| Content | Score | Started by | Date posted | ||
 |
 |
BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB, HFA Mining software (miners)
hi lukeI have been running debug on bfgminer with nf2 and it is still hashing it…
|
n/a | pauljbl | May 22, 2014, 05:02:39 PM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.3.3 Mining software (miners)
Hi I see there is support for nf2 and nf6 could you add support for nanofurys de…
|
n/a | pauljbl | May 18, 2014, 10:56:59 AM |
|
|
|
NanoFury Project - Open Source Design Hardware
I've added support for NF2 and NF6 into cgminer git master branch. I'm not getti…
|
n/a | pauljbl | May 17, 2014, 04:14:19 PM |
|
|
|
BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB, HFA Mining software (miners)
Luke is there a bug with bfgminer 3.99.0 as using nf2 on this and when I get a d…
|
n/a | pauljbl | May 04, 2014, 06:27:57 PM |
|
|
|
GridSeed 5-chip USB miner voltage mod Mining (Altcoins)
Santor I dont quite get the syntax on the settings for freq--freq=850 --gc3355-f…
|
n/a | pauljbl | April 25, 2014, 05:19:26 PM |
|
|
|
GridSeed 5-chip USB miner voltage mod Mining (Altcoins)
On Sandor's cpuminer fork what is the command to set the individual freq of the…
|
n/a | pauljbl | April 25, 2014, 07:08:48 AM |
|
|
|
BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB, HFA Mining software (miners)
Anyone having problem with gridseed on nwools fork bfgminer it works great but a…
|
n/a | pauljbl | April 14, 2014, 03:46:43 PM |
|
|
|
BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB, HFA Mining software (miners)
Nwools and Luke have you ever tried 15 Nanofurys on Linux as wondering if the dr…
|
n/a | pauljbl | April 04, 2014, 03:58:44 PM |
|
|
|
BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB, HFA Mining software (miners)
HiCan anyone help I have debian on my laptop with bfgminer 3.10.0 compiled and h…
|
n/a | pauljbl | April 03, 2014, 12:17:49 PM |
|
|
|
NanoFury Project - Open Source Design Hardware
Has anyone managed to get more than 10 nf1 running on a beaglebone black. It doe…
|
n/a | pauljbl | April 01, 2014, 06:05:07 PM |
|
|
|
LightningAsic usb miners based Gridseed GC3355 Tech Support Thread Hardware
Anyone know if the wiibox firmware works on theses controllers?
|
n/a | pauljbl | March 02, 2014, 04:47:14 PM |
|
|
|
LightningAsic usb miners based Gridseed GC3355 Tech Support Thread Hardware
whats the best freq you find for the miners
|
n/a | pauljbl | February 28, 2014, 01:16:56 PM |
|
|
|
SCRYPT ASIC miner ready. BTC+LTC ASIC miner, 1THS(1000GHS) Bitcoin miner, 950W. Hardware
Hi.jack did any la5u go out today. I paid on the 17thThanksPaul
|
n/a | pauljbl | February 24, 2014, 07:49:47 PM |
|
|
|
[Closed] Bitfury Bare Chips ~2.6 Gh/s - 3 reels Group buys
Have paid postage if you can update the opThanks
|
n/a | pauljbl | February 18, 2014, 08:37:05 AM |
|
|
|
[Closed] Bitfury Bare Chips ~2.6 Gh/s - 3 reels Group buys
Hi I need to pay you the postage I have sent you a pm
|
n/a | pauljbl | February 13, 2014, 11:31:43 AM |
|
|
|
[GATHER INTEREST] [UK + EU] DualMiner Group buys
I'd be interested in a 5 chip version.
|
n/a | pauljbl | February 02, 2014, 04:44:15 PM |
|
|
|
[Open] Bitfury Bare Chips ~2.6 Gh/s - Reel #3 (461:3,000 Remaining) Group buys
payment sent for another 8 chips to add to my order on reel 3trans id cbd9b8bf0…
|
n/a | pauljbl | January 17, 2014, 06:56:28 PM |
|
|
|
[Open] Bitfury Bare Chips ~2.6 Gh/s - Reel #3 (756:3,000 Remaining) Group buys
payment sent for another 7 chipstrans id 74e5618bd99c17dcbe9df33a5786d811751b08…
|
n/a | pauljbl | January 15, 2014, 05:33:34 PM |
|
|
|
[Open] Bitfury Bare Chips ~2.6 Gh/s - Reel #3 (1,268:3,000 Remaining) Group buys
HiWondered if reel 3 had gone through
|
n/a | pauljbl | January 13, 2014, 08:44:32 PM |
|
|
|
DRILLBIT SYSTEM Miners - Thumbs (Temp NA), 8 Boards (0 left) Group buys
HiCan anyone approve me on the drill bit forums pleaseThankyouPaul
|
n/a | pauljbl | January 13, 2014, 09:02:41 AM |
|
|
|
[Open] Bitfury Bare Chips ~2.6 Gh/s - Reel #3 (1,284:3,000 Remaining) Group buys
Hi can you add my 16 chips to reel 3 think you might have forgot
|
n/a | pauljbl | January 11, 2014, 04:38:02 PM |
|
|
|
[Open] Bitfury Bare Chips ~2.6 Gh/s - Reel #3 (1,500:3,000 Remaining) Group buys
Payment sent for 16 chips same address as my order on reel 2trans id 4a3c6039e5c…
|
n/a | pauljbl | January 11, 2014, 01:25:43 PM |
|
|
|
NanoFury Project - Open Source Design Hardware
I seethe holes that are under the bitfury chip is there solder coming throught t…
|
n/a | pauljbl | January 07, 2014, 04:36:21 PM |
|
|
|
[Open] Bitfury Bare Chips ~2.6 Gh/s - Reel #2 - 1 day remaining Group buys
hihave sent payment for 5 more chips if you can add to my order to make a total…
|
n/a | pauljbl | January 07, 2014, 10:14:15 AM |
|
|
|
[Checking interest] QikFury blank boards + Bitfury chips + Vregulator group buy Group buys
Would one of theses boards need anything else to connect to pc. Do they have USB…
|
n/a | pauljbl | January 07, 2014, 07:53:04 AM |
|
|
|
[Open] Bitfury Bare Chips ~2.6 Gh/s - Reel #2 (2750:3000 Remaining) Group buys
have paid for 11 chipstrans id 3fd365ddd6a1cb0a2736b52fcbbe8401f70adcb3d5e39909e…
|
n/a | pauljbl | January 05, 2014, 05:28:55 PM |
|
|
|
[Open] Bitfury Bare Chips ~2.6 Gh/s - Reel #2 (2750:3000 Remaining) Group buys
HiCan you reserve me 11 chips please my transfers are being slow
|
n/a | pauljbl | January 05, 2014, 04:39:51 PM |
|
|
|
[Open] Bitfury Bare Chips ~2.6 Gh/s - Reel #2 (2750:3000 Remaining) Group buys
Is it the new reduced price we pay
|
n/a | pauljbl | January 05, 2014, 04:04:51 PM |
|
|
|
[Open] Bitfury Bare Chips ~2.6 Gh/s - Reel #2 (2750:3000 Remaining) Group buys
HiI am ready to pay for some chips can I send payment to you yet
|
n/a | pauljbl | January 05, 2014, 02:20:51 PM |
|
|
|
NanoFury Project - Open Source Design Hardware
I seethe holes that are under the bitfury chip is there solder coming throught t…
|
n/a | pauljbl | January 05, 2014, 01:53:28 PM |
|
|
|
NanoFury Project - Open Source Design Hardware
on v0.7 how do you choose the footprint for the MCP2210 I/SO or I/SS when making…
|
n/a | pauljbl | January 05, 2014, 12:16:12 PM |
|
|
|
Bitmain AntMiner U1 Tips & Tricks Mining support
does anyone know what a safe overclock is on theses and do they need extra cooli…
|
n/a | pauljbl | January 04, 2014, 03:47:41 PM |
|
|
|
[Open] Bitfury Bare Chips ~2.6 Gh/s - [Discussion] Bumping Service and DIY Kits Group buys
HiCan you put me down for 16 chips pleaseThankyou
|
n/a | pauljbl | January 04, 2014, 01:52:23 AM |
|
|
|
- One String - a novel bitfury miner design - Hardware
HiAre you able to make me this miner if I get the chipsCheers
|
n/a | pauljbl | January 03, 2014, 06:59:59 PM |
|
|
|
[Open] Bitfury Bare Chips ~2.6 Gh/s - Gathering Interest Group buys
Hi sent you a pmWould also be interested in 16 bit fury chips all on one boardCh…
|
n/a | pauljbl | January 03, 2014, 06:53:46 PM |
|
|
|
[Open] Bitfury Bare Chips ~2.6 Gh/s - Gathering Interest Group buys
i have been looking for diy kits as thinking of buying some chips if anyone know…
|
n/a | pauljbl | January 03, 2014, 08:39:51 AM |
|
|
|
DRILLBIT SYSTEM Miners - Thumbs (Temp NA), 8 Boards (0 left) Group buys
hiwill the 8 drillbit boards be still on sale
|
n/a | pauljbl | December 29, 2013, 11:06:45 AM |
|
|
|
[GIVEAWAY] 50.000 DOGE (500x100) for mining on http://doge.cryptovalley.com Altcoin Discussion
user name pauljblDCyz35VZUW38mJo3mjVqEetNyfBGPQve7V
|
n/a | pauljbl | December 16, 2013, 04:42:19 AM |
|
|
|
doge gpu mining Altcoin Discussion
hiI am a newbie here but done mining before. a 7970 is a good card to get. you…
|
n/a | pauljbl | December 15, 2013, 06:17:30 PM |
Pages:
Jump to: