| Content | Score | Started by | Date posted | ||
 |
 |
Running Miner off of Deep cycle batteries - expected drain? Mining support
I'm running 10kW of mining gear and ~5kW of grid tied solar. Solar supplies abou…
|
n/a | SamHa1n | April 15, 2016, 06:55:17 AM |
|
|
|
Running Miner off of Deep cycle batteries - expected drain? Mining support
I'm running 10kW of mining gear and ~5kW of grid tied solar. Solar supplies abou…
|
n/a | SamHa1n | April 12, 2016, 07:36:14 AM |
|
|
|
Antminer S5 in a hot Texas garage? Hardware
High heat, high humidity... fun times were had, but it worked.
|
n/a | SamHa1n | March 01, 2016, 08:36:24 AM |
|
|
|
Antminer S5 in a hot Texas garage? Hardware
I ran a dozen S5's mounted to exhaust out of window inside a shed, the other win…
|
n/a | SamHa1n | February 24, 2016, 07:43:10 AM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
one of s7 freezes after about an hour powered on - I am trying to deduce what or…
|
n/a | SamHa1n | February 16, 2016, 08:53:32 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
My S5 wanna be S7 113 asic....... so much wrong with that pic. #3 fan is out,…
|
n/a | SamHa1n | December 15, 2015, 08:07:44 AM |
|
|
|
Antminer S7 performance Hardware
Had 2 of 4 units show up that perform slow and can't seem to run any faster than…
|
n/a | SamHa1n | October 07, 2015, 06:52:53 AM |
|
|
|
Modifying a USB hub for extra power and "I did it!" showoff thread Hardware
I had good luck modding cheapest hubs I could find at the time. Shelf board with…
|
n/a | SamHa1n | September 20, 2015, 10:18:46 AM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
Thanks for the info!
|
n/a | SamHa1n | August 30, 2015, 11:43:51 AM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
I have same problem on two separate orders placed earlier today. Both are confir…
|
n/a | SamHa1n | August 30, 2015, 11:33:14 AM |
|
|
|
Which USB hub to use with Block Erupters | NanoFury NF1 | BPMC Red Fury? A List. Hardware
I have several lightly used 10A 5VDC DIN mount power supplies I would like to ge…
|
n/a | SamHa1n | September 21, 2013, 08:19:36 AM |
|
|
|
Which USB hub to use with Block Erupters | NanoFury NF1 | BPMC Red Fury? A List. Hardware
I have several lightly used 10A 5VDC DIN mount power supplies I would like to ge…
|
n/a | SamHa1n | September 19, 2013, 09:12:05 AM |
|
|
|
Which USB hub to use with Block Erupters or K1? A List. Hardware
pic with new 90 amp power supplies, brought price per port to less than $2
|
n/a | SamHa1n | August 09, 2013, 10:51:00 AM |
|
|
|
Which USB hub to use with Block Erupters or K1? A List. Hardware
Great point about the red wire and back feeding power to hubs if one psu goes do…
|
n/a | SamHa1n | August 08, 2013, 08:13:57 AM |
|
|
|
Which USB hub to use with Block Erupters or K1? A List. Hardware
I'm running hundreds of them, for weeks now, with cheapest hubs I could find on…
|
n/a | SamHa1n | August 07, 2013, 09:19:30 AM |
|
|
|
bad Block Erupter? Hardware
I'm not buying it. Sealed after testing at the production facility and sold wit…
|
n/a | SamHa1n | July 31, 2013, 07:11:30 AM |
|
|
|
Best USB hub for Block Erupters + Raspberry Pi? Hardware
The barrel plug seems to be the weak link in getting sufficient power to the por…
|
n/a | SamHa1n | July 27, 2013, 07:19:22 AM |
|
|
|
Best USB hub for Block Erupters + Raspberry Pi? Hardware
The barrel plug seems to be the weak link in getting sufficient power to the por…
|
n/a | SamHa1n | July 26, 2013, 12:03:22 PM |
|
|
|
Best USB hub for Block Erupters + Raspberry Pi? Hardware
19 eruptors on 2 lightly modified
|
n/a | SamHa1n | July 26, 2013, 09:48:12 AM |
|
|
|
PiMiner - DIY mining controller/monitor with Raspberry Pi [v1.1] Hardware
I like pi! half finished.http://imgur.com/BiIMKJbHave had 80+ on a single pi.
|
n/a | SamHa1n | July 22, 2013, 10:40:46 PM |
|
|
|
[Block Erupter USB] In-Stock ASIC - 336 Mhash - Ready to Ship within USA!! Group buys
Ordered a bunch yesterday, received a bunch today, mining with a bunch right now…
|
n/a | SamHa1n | June 13, 2013, 05:00:08 PM |
|
|
|
Running Singles without outer case Off-topic
Go one step further. After removing it entirely from its fancy thermally gimped…
|
n/a | SamHa1n | August 14, 2012, 10:58:59 AM |
|
|
|
Circle of Trust [Game/experiment] Games and rounds
I didn't like that part, so I ignored it. The rest, yeah, kinda cool.
|
n/a | SamHa1n | July 12, 2012, 09:18:43 PM |
|
|
|
Circle of Trust [Game/experiment] Games and rounds
1C6AfdAvo8dETR2QmhcEgXog7zXgdstheU
|
n/a | SamHa1n | July 12, 2012, 09:04:50 PM |
|
|
|
Subforum naming FAIL CPU/GPU Bitcoin mining hardware
agree on the naming fail.. shortbus style
|
n/a | SamHa1n | July 08, 2012, 08:38:53 AM |
|
|
|
Are all of the BFL power bricks complete shit? Off-topic
I have these things spread out EVERYWHERE......They are not consolodated. I thi…
|
n/a | SamHa1n | July 06, 2012, 09:21:30 AM |
|
|
|
Are all of the BFL power bricks complete shit? Off-topic
If you have more than 1 fpga board that are 12V fed...you need to get a modular…
|
n/a | SamHa1n | July 06, 2012, 08:52:56 AM |
|
|
|
X6500 Custom FPGA Miner Hardware
Thanks for your reply. So any clue what is wrong in my case? Thanks in advanceIf…
|
n/a | SamHa1n | July 06, 2012, 08:36:28 AM |
|
|
|
notice a lot of asic vaporware spam in an FPGA sub forum... Off-topic
No troll, just an observation and a simple question. Currently, asic topics have…
|
n/a | SamHa1n | June 20, 2012, 08:11:29 AM |
|
|
|
notice a lot of asic vaporware spam in an FPGA sub forum... Off-topic
Is there not a fantasy sub forum somewhere better suited for this? You can ponde…
|
n/a | SamHa1n | June 20, 2012, 07:45:24 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
Is this already Eldentyrell's bitstream???No, it is running ztex_ufm1_15y1 bitst…
|
n/a | SamHa1n | June 14, 2012, 07:05:23 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
Is this already Eldentyrell's bitstream???No, it is running ztex_ufm1_15y1 bitst…
|
n/a | SamHa1n | June 13, 2012, 11:47:19 PM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
Code:001-0: ztex_ufm1_15y1-04A36DF26A-1: f=232.00MHz, errorRate=0.23%, maxErro…
|
n/a | SamHa1n | June 13, 2012, 09:57:23 PM |
|
|
|
Algorithmically placed FPGA miner: 245MH/s/chip and still rising Hardware
You mine **% faster only to kill your equipment **% sooner?
|
n/a | SamHa1n | June 10, 2012, 10:37:28 PM |
|
|
|
Post Your Mining Rig Efficiency CPU/GPU Bitcoin mining hardware
370 Watts @ ~5.2Gh/s = FPGA4TW!
|
n/a | SamHa1n | June 07, 2012, 07:28:17 PM |
|
|
|
FPGA Rig Photos Hardware
I used hard drive mounting plates because they slide right out of case giving in…
|
n/a | SamHa1n | June 05, 2012, 05:48:50 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 210 MH/s FPGA Board Hardware
if you collect enough condensation points, you get to bonus round.
|
n/a | SamHa1n | April 19, 2012, 03:20:37 PM |
|
|
|
Starting a (small) FPGA mining farm Hardware
ordered single on the 9th of January...still waiting...any month now...
|
n/a | SamHa1n | April 18, 2012, 09:34:46 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 210 MH/s FPGA Board Hardware
Has size been increased? Noticed the addition of -1 to the end of device listin…
|
n/a | SamHa1n | April 18, 2012, 09:27:28 AM |
|
|
|
FPGA Rig Photos Hardware |
n/a | SamHa1n | April 16, 2012, 11:14:53 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 210 MH/s FPGA Board Hardware
What I have noticed using 10 board vertical stacking is that a thermal stratific…
|
n/a | SamHa1n | March 20, 2012, 11:28:18 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 210 MH/s FPGA Board Hardware
HDD mounting plates ? Nice idea Indeed! Very elegant idea. I'd like to try it wi…
|
n/a | SamHa1n | March 10, 2012, 03:25:17 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 210 MH/s FPGA Board Hardware |
n/a | SamHa1n | March 07, 2012, 12:31:39 PM |
|
|
|
X6500 Custom FPGA Miner Hardware
Heatsink/fans are 40mm xilence that originally came stock on ztex fpga boards. H…
|
n/a | SamHa1n | March 01, 2012, 07:35:21 AM |
|
|
|
X6500 Custom FPGA Miner Hardware |
n/a | SamHa1n | February 27, 2012, 04:28:35 PM |
|
|
|
X6500 Custom FPGA Miner Hardware
Board is way too hot. I think i'll stick with the 166 bitstream for now. I was h…
|
n/a | SamHa1n | January 18, 2012, 06:23:06 PM |
|
|
|
X6500 Custom FPGA Miner Hardware
found it. thanks. maybe a more prominent placement for the github link on fpgami…
|
n/a | SamHa1n | January 18, 2012, 02:30:06 AM |
|
|
|
X6500 Custom FPGA Miner Hardware
Thank you for the suggestion.i looked that division/0 up and i guess you are not…
|
n/a | SamHa1n | January 18, 2012, 02:15:15 AM |
|
|
|
X6500 Custom FPGA Miner Hardware
Any clue why I get these errors? It's on vista.
|
n/a | SamHa1n | January 18, 2012, 01:35:09 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
I added higher risers and spaced them apart from each other by a couple of inche…
|
n/a | SamHa1n | January 03, 2012, 04:15:39 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
going to strip them down and use a paste this time. Been on the lookout for good…
|
n/a | SamHa1n | January 03, 2012, 11:34:37 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
Received two boards I purchased last week. Been running them both all weekend. t…
|
n/a | SamHa1n | January 02, 2012, 07:09:54 PM |
|
|
|
Whitelist Requests (Want out of here?) Beginners & Help
Really would love to be whitelisted in order to post my personal feedback and ex…
|
n/a | SamHa1n | January 02, 2012, 01:28:20 PM |
Pages:
Jump to: