| Content | Score | Started by | Date posted | ||
 |
 |
Cointerra Hardware Support **Unofficial Hardware
I am considering selling my Terraminer. I bought it 6 months ago and while it w…
|
n/a | Grayson5 | September 26, 2014, 01:51:05 PM |
|
|
|
CoinTerra announces its first ASIC - Hash-Rate greater than 500 GH/s Hardware
I am considering selling my Terraminer. I bought it 6 months ago and while it w…
|
n/a | Grayson5 | September 26, 2014, 09:48:36 AM |
|
|
|
Cointerra Hardware Support **Unofficial Hardware
Both of my CTA's are running extremely hot, 85 - 115 C and I am experiencing ter…
|
n/a | Grayson5 | August 13, 2014, 09:02:40 PM |
|
|
|
Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip Hardware
Hi,I've had 2 of my S3's now stuck in China customs for 4 days.....?!?! Has any…
|
n/a | Grayson5 | July 25, 2014, 08:13:49 PM |
|
|
|
Cointerra Hardware Support **Unofficial Hardware
I have a bad beagleboner lol. I would like to hook the miner to usb and control…
|
n/a | Grayson5 | July 21, 2014, 10:16:48 AM |
|
|
|
Need S2 IO Board - Help Hardware
Yep, a lightning strike took out my cable modem, router, Terraminer beaglebone,…
|
n/a | Grayson5 | July 19, 2014, 03:19:23 PM |
|
|
|
Need S2 IO Board - Help Hardware
It was the beaglebone. Replaced all 3 IO boards and back up and running.
|
n/a | Grayson5 | July 18, 2014, 10:50:52 PM |
|
|
|
S2 problems Mining support
I am finally back up and running!!!!!!!!!!!!!!It was the beaglebone on all 3 S2'…
|
n/a | Grayson5 | July 18, 2014, 01:38:54 PM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.4.2 Mining software (miners)
Thanks! Appreciate all the help.
|
n/a | Grayson5 | July 17, 2014, 11:27:55 PM |
|
|
|
Cointerra Hardware Support **Unofficial Hardware
Think I got it. Needed version 4.3.4.Will let it run for a bit and see what I g…
|
n/a | Grayson5 | July 17, 2014, 10:34:00 PM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.4.2 Mining software (miners)
Yes! I think that might have done it....thanks!
|
n/a | Grayson5 | July 17, 2014, 10:33:04 PM |
|
|
|
Cointerra Hardware Support **Unofficial Hardware
My beaglebone shorted out on me so I am trying a method to get my Terraminer bac…
|
n/a | Grayson5 | July 17, 2014, 10:24:14 PM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.4.2 Mining software (miners)
Making some progress with the Terraminer. I hooked up both boards directly to my…
|
n/a | Grayson5 | July 17, 2014, 10:18:55 PM |
|
|
|
Please Help Noob finalize his dreams - Need AntminerS1 x3 Remote setup help Mining support
I don't think there is a way to remotely log into an S1. I have Teamviewer set u…
|
n/a | Grayson5 | July 16, 2014, 01:19:47 PM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.4.1 Mining software (miners)
Yes I did before butBooth ASICS are conected to Mixer USB. I want each ASIC to c…
|
n/a | Grayson5 | July 15, 2014, 03:16:23 PM |
|
|
|
Cointerra Hardware Support **Unofficial Hardware
Has anyone here replace the Beaglebone in their Terraminer? Thanks.If you want t…
|
n/a | Grayson5 | July 15, 2014, 02:51:13 PM |
|
|
|
Cointerra Hardware Support **Unofficial Hardware
Has anyone here replace the Beaglebone in their Terraminer? Mine is dead and I j…
|
n/a | Grayson5 | July 15, 2014, 12:54:20 PM |
|
|
|
Need S2 IO Board - Help Hardware
Tried all those and more....even reflashed the SD card. Since I can't connect t…
|
n/a | Grayson5 | July 14, 2014, 07:52:26 AM |
|
|
|
Need S2 IO Board - Help Hardware
Yep, tried that. I think I have exhausted every possibility. I sent an order t…
|
n/a | Grayson5 | July 13, 2014, 07:49:10 PM |
|
|
|
Need S2 IO Board - Help Hardware
Were you having a similar problem with the Ethernet port?Curious to see if this…
|
n/a | Grayson5 | July 13, 2014, 07:44:51 PM |
|
|
|
Terraminer IV already has one dead board (CTA / core) Hardware
I have a similar issue. The miner boots up, and the chaser lights on the both b…
|
n/a | Grayson5 | July 13, 2014, 07:17:10 PM |
|
|
|
Need S2 IO Board - Help Hardware
Yep, tried that. I think I have exhausted every possibility. I sent an order t…
|
n/a | Grayson5 | July 13, 2014, 04:37:21 PM |
|
|
|
Need S2 IO Board - Help Hardware
Below is the screen shot from ipconfig /allI have 5 s1's that are working correc…
|
n/a | Grayson5 | July 12, 2014, 08:17:38 AM |
|
|
|
Need S2 IO Board - Help Hardware
Hi,I've been having problems with all 3 of my S2's - they boot up but won't conn…
|
n/a | Grayson5 | July 11, 2014, 02:41:15 PM |
|
|
|
S2 problems Mining support
Thanks. Here are the settings.I tried to get to the S2 with the direct connect…
|
n/a | Grayson5 | July 11, 2014, 12:21:53 PM |
|
|
|
S2 problems Mining support
OK....a bit of progress.If I connect the S2 directly to my PC via the ethernet c…
|
n/a | Grayson5 | July 11, 2014, 11:40:06 AM |
|
|
|
S2 problems Mining support
Not sure how to insert a graphic here......for the LAN screen shot.The values on…
|
n/a | Grayson5 | July 10, 2014, 07:31:44 PM |
|
|
|
S2 problems Mining support
Here is the output......C:\Users\Grayson>ipconfig /allWindows IP Configuration …
|
n/a | Grayson5 | July 10, 2014, 07:27:44 PM |
|
|
|
S2 problems Mining support
I just changed the setting on my router to a static IP and a subnet of 255.255.2…
|
n/a | Grayson5 | July 10, 2014, 05:12:33 PM |
|
|
|
S2 problems Mining support
I can see all attached devices and their IP's through my router. 5 of my 6 S1's…
|
n/a | Grayson5 | July 10, 2014, 04:34:25 PM |
|
|
|
S2 problems Mining support
When I ipconfig from CMD I get the following:IP: 192.168.1.1IP Subnet mask: 255.…
|
n/a | Grayson5 | July 10, 2014, 04:16:45 PM |
|
|
|
Revive a Dead Antminer S2 with Beaglebone Black Rev. C (off the shelf) Mining support
How hard was it to get the Beaglebone off the AntMiner IO board? I am OK with s…
|
n/a | Grayson5 | July 10, 2014, 11:12:50 AM |
|
|
|
S2 problems Mining support
Also, the lights on the ethernet port never light up. Is there a way to check i…
|
n/a | Grayson5 | July 10, 2014, 07:27:30 AM |
|
|
|
Terraminer won't start up... Hardware
Any suggestions.....I am at a loss here....
|
n/a | Grayson5 | July 10, 2014, 07:21:54 AM |
|
|
|
S2 problems Mining support
The issue is I can't get to the miner settings. After the miner boots I can't l…
|
n/a | Grayson5 | July 10, 2014, 06:02:42 AM |
|
|
|
S2 problems Mining support
I can't even access the miner via my network. 2 of them were set to static IP's…
|
n/a | Grayson5 | July 09, 2014, 11:56:47 PM |
|
|
|
S2 problems Mining support
Hi,I have 3 S2's and they all started having the same problem today. I had to r…
|
n/a | Grayson5 | July 09, 2014, 11:35:56 PM |
|
|
|
Terraminer won't start up... Hardware
Hi,Today I started experiencing a problem with my Terraminer IV. When I plug th…
|
n/a | Grayson5 | July 09, 2014, 11:10:39 PM |
|
|
|
[Troubleshoot] Bitmain AntMiner S2 Red light on Beaglebone Controller Hardware
Just want to add that I had the same problem today after a circuit tripped and o…
|
n/a | Grayson5 | July 03, 2014, 04:11:19 PM |
|
|
|
M's Ant (S1/S2) Monitor v2.1 - now with alerts! Mining software (miners)
Hi,I finally got version 2.1 to work and I have a question. I used the autoscan…
|
n/a | Grayson5 | June 22, 2014, 07:31:46 PM |
|
|
|
[1450 TH] BitMinter.com [1% PPLNS,Pays TxFees +MergedMining,Stratum,GBT,vardiff] Pools
Doc (or someone who can confirm / correct my assumptions),Now that I have a dece…
|
n/a | Grayson5 | June 21, 2014, 08:15:09 AM |
|
|
|
[1450 TH] BitMinter.com [1% PPLNS,Pays TxFees +MergedMining,Stratum,GBT,vardiff] Pools
Doc (or someone who can confirm / correct my assumptions),Now that I have a dece…
|
n/a | Grayson5 | June 20, 2014, 05:14:06 PM |
|
|
|
[1450 TH] BitMinter.com [1% PPLNS,Pays TxFees +MergedMining,Stratum,GBT,vardiff] Pools
No, I just checked also and showing 0's for everything....I'm not at home, but I…
|
n/a | Grayson5 | June 18, 2014, 10:01:26 PM |
|
|
|
[1000 TH] BitMinter.com [1% PPLNS,Pays TxFees +MergedMining,Stratum,GBT,vardiff] Pools
Last week we had a great run.......this week so far....not so much.....come on l…
|
n/a | Grayson5 | June 18, 2014, 02:21:37 PM |
|
|
|
Noise difference in Antminer S2 vs. Spondoolies SP10 Hardware
Hi,I was wondering if anyone has both an S2 and an SP10 and can comment on the n…
|
n/a | Grayson5 | June 09, 2014, 12:51:45 PM |
|
|
|
[1000 TH] BitMinter.com [1% PPLNS,Pays TxFees +MergedMining,Stratum,GBT,vardiff] Pools
Huh......Koi leaves the pool yesterday and today it appears that Fefox is gone.…
|
n/a | Grayson5 | May 29, 2014, 03:04:36 PM |
|
|
|
Terraminer IV - drops to 50% hashing after 24 - 30 hours... Hardware
Well, I've had the problem twice now over the last 5 days. Both times I brought…
|
n/a | Grayson5 | May 26, 2014, 09:53:58 AM |
|
|
|
Terraminer IV - drops to 50% hashing after 24 - 30 hours... Hardware
If you really want to remote power on/off your miner, this company makes Web Pow…
|
n/a | Grayson5 | May 22, 2014, 12:12:10 PM |
|
|
|
Terraminer IV - drops to 50% hashing after 24 - 30 hours... Hardware
If you really want to remote power on/off your miner, this company makes Web Pow…
|
n/a | Grayson5 | May 22, 2014, 11:35:30 AM |
|
|
|
Terraminer IV - drops to 50% hashing after 24 - 30 hours... Hardware
waldohoover - so are you saying that a remote reboot will get the TM back up and…
|
n/a | Grayson5 | May 22, 2014, 11:21:02 AM |
|
|
|
Terraminer IV - drops to 50% hashing after 24 - 30 hours... Hardware
It could be one of two things, either one of your power supplies is tripping its…
|
n/a | Grayson5 | May 22, 2014, 10:52:38 AM |
|
|
|
Terraminer IV - drops to 50% hashing after 24 - 30 hours... Hardware
Hi,I have a Terraminer IV and have been running it for about 3 weeks. I've noti…
|
n/a | Grayson5 | May 21, 2014, 10:34:09 PM |
|
|
|
[1000 TH] BitMinter.com [1% PPLNS,Pays TxFees +MergedMining,Stratum,GBT,vardiff] Pools
I received my S2 yesterday and after opening up the case and re-sitting the cont…
|
n/a | Grayson5 | May 14, 2014, 08:05:18 PM |
|
|
|
[1000 TH] BitMinter.com [1% PPLNS,Pays TxFees +MergedMining,Stratum,GBT,vardiff] Pools
I received my S2 yesterday and after opening up the case and re-sitting the cont…
|
n/a | Grayson5 | May 14, 2014, 12:35:10 PM |
|
|
|
[930 TH] BitMinter.com [1% PPLNS,Pays TxFees + MergedMining,Stratum,GBT,vardiff] Pools
Need folks opinion on PSU's....I recently bought a Terraminer and the power draw…
|
n/a | Grayson5 | May 07, 2014, 06:55:33 AM |
|
|
|
[740 TH] BitMinter.com [1% PPLNS,Pays TxFees + MergedMining,Stratum,GBT,vardiff] Pools
Well....I finally broke the top 50! Got my Terraminer today to add to my 4 S1's…
|
n/a | Grayson5 | April 25, 2014, 05:47:19 PM |
|
|
|
[440 TH] BitMinter.com [1% PPLNS,Pays TxFees + MergedMining,Stratum,GBT,vardiff] Pools
Hi,I recently purchased a Corsair CX750 for my Antminer S1. Has anyone successfu…
|
n/a | Grayson5 | March 21, 2014, 08:48:28 AM |
|
|
|
[440 TH] BitMinter.com [1% PPLNS,Pays TxFees + MergedMining,Stratum,GBT,vardiff] Pools
Hi,I have a questions as to how the "Your Score" percentage is calculated. For e…
|
n/a | Grayson5 | March 20, 2014, 11:48:37 AM |
|
|
|
[440 TH] BitMinter.com [1% PPLNS,Pays TxFees + MergedMining,Stratum,GBT,vardiff] Pools
Hi,I just installed an Antminer S1 on my home network. Since then I have seen m…
|
n/a | Grayson5 | March 18, 2014, 11:13:53 AM |
|
|
|
[440 TH] BitMinter.com [1% PPLNS,Pays TxFees + MergedMining,Stratum,GBT,vardiff] Pools
Is there an additional payout for the person who finds the block?Just started he…
|
n/a | Grayson5 | March 15, 2014, 03:27:56 PM |
Pages:
Jump to: