| Content | Score | Started by | Date posted | ||
 |
 |
ANTMINER C1 Discussion and Support Thread Hardware
@tbolt Looking at your results I feel the Core voltage must be changing as I can…
|
n/a | tbolt | July 28, 2015, 11:10:33 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I have not measured the core voltage directly with a DVM.Are you sure you are lo…
|
n/a | tbolt | July 27, 2015, 06:17:39 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
The C1 hashing boards are S3 family boards.So, yes - they are capable of changin…
|
n/a | tbolt | July 27, 2015, 04:27:14 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Hopefully the image showed you the fried chips :/(main chip in middle with a sta…
|
n/a | tbolt | July 10, 2015, 04:28:00 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
You said:Falling hashrate problem with a C1. It has been running at intentional…
|
n/a | tbolt | May 06, 2015, 11:03:42 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Batch 4?C2 (with the higher density chips) ?
|
n/a | tbolt | April 29, 2015, 05:52:59 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
The large tank pump has arrived from China but the other two pumps have been mov…
|
n/a | tbolt | April 20, 2015, 05:11:50 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
The large tank pump has arrived from China but the other two pumps have been mov…
|
n/a | tbolt | April 20, 2015, 04:22:38 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I tested underclocking-volting the C1.The best setting was suggested by another…
|
n/a | tbolt | April 06, 2015, 04:48:49 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Getting my first C1 later this week with a new and dry cooling kit. What's the b…
|
n/a | tbolt | March 31, 2015, 03:37:46 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Seeing the C1 may be out of fashion, anyone have any unused, valid C1 vouchers f…
|
n/a | tbolt | March 30, 2015, 11:11:03 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
hii got problem with one unit.one of boards is dropping after few hours of hashi…
|
n/a | tbolt | March 27, 2015, 08:25:41 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
My Notes from the teardown of my C1 Miner1. Be aware that the cooling blocks (th…
|
n/a | tbolt | March 26, 2015, 05:55:07 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
hii got problem with one unit.one of boards is dropping after few hours of hashi…
|
n/a | tbolt | March 26, 2015, 04:46:09 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
hii got problem with one unit.one of boards is dropping after few hours of hashi…
|
n/a | tbolt | March 26, 2015, 10:52:02 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Odd underclocking success here. Thought I'd post it :200Mhz Freq, 071v, 840Gh/s…
|
n/a | tbolt | March 21, 2015, 10:58:28 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
About a week ago I upgraded firmware (yes it's old firmware I just never did it)…
|
n/a | tbolt | March 19, 2015, 04:26:00 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
@BitmainWarrantyHow about passing this on to the engineers while you are at it:O…
|
n/a | tbolt | March 15, 2015, 01:44:58 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
A difficulty with my C1#2. I changed the parameters including password and can…
|
n/a | tbolt | March 12, 2015, 09:50:16 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Anyone try the new C1 firmware on the Bitmain site yet?Interesting that the date…
|
n/a | tbolt | March 11, 2015, 11:22:50 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I run at 1.007TH/s on 2 miners with stock setting. I want my 0.001TH/s Bitmain!J…
|
n/a | tbolt | February 12, 2015, 09:31:02 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I run at 1.007TH/s on 2 miners with stock setting. I want my 0.001TH/s Bitmain!J…
|
n/a | tbolt | February 12, 2015, 07:23:51 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I have a batch 1 and batch 2 C1 Miner.I have been using this coolant since Octob…
|
n/a | tbolt | February 05, 2015, 11:31:55 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
My guess is copper. They have always been very careful to say to use coolant no…
|
n/a | tbolt | February 04, 2015, 06:38:40 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
When you are running at the office, are the network settings set to DHCP?
|
n/a | tbolt | January 13, 2015, 10:42:14 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I'm able to connect to the miner again but it's not hashing. Here are the screen…
|
n/a | tbolt | January 13, 2015, 07:03:19 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
[/quote]In other places it mentions copper in the radiator. [/quote]What other p…
|
n/a | tbolt | December 30, 2014, 10:45:44 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Mining C1 Cooling kit Item QTYAT360 Radiator 1SC-P60 pump 1N8 T…
|
n/a | tbolt | December 29, 2014, 06:47:22 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Oh I didn't have any specific cooling liquid so I am using distilled water at th…
|
n/a | tbolt | December 29, 2014, 06:36:17 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
C1 arrived in a record time. Miner is ok, but the cooling kit is the worst thing…
|
n/a | tbolt | December 21, 2014, 11:51:56 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
C1 arrived in a record time. Miner is ok, but the cooling kit is the worst thing…
|
n/a | tbolt | December 20, 2014, 03:40:16 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
QuoteI cant seem to be able to upload images.Basically, you have to upload the i…
|
n/a | tbolt | December 08, 2014, 12:13:12 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
As another heads up - Bitmain have recently upgraded their support capabilities,…
|
n/a | tbolt | December 08, 2014, 12:10:38 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
You should always format the SD card first using this:https://www.sdcard.org/dow…
|
n/a | tbolt | December 07, 2014, 08:49:13 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Received a DOA unit today. All it does is stay at that high pitched fan noise an…
|
n/a | tbolt | December 07, 2014, 11:33:29 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
what size is the tubing on the c1?N8http://www.moddiy.com/products/Syscooling-N8…
|
n/a | tbolt | December 06, 2014, 06:39:09 PM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
Before I even powered up my C1 Miner for the first time, I filled the cooling sy…
|
n/a | tbolt | December 01, 2014, 10:38:59 PM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
notlist3d was the one who came up with the idea for the Phobya fan board.Well do…
|
n/a | tbolt | December 01, 2014, 10:08:25 PM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
I'm still having issues with getting one of my miners to 1000TH/s. I've increase…
|
n/a | tbolt | December 01, 2014, 09:36:23 PM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
So no one is going to comment on the several users having X's in their ASIC stat…
|
n/a | tbolt | November 30, 2014, 05:44:21 PM |
|
|
|
ANTMINER S3 HELP Mining support
if you change the ip address in anyway & the webgui wont show up use : http://19…
|
n/a | tbolt | November 30, 2014, 11:35:45 AM |
|
|
|
[Guide] Dogie's Comprehensive Bitmain Antminer C1 Setup [HD] Hardware
Dogie,Recommend adding this:
|
n/a | tbolt | November 29, 2014, 12:10:13 PM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
Voltage Setting Modify voltage and Save&Apply, then need to Power off and Restar…
|
n/a | tbolt | November 28, 2014, 03:47:12 PM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
That's a PCI-e connector.Plug it in to the top of any available hashing board co…
|
n/a | tbolt | November 26, 2014, 02:40:15 PM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
@dogieIf your looking at the front of the miner with the fan facing you, which b…
|
n/a | tbolt | November 20, 2014, 12:56:15 PM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
@dogieIf your looking at the front of the miner with the fan facing you, which b…
|
n/a | tbolt | November 20, 2014, 09:51:29 AM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
Proper Pump And Fan PowerThanks to Bitmain especially Yoshi for help. As I know…
|
n/a | tbolt | November 17, 2014, 05:09:08 PM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
Please someone help me.As I told I can not access antminer IP address unique and…
|
n/a | tbolt | November 17, 2014, 03:37:35 PM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
If I buy one of these can I get a pump setup from elsewhere? Seems like the main…
|
n/a | tbolt | November 17, 2014, 11:31:17 AM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
Newly designed fan wiring harness,could be plugged in board directly from outsid…
|
n/a | tbolt | November 17, 2014, 11:21:06 AM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
Anyone OCed their C1?See page 6 - Post # 106
|
n/a | tbolt | November 15, 2014, 11:55:24 AM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
Hiya, If I were to buy one of the C1's batch 2 that ships on Nov 17th. How long…
|
n/a | tbolt | November 15, 2014, 11:25:55 AM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
What kind of connections do the radiator fans have on them? 3 pin, 4pin, or some…
|
n/a | tbolt | November 15, 2014, 11:17:02 AM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
Does C1 has an option for wifi (like S3 does).Has anyone explored this yet?The C…
|
n/a | tbolt | November 06, 2014, 10:56:04 AM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
GUI is unresponsive after 15 mins or so..Just going to check pumps etc now, its…
|
n/a | tbolt | November 04, 2014, 02:12:09 PM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
Try leaving the GUI up for 15 minutes - possibly it will give you more informati…
|
n/a | tbolt | November 04, 2014, 01:32:55 PM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
What are you seeing for temps on your C1s?
|
n/a | tbolt | November 01, 2014, 03:58:50 PM |
|
|
|
Liquid Cooled Miner C1 Discussion and Support Thread Hardware
@BITMAINDo you have any plans to offer an "C1 type" Water cooling upgrade kit?I…
|
n/a | tbolt | October 31, 2014, 10:39:27 AM |
|
|
|
BITMAIN‘s Liquid Cooled Miner C1: It is not only cool, but it is cool Hardware
@BITMAINPlease confirm the location (PSU or Board)to plug the 3x Fan And Water C…
|
n/a | tbolt | October 28, 2014, 07:03:25 PM |
|
|
|
BITMAIN‘s Liquid Cooled Miner C1: It is not only cool, but it is cool Hardware
My kit arrive today, here is some foto what is in the box.Question:Where does th…
|
n/a | tbolt | October 28, 2014, 06:37:01 PM |
|
|
|
BITMAIN‘s Liquid Cooled Miner C1: It is not only cool, but it is cool Hardware
Did anyone receive the Assembly Instructions with their C1 Cooling Kit?I did not…
|
n/a | tbolt | October 27, 2014, 04:39:47 PM |
|
|
|
BITMAIN‘s Liquid Cooled Miner C1: It is not only cool, but it is cool Hardware
Come on guys, it was a request..My unit arrives tomorrow.A Manual would be good…
|
n/a | tbolt | October 27, 2014, 04:31:43 PM |
|
|
|
BITMAIN‘s Liquid Cooled Miner C1: It is not only cool, but it is cool Hardware
@BitmainWarranty,Please post the C1 Miner "Manual" and "Firmware" to the Bitmain…
|
n/a | tbolt | October 27, 2014, 04:06:05 PM |
|
|
|
BITMAIN‘s Liquid Cooled Miner C1: It is not only cool, but it is cool Hardware
@BitmainWarranty,Please post the C1 Miner "Manual" and "Firmware" to the Bitmain…
|
n/a | tbolt | October 27, 2014, 11:27:05 AM |
|
|
|
BITMAIN‘s Liquid Cooled Miner C1: It is not only cool, but it is cool Hardware
when ordering the cooling kits, is the 'International Express' option optional?…
|
n/a | tbolt | October 21, 2014, 04:31:18 PM |
|
|
|
BITMAIN‘s Liquid Cooled Miner C1: It is not only cool, but it is cool Hardware
*Get 2L if you think you might spill or want spare.*^Optional but highly recomme…
|
n/a | tbolt | October 17, 2014, 09:38:45 PM |
|
|
|
BITMAIN‘s Liquid Cooled Miner C1: It is not only cool, but it is cool Hardware |
n/a | tbolt | October 16, 2014, 07:18:38 PM |
|
|
|
BITMAIN‘s Liquid Cooled Miner C1: It is not only cool, but it is cool Hardware |
n/a | tbolt | October 16, 2014, 10:52:23 AM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
Bitmain S1 upgrade kits..Well after pulling my hair out for a couple of hours it…
|
n/a | tbolt | September 23, 2014, 07:25:09 AM |
|
|
|
ANTMINER S3 Discussion and Support Thread. Hardware
As another heads up - Bitmain have recently upgraded their support capabilities,…
|
n/a | tbolt | September 22, 2014, 11:21:28 AM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
Hi!I hope you could help me.Just received my two Antminer S3+ batch 8. One is wo…
|
n/a | tbolt | September 18, 2014, 03:08:42 PM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
Hello again.I just received another S3 and have some questions. First off, how c…
|
n/a | tbolt | August 28, 2014, 02:03:29 PM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
Qty. 2 - S3+sAs a home miner, I'm wondering if I should set the IP Address to DH…
|
n/a | tbolt | August 23, 2014, 11:00:28 PM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
I don't plan on overclocking.I purchased Qty. 2 - Corsair HX650 PSUs for my Qty.…
|
n/a | tbolt | August 23, 2014, 04:14:09 PM |
Pages:
Jump to: