COMPAC-2 250.00MHz HW:0 | 22.97G / 27.43Gh/s WU:383.2/m...but…
|
n/a | der_wasi | January 22, 2018, 03:08:11 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
For 350 MHz I had to turn it to 6 o´clock or even 7 o´clock.To read it like a cl…
|
n/a | der_wasi | January 22, 2018, 11:31:11 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Like I said, it has a flat side. This side schould be set to about 3 o`clock. Yo…
|
n/a | der_wasi | January 20, 2018, 09:01:22 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
So I just purchased my first 2Pac miner, plugged it in and...nothing. The LED o…
|
n/a | der_wasi | January 20, 2018, 07:02:55 AM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.10.0 Mining software (miners)
What do you mean by "miners"? What hardware do you use?
|
n/a | der_wasi | January 19, 2018, 12:40:53 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I would think you wouldn´t damage the 2Pac but maybe the usb port. The 2Pac shou…
|
n/a | der_wasi | January 19, 2018, 12:39:13 PM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.10.0 Mining software (miners)
I'm using cgminer with a small number of 2pac bitcoin miners. In the USB menu th…
|
n/a | der_wasi | January 18, 2018, 11:51:46 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Unplugging and re-plugging the 2pacs in the hub is annoying, just to get them to…
|
n/a | der_wasi | January 18, 2018, 11:46:07 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
According to the charts, 250MHz optimal should run more like 10W.15 W was my mea…
|
n/a | der_wasi | January 17, 2018, 02:41:10 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Since it's rated @ 36 watts, it SHOULD support 3 sticks. Not if you want to over…
|
n/a | der_wasi | January 17, 2018, 02:05:18 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I had 2 2Pacs on a 30 W hub and 250 MHz was the limit to go.
|
n/a | der_wasi | January 16, 2018, 11:28:14 AM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.10.0 Mining software (miners)
Then you need to check your pool url.
|
n/a | der_wasi | January 15, 2018, 11:20:54 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
My weak point, at the moment, seems to be the Pi, which freezes up at least once…
|
n/a | der_wasi | January 15, 2018, 11:19:37 AM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.10.0 Mining software (miners)
What do you want for details Jay_Pal? I'm sorry I'm new to this and trying to le…
|
n/a | der_wasi | January 15, 2018, 11:10:05 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
For 250 MHz I would calculate with 20 W per stick. So you need a hub with a 80 W…
|
n/a | der_wasi | January 07, 2018, 04:53:39 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Yes, exactly.
|
n/a | der_wasi | January 06, 2018, 12:07:32 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
You can set it to 150 MHz and see if there are any HW errors. If not, it´s fine.…
|
n/a | der_wasi | January 06, 2018, 08:13:38 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
And more importantly... 3 o'clock, with the USB side being 6 o'clock?Exactly
|
n/a | der_wasi | January 05, 2018, 12:20:04 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
And it has ben stable averaging around 3,4 GH/s for the last 12 hours. Do you st…
|
n/a | der_wasi | January 05, 2018, 09:20:48 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
As for the power supply, the hub is having an external power cable and is said t…
|
n/a | der_wasi | January 05, 2018, 04:42:47 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Does it run stable at 4 GH/s? Or is it getting down slowly until it goes zombie?…
|
n/a | der_wasi | January 04, 2018, 05:17:55 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
cgminer 4.10.0 does not support --gekko freqWho told you so? --gekko-2pac-freq i…
|
n/a | der_wasi | January 04, 2018, 05:46:04 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
so which would you recommend for overclocking to at least 225Mhz?I have a 30 W h…
|
n/a | der_wasi | January 04, 2018, 05:27:24 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
The Block Erupter has only 0.5 to 1 A per port. That´s not enough unless you don…
|
n/a | der_wasi | January 03, 2018, 04:05:02 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
You definitely need a hub. Usually they don´t work with the stock usb ports.Buy…
|
n/a | der_wasi | January 03, 2018, 12:51:02 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Did you try the defect one alone? What USB hub are you using? In what position i…
|
n/a | der_wasi | January 03, 2018, 10:55:53 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Hello,I´m just trying to overclock my two 2Pacs a little more. I´m using one (in…
|
n/a | der_wasi | January 02, 2018, 05:40:41 AM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.10.0 Mining software (miners)
You need to start cgminer with the --compac-freq 200 option.Like ./cgminer --com…
|
n/a | der_wasi | December 29, 2017, 01:56:28 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Hi All new issue - running cgminer on Raspbian with 2PAC miner- when trying to c…
|
n/a | der_wasi | December 29, 2017, 04:13:39 AM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.10.0 Mining software (miners)
Does the reboot help then? In my experience, if a miner disappears, you need to…
|
n/a | der_wasi | December 28, 2017, 04:31:41 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I don´t know how that exactly works on windows. But in linux you have to compile…
|
n/a | der_wasi | December 24, 2017, 04:51:20 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
What if you type thiscgminer.exe --gekko-2pac-freq 200 -o stratum+tcp://peercoi…
|
n/a | der_wasi | December 24, 2017, 04:23:20 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Hmm. If you click it, the title says 12V 2A.If you scroll down to item specifics…
|
n/a | der_wasi | December 24, 2017, 03:53:21 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Anyone used one of these hubs to run there 2pacs ?From electrical data should wo…
|
n/a | der_wasi | December 23, 2017, 07:24:20 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Thad shouldn´t be the cause of this issue.I have/had the same issue. I´m just te…
|
n/a | der_wasi | December 20, 2017, 12:05:04 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Something worth reviewing and trying out if the kernel is going down: https://…
|
n/a | der_wasi | December 16, 2017, 01:17:13 PM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.10.0 Mining software (miners)
Hi GuysIm trying this out for the 1st time. I copied the files from github, chan…
|
n/a | der_wasi | December 11, 2017, 02:31:37 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
What are you mining if you don't me asking. I'm making $0.01 a day at 20 GH/s I´…
|
n/a | der_wasi | December 08, 2017, 11:26:36 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I´m running 2 sticks at 250 MHz making currently 0,12 $ a day. Power costs are a…
|
n/a | der_wasi | December 06, 2017, 12:08:37 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
My 2Pac has been running well for several months. However, lately it has started…
|
n/a | der_wasi | December 04, 2017, 01:57:02 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
What frequency are you working with?How is your voltage setting?Is one stick wor…
|
n/a | der_wasi | December 04, 2017, 01:38:13 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I got the kernel panic again. Here is the output that was dumped to the terminal…
|
n/a | der_wasi | December 03, 2017, 06:14:57 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Do you get any HW errors on the zombie going stick? At 200 MHz the voltage pot i…
|
n/a | der_wasi | December 03, 2017, 05:04:24 AM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.10.0 Mining software (miners)
I had similar problems with getting a Gekkoscience 2Pac running. I needed to use…
|
n/a | der_wasi | December 01, 2017, 10:41:57 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Are you getting any HW at 250mhz/1.36v?No they run perfectly. It occurs sometime…
|
n/a | der_wasi | November 28, 2017, 11:49:53 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I have set them to 1.36 V now and they are both running with 250 MHz.The Voltage…
|
n/a | der_wasi | November 27, 2017, 03:52:37 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I just set up my voltage on both sticks slightly above 1,5 V. Starting with 100…
|
n/a | der_wasi | November 27, 2017, 01:55:01 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
The ones that give me this message are hot.Are there other ones running? If yes,…
|
n/a | der_wasi | November 27, 2017, 01:22:58 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
plan to buy one of the 7 port hubs that was listed... but my next question comes…
|
n/a | der_wasi | November 23, 2017, 11:15:40 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Ok. But right now when I run them at 200 MHz I only get around 9 GH. And do you…
|
n/a | der_wasi | November 17, 2017, 01:43:31 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
You don´t need the chart. Just turn the pot clockwise until there are no more ne…
|
n/a | der_wasi | November 17, 2017, 11:23:14 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I think at the left stick the screw is missing.The USB voltage doesn´t change if…
|
n/a | der_wasi | November 17, 2017, 09:21:52 AM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.10.0 Mining software (miners)
I wouldn´t say that USB miners are the past. Like I see it there is no profitabl…
|
n/a | der_wasi | November 15, 2017, 12:37:18 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Do you want to use every port of a 20 port USB hub? If you overclock them to abo…
|
n/a | der_wasi | November 15, 2017, 12:31:17 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I'm trying to configure the 2pac on a raspberry pi but after I finish entering t…
|
n/a | der_wasi | November 13, 2017, 11:03:36 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I can see I have a lot of HW failures.Is this because it does not get the power…
|
n/a | der_wasi | November 13, 2017, 10:50:12 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Yes, I think that should do it for up to four sticks. I calculate 15W per stick.…
|
n/a | der_wasi | November 11, 2017, 11:16:06 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
@tarrantula + DKirk:I think both of your prolems may be an issue with the USB Po…
|
n/a | der_wasi | November 11, 2017, 05:19:31 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Is it possible that there are restrictions of your country?Similar problem here:…
|
n/a | der_wasi | November 07, 2017, 03:42:06 PM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.10.0 Mining software (miners)
Ah ok. I assumed something like that.
|
n/a | der_wasi | November 07, 2017, 12:47:41 PM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.10.0 Mining software (miners)
[2017-11-06 20:32:27.717] Pool: 0 URL: stratum+tcp://solo.ckpool.org:3333 User…
|
n/a | der_wasi | November 07, 2017, 12:22:04 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Hi there the gekko science 2pac run on raspberry pi 3 model B+?Yes, works fine…
|
n/a | der_wasi | November 07, 2017, 12:12:19 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I'm trying on Win 7 x86 and Win 10 x64On Linux Rosa using the "git clone" comman…
|
n/a | der_wasi | November 07, 2017, 12:05:00 PM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.10.0 Mining software (miners)
I do know the usage is much much higher as a result of the pthread libraryIf tha…
|
n/a | der_wasi | November 03, 2017, 12:55:36 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Build cgminer-4.10.0-windows-gekko from the first post, for some reason I can no…
|
n/a | der_wasi | November 03, 2017, 12:48:04 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I gave him an F not for not understanding the formula, but for sucking at algebr…
|
n/a | der_wasi | November 01, 2017, 08:49:22 AM |
Jump to: