| Content | Score | Started by | Date posted | ||
 |
 |
Myrig.com trusted? Mining support
I'd have doubts about trusting them any more.I know Yoshi Goto used to run it, b…
|
n/a | MyRig | June 06, 2021, 07:14:08 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
... Here is a thread in Scam accusations -> Investigations. https://bitcointal…
|
n/a | MyRig | January 07, 2019, 08:16:18 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
Myrig customers were always assisted with any of the issues detected or detected…
|
n/a | MyRig | January 07, 2019, 08:08:06 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
Mr. Scott Offord,Miners you shipped under Halong Mining had large chunk of Hash…
|
n/a | MyRig | January 07, 2019, 07:11:36 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
FreshDesk does not delete ticket upon combined or merge with another duplicate.…
|
n/a | MyRig | January 07, 2019, 06:32:22 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
Mr Scott Offord,Lets cut the lie.Halong Mining Limited in Hong Kong was dissolve…
|
n/a | MyRig | January 07, 2019, 12:31:41 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
art of deceptions did they fulfill all their obligations or, ongoing support a…
|
n/a | MyRig | January 06, 2019, 09:36:55 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
@Steamtyme,You can always try but probably lead you to the wrong path and end up…
|
n/a | MyRig | January 06, 2019, 09:09:19 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
@SteamtymeThank you for the pointer! If a topic is open up for BTCDRAK in inves…
|
n/a | MyRig | January 03, 2019, 08:09:12 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
MyRig nor Yoshi is Halong or BTCDRAK... Myrig customer service does not delete…
|
n/a | MyRig | January 02, 2019, 11:17:10 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
Where did you purchase these?Halong is operated and owned by BTCDRAK. We are ha…
|
n/a | MyRig | December 28, 2018, 11:08:42 PM |
|
|
|
17.2TH/s, 1570W Innosilicon announces the most powerful and efficient BTC Miner Hardware
just a cautionary note. most units would perform at 10-15% higher power consump…
|
n/a | MyRig | November 08, 2018, 11:47:36 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
Don't fall for wrong firmware. It will cost you money to fix your miner if it b…
|
n/a | MyRig | October 25, 2018, 02:05:15 AM |
|
|
|
Antminer R4 - dead hash board? Shitty design, read before you send it back Mining support
Did you try power it off, wait for 30 seconds and power it back on? It may work…
|
n/a | MyRig | February 28, 2017, 05:56:26 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
If you have purchased DragonMint from Myrig, please email [email protected] for…
|
n/a | MyRig | July 03, 2018, 07:42:47 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
Myrig PSU with Myrig Logo on the top of the PSU version are under warranty for t…
|
n/a | MyRig | July 03, 2018, 09:14:14 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
if you are in USA, you might want to send it to us and get it fixed or replaced
|
n/a | MyRig | June 27, 2018, 10:55:03 PM |
|
|
|
DRAGONMINT MYRIG.COM SUPPORT Mining support
If you have purchased DragonMint products via Myrig, we can assist you with the…
|
n/a | MyRig | May 11, 2018, 12:52:25 AM |
|
|
|
MYRIG SUPPORT Mining support
ReservedDragonMintIf you are experiencing the lower hash rate out of the box, pl…
|
n/a | MyRig | May 11, 2018, 12:54:01 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
@NotFuzzyWarmYes, I know your point. May be some explanations to come later but…
|
n/a | MyRig | June 20, 2018, 04:25:58 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
@NotFuzzyWarmMyrig provided sample DragonMint miners to CKPOOL and KANO.IS (Ship…
|
n/a | MyRig | June 15, 2018, 10:58:14 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
Lets just wait for Kano to get it all ready! At the end of the day, he has 200+…
|
n/a | MyRig | June 13, 2018, 04:39:21 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
IF PSU was a part of DragonMint purchase and came with Halong's stamp on the com…
|
n/a | MyRig | May 31, 2018, 04:29:30 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
To be fair, while Dragonmint will be unhappy with me saying this, if it doesn't…
|
n/a | MyRig | May 25, 2018, 12:10:56 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
For T1, if hash PCB is unstable, please try, original firmware it came with, the…
|
n/a | MyRig | May 19, 2018, 02:35:43 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
Return shipping to service center is on customers per the HalongMining purchase…
|
n/a | MyRig | May 17, 2018, 10:40:45 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
DragonMint Update:Preparing for a bit more timely exchange process to include cu…
|
n/a | MyRig | May 12, 2018, 06:35:42 PM |
|
|
|
MYRIG SUPPORT Mining support
Reserved (contents be added more)AntminersCurrently Paid Repair is available fo…
|
n/a | MyRig | May 11, 2018, 12:52:37 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
ATTN: HalongMining.com CustomersOnce again, Myrig will be providing the substitu…
|
n/a | MyRig | May 12, 2018, 09:01:02 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
GOOD IDEA!@MyRigYou may want to consider starting a Thread in the Mining Support…
|
n/a | MyRig | May 11, 2018, 12:48:02 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
@combyNeed warranty claim? or repair? please email [email protected] with your…
|
n/a | MyRig | May 11, 2018, 12:11:23 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
Please email [email protected] also with your Myrig or Halong order number. Ba…
|
n/a | MyRig | May 07, 2018, 05:25:49 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
@vinclinformation from Halong is very limited and best we can do is provide them…
|
n/a | MyRig | May 07, 2018, 09:54:17 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
@frankenmintYou may want to contact Halong Mining for your item partially not be…
|
n/a | MyRig | May 06, 2018, 02:53:07 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
For Halong Mining's DragonMint T1 customers to expedite warranty validation proc…
|
n/a | MyRig | May 06, 2018, 09:02:17 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
Honestly speaking, buying from Halongmining was the worst mistake I have ever ma…
|
n/a | MyRig | May 05, 2018, 01:22:19 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
We try to reply as many as we can... if we missed, please reply to the same emai…
|
n/a | MyRig | May 04, 2018, 01:46:14 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
If you are in USA, and you are the original buyer of this T1 from HalongMining.c…
|
n/a | MyRig | May 03, 2018, 12:52:07 PM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
What is your country? received 2x T1, one has a broken hashboard (not recognize…
|
n/a | MyRig | May 04, 2018, 04:37:56 AM |
|
|
|
DragonMint T1 16TH/S halongmining.com Hardware
April 27 UpdateWas told by the warehouse, 1280 units of T1 was receive for shipp…
|
n/a | MyRig | April 27, 2018, 07:31:05 PM |
|
|
|
DragonMint 16TH/S halongmining.com Hardware
Nice to see myrig looking out for customers Sadly, original photo was censored e…
|
n/a | MyRig | April 24, 2018, 11:38:38 PM |
|
|
|
DragonMint 16TH/S halongmining.com Hardware
April 24 Update.No T1 delivered from Halong Mining Limited as of today. Halong…
|
n/a | MyRig | April 24, 2018, 05:11:36 AM |
|
|
|
DragonMint 16TH/S halongmining.com Hardware
REPOST from other post...PSA: If DragonMint T1 having problem with the hash PCB,…
|
n/a | MyRig | April 23, 2018, 10:43:09 AM |
|
|
|
DragonMint 16TH/S halongmining.com Hardware
B29 and B52 and T1 are shipping, however, Holiday was in the way that caused a f…
|
n/a | MyRig | April 03, 2018, 01:40:19 PM |
|
|
|
DragonMint 16TH/S halongmining.com Hardware
Thank you CK! Yes, it will be released under GPL request, however, it is still…
|
n/a | MyRig | March 21, 2018, 01:00:55 AM |
|
|
|
DragonMint 16TH/S halongmining.com Hardware
More News coming once all necessary steps are taken! Stay tuned and Happy Hashi…
|
n/a | MyRig | March 07, 2018, 09:41:50 AM |
|
|
|
ANTMINER S7/S9 Boards - Who repairs them !!! Surely someone does ??? Service Discussion
If we charged you 2x on the same hash PCB, please let us know the Order Number (…
|
n/a | MyRig | January 14, 2018, 01:14:12 PM |
|
|
|
Problem with antminer s7 Mining support
It is overclocked. more than likely your ASIC chips and PCB are damaged. Not m…
|
n/a | MyRig | May 24, 2017, 10:42:14 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
unfortunately there is fit for all answer. T9 and S9 there are pro and cons and…
|
n/a | MyRig | May 24, 2017, 10:35:57 PM |
|
|
|
S7 miner one board hotter than the others, why? Hardware
There is no thermal paste in S7....The thermal paste can go bad too,check that l…
|
n/a | MyRig | May 24, 2017, 10:32:24 PM |
|
|
|
S7 miner one board hotter than the others, why? Hardware
if you see heavy dust, probably that be the cause.replacement wise, depends on w…
|
n/a | MyRig | May 24, 2017, 07:38:36 PM |
|
|
|
S7 miner one board hotter than the others, why? Hardware
possibility that S5 is influencing the higher temperature but to rule that out,…
|
n/a | MyRig | May 24, 2017, 04:54:53 PM |
|
|
|
R4 dead hashboard (again) Service Discussion
@Boomin1BitmainWarranty is now MyRig.com It is in a transition stage and it is…
|
n/a | MyRig | May 22, 2017, 08:37:34 PM |
|
|
|
First mining rig qestion Mining (Altcoins)
You might want to post this question else where as this is BTC side of the forum…
|
n/a | MyRig | May 22, 2017, 03:11:41 PM |
|
|
|
110V power supply for Antminer S9? Hardware
Safe approach at the moment be EVGA1600 it is $399 or so price and it is expensi…
|
n/a | MyRig | May 22, 2017, 02:59:25 PM |
|
|
|
S9 lowest rpm & temps Mining support
You have a nice setup and stats looks good.100W saving... since you are using t…
|
n/a | MyRig | May 20, 2017, 01:22:16 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
PREMIUM!...If you break the hash PCB from own firmware version, we will be happy…
|
n/a | MyRig | May 20, 2017, 01:13:33 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
@numnutz2009 & @ComputerGenieOuch Ouch Ouch! lets not be like Core vs BU fight.…
|
n/a | MyRig | May 19, 2017, 04:11:36 PM |
|
|
|
R4 running at half speed, chip status looks strange. Mining support
Thank you for the suggestions. We will try our best to reach that point in serv…
|
n/a | MyRig | May 18, 2017, 09:45:54 PM |
|
|
|
mining hardware in a rented rack in a datacenter ? Service Discussion
traditional data center, please check with them first! power consumption availa…
|
n/a | MyRig | May 18, 2017, 05:03:18 PM |
|
|
|
R4 running at half speed, chip status looks strange. Mining support
@NotFuzzyWarmthe comp hashing needs, that system be a different account and requ…
|
n/a | MyRig | May 18, 2017, 04:53:29 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
It sounds like Control PCB but usually the hash PCB is the damaged one tho. Do…
|
n/a | MyRig | May 18, 2017, 12:05:37 PM |
|
|
|
R4 running at half speed, chip status looks strange. Mining support
@philipma1957You can send in just the bad hash PCB if other is working, or you c…
|
n/a | MyRig | May 18, 2017, 11:52:31 AM |
|
|
|
R4 running at half speed, chip status looks strange. Mining support
We now offer comp mining while unit is in paid repair. If it is not fixable, we…
|
n/a | MyRig | May 15, 2017, 02:38:23 PM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
@VRobb,as always, our hosting option, you do not have to worry about dead units…
|
n/a | MyRig | April 20, 2017, 05:55:14 AM |
|
|
|
S9 Miners refuse to start - were working fine. Mining support
please try powr them off, wait for 1-2 minutes, then power them back on again. …
|
n/a | MyRig | April 14, 2017, 09:04:02 AM |
|
|
|
Antminer S9 - Won't upgrade to new firmware - Any ideas on what to try? Hardware
Are you on USA/Canada/Japan and any other countries that use 100-125v with antmi…
|
n/a | MyRig | April 12, 2017, 07:13:15 AM |
|
|
|
S9 Hash Card Out Of Warranty Repair From UK Hardware
Sounds like we can service you out of Iceland. That be closer and cheaper than…
|
n/a | MyRig | April 03, 2017, 09:13:32 AM |
|
|
|
Need help! Hardware
Need help! by MyRig
Are you operating this with PSU with 100-110v? if so, depends on your PSU's per…
|
n/a | MyRig | March 31, 2017, 09:23:25 AM |
|
|
|
"Lucky Drawing (Repair Ticket) $50 Refund" from Bitmain Warranty? :) Hardware
ETH rise is good!!!
|
n/a | MyRig | March 17, 2017, 11:56:15 PM |
|
|
|
Configure Antminer S7 on a different network? Mining support
Easiest way be, configure it to the mining pool you'd like to use at home and ma…
|
n/a | MyRig | February 28, 2017, 05:14:59 AM |
|
|
|
Best hosting location for mining gear Hardware
We also have fully managed hosting service flat rate at $57/kw (Same Price for 1…
|
n/a | MyRig | February 22, 2017, 11:14:43 PM |
|
|
|
Antminer S7 is mining but not showing up on the pool Hardware
Power it off and Power it back on may be? hope that will solve the problem!I no…
|
n/a | MyRig | February 09, 2017, 02:28:30 PM |
|
|
|
Antminer R4 Problems. dead hash boards. Hardware
@boomin,If your shipping fee is going to cost $65 to Colorado, USA, please email…
|
n/a | MyRig | February 04, 2017, 08:28:19 PM |
|
|
|
Antminer R4 - dead hash board? Shitty design, read before you send it back Mining support
@captinkid,Denver turn around time does not take that long. If you are waiting…
|
n/a | MyRig | February 03, 2017, 10:30:23 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
@philipma1957.....phil, phil, phil.....now days, fan is serial numbered as well…
|
n/a | MyRig | January 28, 2017, 11:29:32 AM |
|
|
|
Have to send Antminer S9 away for warranty work... Hardware
If your shipping cost is more than $25 to send the whole unit of S9 or T9 or R4,…
|
n/a | MyRig | January 26, 2017, 02:39:24 PM |
|
|
|
Low hash rate with S9 bath13, Boards apear to be fine Mining support
You may want to use 1 PSU to power on your S9! that may help a bit of reducing…
|
n/a | MyRig | January 23, 2017, 10:54:59 PM |
|
|
|
S9, no matter what frequency I still get XXXXXs Hardware
May be to physically power it off, wait for about 30 seconds and power it back o…
|
n/a | MyRig | January 23, 2017, 10:45:51 PM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
@elokk,Please check the reported tracking number. Techs will manually handle yo…
|
n/a | MyRig | January 23, 2017, 10:26:25 PM |
|
|
|
Antminer R4 - Wrong chip index Hardware
Hash PCB is probably damaged. Any mod or self attempt repair may result in warr…
|
n/a | MyRig | January 20, 2017, 02:39:08 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
Amazon is more strict than Ebay. Amazon uses customer is always right approach.…
|
n/a | MyRig | January 14, 2017, 10:02:03 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
Repair cost is different on each case due to what is broken. If you busted the…
|
n/a | MyRig | December 25, 2016, 04:00:35 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
if it was sent to BitmainWarranty.com in USA, Russia, and Ukraine, 30 days of wo…
|
n/a | MyRig | December 04, 2016, 04:40:50 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
for those of you wandering if this is the auto tune version. This pic seems to…
|
n/a | MyRig | November 23, 2016, 05:30:26 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
Solar panel can be used as long as it can supply you steady 1600W range to be pl…
|
n/a | MyRig | November 23, 2016, 05:27:21 AM |
|
|
|
My antminer S1 doesn't start mining Mining support
Problem is S1 is not able to communicate to NTPD server. Please check your netw…
|
n/a | MyRig | November 21, 2016, 08:04:04 PM |
|
|
|
Need Antminer S9-B10 original firmware (july 11) new FW doesnt work Mining support
If you are getting connection refused error, that mean, the hash PCB is still in…
|
n/a | MyRig | November 21, 2016, 08:01:21 PM |
|
|
|
Recovering Coins Pools
Please message eleuthria and he be the best person to answer this for you! …
|
n/a | MyRig | November 21, 2016, 01:19:40 AM |
|
|
|
NiceHash multi-algorithm SOLO mining pool [BTC/LTC/DASH blocks found!] Pools (Altcoins)
sorry, the bottom portion was cut off.... Found Block stats probably came from…
|
n/a | MyRig | November 21, 2016, 01:15:27 AM |
|
|
|
NiceHash multi-algorithm SOLO mining pool [BTC/LTC/DASH blocks found!] Pools (Altcoins)
45 chips model frequency should be 700M not 600m lower the frequency, lower the…
|
n/a | MyRig | November 20, 2016, 09:41:11 PM |
|
|
|
Can't login to Antminer s9's. Mining support
were you able to login?
|
n/a | MyRig | November 20, 2016, 01:14:31 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
If you can ship it cheaper to Ukraine in a very good protected packaging. (5-6…
|
n/a | MyRig | November 16, 2016, 09:20:53 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
Chain 2 wise, it is not missing, data port you are connected to is 1 3 and 4hash…
|
n/a | MyRig | November 16, 2016, 09:14:13 PM |
|
|
|
What is the difference between antminer S9 and between antminer S9+ Hardware
SCAM!!! BE CAREFUL!!What is the difference between antminer S9 and between antm…
|
n/a | MyRig | November 12, 2016, 04:13:18 PM |
|
|
|
Bitmain Antminer Product Assistance Mining support
Reserved
|
n/a | MyRig | November 11, 2016, 12:47:23 AM |
|
|
|
Bitmain Antminer Product Assistance Mining support
Need Assistance in Bitmain Antminer Product, feel free to post your problem here…
|
n/a | MyRig | November 11, 2016, 12:47:09 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
USA, Russia, Ukraine, Iceland and other limited service location are primary rep…
|
n/a | MyRig | November 10, 2016, 11:50:38 PM |
|
|
|
Be careful: BITMAIN ANTMINERS have NO WARRANTY and after-sales customer service Hardware
Just a thought.It caught on my eye. You said you have to comp your customers. …
|
n/a | MyRig | November 02, 2016, 04:29:51 PM |
|
|
|
My warranty adventure with my s-9. Hardware
30 days of workmanship is provided, or remainder of the original warranty term o…
|
n/a | MyRig | October 31, 2016, 04:43:08 PM |
Jump to: