| Content | Score | Started by | Date posted | ||
 |
 |
Say. If somebody built another small miner... Mining speculation
Yup I'd be interested as well. Still have my 2 R606's and 4 newpacs running and…
|
n/a | mstrozier | March 05, 2021, 02:29:29 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
you can also do the command lsusb and should see something as follows:Code:Bus 0…
|
n/a | mstrozier | April 12, 2020, 11:27:48 AM |
|
|
|
CryptoDredge 0.23.0 — NVIDIA GPU Miner Mining (Altcoins)
I was at 441 on the nvidia driver. Updated to 442.74 and same issue. Does not…
|
n/a | mstrozier | March 21, 2020, 12:44:43 AM |
|
|
|
CryptoDredge 0.23.0 — NVIDIA GPU Miner Mining (Altcoins)
I've had a chance to run this over my rig and it'll work on all old and modern N…
|
n/a | mstrozier | March 20, 2020, 02:21:54 PM |
|
|
|
CryptoDredge 0.23.0 — NVIDIA GPU Miner Mining (Altcoins)
I've had a chance to run this over my rig and it'll work on all old and modern N…
|
n/a | mstrozier | March 20, 2020, 10:03:44 AM |
|
|
|
Official FutureBit Moonlander 2 Driver and Support Thread Mining (Altcoins)
might give that a try. It's a new one just shipped from futurebit directly so p…
|
n/a | mstrozier | January 12, 2020, 06:58:35 PM |
|
|
|
Official FutureBit Moonlander 2 Driver and Support Thread Mining (Altcoins)
I have been having on/off problems with the additional moonlanders so swapped ou…
|
n/a | mstrozier | January 09, 2020, 04:19:41 PM |
|
|
|
Official FutureBit Moonlander 2 Driver and Support Thread Mining (Altcoins)
I been reading through the thread but can’t find it. Why do I get FutureBit erro…
|
n/a | mstrozier | January 02, 2020, 05:40:47 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
[...]I've been off site for a while and catching up. Instead of reboot comman…
|
n/a | mstrozier | December 23, 2019, 11:02:09 AM |
|
|
|
Official FutureBit Moonlander 2 Driver and Support Thread Mining (Altcoins)
Are you using a USB hub or are you plugged directly into a USB port on your comp…
|
n/a | mstrozier | December 25, 2019, 11:49:34 AM |
|
|
|
Official FutureBit Moonlander 2 Driver and Support Thread Mining (Altcoins)
Any ideas on this error:Code:Failed to sanity check in lowl-vcom.c windows_usb_g…
|
n/a | mstrozier | December 24, 2019, 09:27:06 PM |
|
|
|
Official FutureBit Moonlander 2 Driver and Support Thread Mining (Altcoins)
Any fixes for the:Code:[2019-10-31 11:11:59] Started bfgminer 5.4.2-38-g106390aS…
|
n/a | mstrozier | December 23, 2019, 10:31:45 AM |
|
|
|
[ANN] TeamRedMiner 0.6.1 - Ethash/Cryptonight/Chukwa Thread Mining (Altcoins)
@mstroziercan a weak processor? or loaded with somethingI had a similar one, rem…
|
n/a | mstrozier | December 19, 2019, 09:53:03 AM |
|
|
|
[ANN] TeamRedMiner 0.6.1 - Ethash/Cryptonight/Chukwa Thread Mining (Altcoins)
Ok different set of errors when running TeamRedMiner for both Ethash and Chukwa…
|
n/a | mstrozier | December 18, 2019, 10:07:41 AM |
|
|
|
[ANN] TeamRedMiner 0.6.1 - Ethash/Cryptonight/Chukwa Thread Mining (Altcoins)
Think I figured out the issue along with some help Seems memory could be the p…
|
n/a | mstrozier | December 18, 2019, 09:41:47 AM |
|
|
|
[ANN] TeamRedMiner 0.6.1 - Ethash/Cryptonight/Chukwa Thread Mining (Altcoins)
Think I figured out the issue along with some help Seems memory could be the p…
|
n/a | mstrozier | December 17, 2019, 07:28:04 PM |
|
|
|
[ANN] TeamRedMiner 0.6.1 - Ethash/Cryptonight/Chukwa Thread Mining (Altcoins)
Good evening. I've made the switch on my AMD rig over to using TeamRedMiner but…
|
n/a | mstrozier | December 17, 2019, 07:05:26 PM |
|
|
|
[ANN] TeamRedMiner 0.6.1 - Ethash/Cryptonight/Chukwa Thread Mining (Altcoins)
Good evening. I've made the switch on my AMD rig over to using TeamRedMiner but…
|
n/a | mstrozier | December 17, 2019, 04:00:34 PM |
|
|
|
Official FutureBit Moonlander 2 Driver and Support Thread Mining (Altcoins)
Any fixes for the:Code:[2019-10-31 11:11:59] Started bfgminer 5.4.2-38-g106390aS…
|
n/a | mstrozier | November 10, 2019, 11:27:25 AM |
|
|
|
Official FutureBit Moonlander 2 Driver and Support Thread Mining (Altcoins)
Any fixes for the:Code:[2019-10-31 11:11:59] Started bfgminer 5.4.2-38-g106390aS…
|
n/a | mstrozier | November 08, 2019, 01:01:12 PM |
|
|
|
Official FutureBit Moonlander 2 Driver and Support Thread Mining (Altcoins)
Afternoon all. I have been mining with 2 Moonlander 2's for about a year now an…
|
n/a | mstrozier | October 31, 2019, 10:21:03 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
I cannot go at any freq above setting 5 for voltage without it overheating and l…
|
n/a | mstrozier | October 28, 2019, 11:56:19 PM |
|
|
|
RandomX Benchmarks! https://randomx.monerobenchmarks.info Mining (Altcoins)
Thanks, I'll add the issue to the github. I've tried the two suggestions given,…
|
n/a | mstrozier | October 24, 2019, 09:06:48 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Ok, next question ok USB stats on this board:Code:USB Š Chipset:- 8 x USB 3.0/…
|
n/a | mstrozier | October 24, 2019, 01:51:04 PM |
|
|
|
RandomX Benchmarks! https://randomx.monerobenchmarks.info Mining (Altcoins)
WHEN DOES THIS MINING START!!!!On november 30, details: https://np.reddit.com/r/…
|
n/a | mstrozier | October 24, 2019, 10:10:09 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Looked back through the postings. Margotcoins was using Ubuntu 19.10 and Sam re…
|
n/a | mstrozier | October 24, 2019, 08:28:41 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
I've tried to get either the R606 or my newpacs to run on nicehash but never had…
|
n/a | mstrozier | October 21, 2019, 11:48:58 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Also 2 additional things. It would be best to put your command into a .sh file…
|
n/a | mstrozier | October 13, 2019, 11:24:45 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
My .sh file has this and permissions set to owner:Code:./cgminer -o stratum+tcp:…
|
n/a | mstrozier | September 29, 2019, 03:51:41 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Don't use the 3 b+. You will need the Raspberry Pi 4. But these instruction…
|
n/a | mstrozier | September 20, 2019, 08:55:22 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Hey there,I've been using a Raspberry Pi 3 B+ to run cgminer for a few months no…
|
n/a | mstrozier | September 23, 2019, 09:10:50 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Not sure on the power draw of the LCD screens. I had thought about setting up…
|
n/a | mstrozier | September 22, 2019, 09:05:40 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
I was able to get this working on my Raspberry Pi with 4 newpac's without troubl…
|
n/a | mstrozier | May 09, 2019, 10:44:48 AM |
|
|
|
My Terminus R606 Hardware
I'm thinking it's possibly your app. 60db on up is getting into the normal Asic…
|
n/a | mstrozier | September 18, 2019, 03:13:14 PM |
|
|
|
My Terminus R606 Hardware
Using a phone app as well but android related. I've placed it at the rear of th…
|
n/a | mstrozier | September 18, 2019, 01:05:52 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
If none of the builders are able to assist, then as an alternative you could do…
|
n/a | mstrozier | September 18, 2019, 01:29:28 PM |
|
|
|
My Terminus R606 Hardware
When I check the sound levels on my 2 R606's along with 2 usb fans attached to t…
|
n/a | mstrozier | September 18, 2019, 12:13:45 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
The instructions I wrote up will work on either Pi 3 or Pi 4. If you are usin…
|
n/a | mstrozier | September 17, 2019, 12:36:48 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
You may still run into issues regardless of splitting them out. Laptop hardware…
|
n/a | mstrozier | September 16, 2019, 12:35:25 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Update for Raspberry Pi 4 owners. They have finally released an update for our…
|
n/a | mstrozier | September 13, 2019, 10:27:03 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Sidehack nailed it. If you are using a Windows Machine I would highly suggest…
|
n/a | mstrozier | September 10, 2019, 07:00:30 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
The unit had to be RMA since it was faulty. As Sidehack explained earlier. You…
|
n/a | mstrozier | September 03, 2019, 02:17:58 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
understood and to be clear this is a r606 that I have.what I see as it slowly lo…
|
n/a | mstrozier | September 03, 2019, 01:42:22 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
It very well could be a bad unit possibly damaged due to shipping. I just had o…
|
n/a | mstrozier | September 03, 2019, 11:33:28 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
All 3 lights on is volt setting 7. I noticed the printout that usually comes wi…
|
n/a | mstrozier | August 31, 2019, 09:04:06 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Thanks. Which Buster version, Lite, Buster with Desktop and recommended softwar…
|
n/a | mstrozier | August 28, 2019, 03:26:57 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Since this is on a Raspberry Pi 4 my only suggestion is to reinstall the miner.…
|
n/a | mstrozier | August 28, 2019, 01:23:25 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Yup my thoughts as well. They are still up and running after resetting them las…
|
n/a | mstrozier | August 28, 2019, 08:51:16 AM |
|
|
|
[ANN] CPUchain Core - CPUfinex, CPU mining, Giga block, No premine! Announcements (Altcoins)
Question. On the first page this shows as minable by ARM processors. I have se…
|
n/a | mstrozier | August 29, 2019, 10:21:49 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Update on my Pi4 issue. I may have resolved it, unsure. This morning I inst…
|
n/a | mstrozier | August 27, 2019, 11:59:03 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Ok long term use on the Pi4. An issue has finally popped up and not exactly sur…
|
n/a | mstrozier | August 26, 2019, 10:42:43 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
are you manually setting the mhz. I let it auto tune they both got to 550mhz. T…
|
n/a | mstrozier | August 17, 2019, 07:14:23 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
[...]You can use the same SD card however you will need to reformat it and insta…
|
n/a | mstrozier | August 13, 2019, 03:00:52 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
The miner seem to be acting a bit weird. It is mining fine for a while and then…
|
n/a | mstrozier | August 06, 2019, 09:17:12 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
If you are installing this on a Raspberry Pi, follow the instructions I placed:…
|
n/a | mstrozier | August 05, 2019, 08:23:35 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Evening all. Raspberry Pi 4 kit arrived today and tested both as a NAS and r…
|
n/a | mstrozier | July 30, 2019, 06:40:25 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Hi everyone!Would someone please post what speeds and settings they used to get…
|
n/a | mstrozier | July 27, 2019, 08:54:32 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
hello, I recently purchased a usb miner gekko newpack. The miner works well and…
|
n/a | mstrozier | July 25, 2019, 04:37:54 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Has anyone had the chance to test the r606 and newpacs together on a Raspberry P…
|
n/a | mstrozier | July 23, 2019, 03:09:32 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Thanks @DieselWeaseI and @cliftonk. I have a Odroid XU4 that should be here Thu…
|
n/a | mstrozier | July 15, 2019, 11:03:07 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
I read some posts where some of you were having good luck with Pi 4's.Where are…
|
n/a | mstrozier | July 12, 2019, 11:55:55 AM |
|
|
|
Just jumped in. Installed NewPac. CGminer repeating Stratum from pool detected Hardware
I have tried Nicehash a couple of times and like 419mining said, pretty much won…
|
n/a | mstrozier | July 12, 2019, 12:11:34 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
I agree with gt_addict, we have noticed the pi's have a hard time with excessive…
|
n/a | mstrozier | July 09, 2019, 10:38:02 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Could it be the USB 3.0 hub? I ran into issues when I tried any of my mining ha…
|
n/a | mstrozier | July 05, 2019, 03:25:18 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Also if you are looking for detailed Raspberry Pi instructions I have a set on t…
|
n/a | mstrozier | June 29, 2019, 08:11:34 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
I need help...@Gage-Miner https://bitcointalk.org/index.php?topic=5053833.msg5…
|
n/a | mstrozier | June 24, 2019, 10:00:16 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Yup here is mine. I switched over to Prohashing and have been running steady ov…
|
n/a | mstrozier | June 17, 2019, 09:45:14 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Like the others have stated I haven't had to change my core voltage on the newpa…
|
n/a | mstrozier | June 04, 2019, 09:44:43 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Well today my fans arrived and now have them installed on the back of the R606…
|
n/a | mstrozier | June 03, 2019, 03:50:11 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Are there that many overheating units that everyone is adding extra fans or is t…
|
n/a | mstrozier | May 31, 2019, 11:11:52 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Been looking at different fans to assit with the cooling as well. I currently…
|
n/a | mstrozier | May 31, 2019, 10:36:44 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Awesome, then I'm good One unit will eventually settle down to 675 - 700 aft…
|
n/a | mstrozier | May 28, 2019, 06:30:56 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
@vh I don't run Windows, my data point is Linux (Ubuntu 18.04)@os2sam just anoth…
|
n/a | mstrozier | May 28, 2019, 05:54:41 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Ok with a few others showing the Raspberry Pi having decent results with the R60…
|
n/a | mstrozier | May 26, 2019, 01:51:56 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
yeah since using .exe file assuming it's a windows box.Suggestion, try splitting…
|
n/a | mstrozier | May 25, 2019, 07:49:07 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
I also have a detailed instructions on page 28 of this thread that outlines step…
|
n/a | mstrozier | May 19, 2019, 08:09:55 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
mstrozier,Thanks for your instructions, they got me going with my new RPi today.…
|
n/a | mstrozier | May 18, 2019, 05:55:58 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Ok now wanted to post up what I've collected on power usage on these devices. A…
|
n/a | mstrozier | May 18, 2019, 02:21:54 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Even at V5, it throttles down. I'm betting on the issue being the pi. Autotune d…
|
n/a | mstrozier | May 18, 2019, 12:20:12 PM |
|
|
|
USB miner for Altcoins Mining (Altcoins)
Short answer. Yes and Maybe. Yes to your first answer on USB miners that can…
|
n/a | mstrozier | May 16, 2019, 09:14:34 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
631.25 is where it settled overnight. It would never reach the 750Ghs mark befo…
|
n/a | mstrozier | May 15, 2019, 09:45:44 AM |
|
|
|
Official FutureBit Moonlander 2 Driver and Support Thread Mining (Altcoins)
I had issues when I ran these on usb3 ports. Run's smoothly for me however on…
|
n/a | mstrozier | May 15, 2019, 12:24:02 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
@WilcoWi My understanding is that with autotune, it will detune your freq in o…
|
n/a | mstrozier | May 14, 2019, 10:42:57 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
It is on volt setting 5. I set the freq to 700 and didn't drop much with the au…
|
n/a | mstrozier | May 14, 2019, 09:45:05 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
@vh thanks for working with me yesterday. These changes fixed the shutdown iss…
|
n/a | mstrozier | May 14, 2019, 09:21:18 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
How can I check for that? It's the only device connected to this linux PC. No…
|
n/a | mstrozier | May 13, 2019, 09:58:50 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
I am wondering if it's AB related. When I run this on a non-AB supported pool,…
|
n/a | mstrozier | May 13, 2019, 09:40:30 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Thanks @vh. I'll keep you updated and I am running the current 5/11 build.@vh …
|
n/a | mstrozier | May 13, 2019, 08:48:49 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
https://ibb.co/jW8Ss7R
|
n/a | mstrozier | May 12, 2019, 11:51:07 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Morning all. And just confirming sidehack mining on a pool without ASICBoost en…
|
n/a | mstrozier | May 12, 2019, 07:54:15 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Morning all. And just confirming sidehack mining on a pool without ASICBoost en…
|
n/a | mstrozier | May 11, 2019, 10:40:57 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
I've restarted everything to track for the next 24 hours, as I've had some issue…
|
n/a | mstrozier | May 10, 2019, 07:56:10 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Interesting. That could be it as well then. I have switched it back over to Ka…
|
n/a | mstrozier | May 10, 2019, 10:01:38 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Well I am back with more questions this morning. After my last post, the R606…
|
n/a | mstrozier | May 10, 2019, 09:25:09 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Ok for anyone looking to mine Litecoin Cash (LCC) with a mining pool that suppor…
|
n/a | mstrozier | May 09, 2019, 06:44:20 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Trust VH to catch that detail. I missed from the pictures that it wasn't running…
|
n/a | mstrozier | May 09, 2019, 04:41:35 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Ok I believe the pool where I am mining Litecoin Cash does not fully support AB…
|
n/a | mstrozier | May 09, 2019, 03:37:57 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Autotuning is still a work in progress but the idea follows simple logic...Thank…
|
n/a | mstrozier | May 09, 2019, 02:53:01 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
The [ooooooooo] are the chips. “o” = working chip, not sure what a non-working o…
|
n/a | mstrozier | May 09, 2019, 02:22:31 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Here is an updated screen capture with --widescreen enabled. I tried an earlie…
|
n/a | mstrozier | May 09, 2019, 01:31:22 PM |
Jump to: