| Content | Score | Started by | Date posted | ||
 |
 |
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
I haven't gotten around to adjusting the parts needed for the R606 to run on mac…
|
n/a | vh | June 25, 2019, 09:46:02 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
For mining, there's just a small block of json text that is sent back and forth…
|
n/a | vh | June 23, 2019, 04:18:40 PM |
|
|
|
GekkoScience 2Pac/Compac BM1384 Stickminer Official Support Thread Hardware
I'd like to try and run a single instance of cgminer for each stick and see how…
|
n/a | vh | June 17, 2019, 11:28:37 AM |
|
|
|
Announcing GekkoScience's new USB stick miner, the aptly-named NewPac Hardware
@merlin3650I had some measurements a little further into the thread. https://b…
|
n/a | vh | June 17, 2019, 10:20:04 AM |
|
|
|
what is child connection on cgminer Mining support
Edit: I think it is normal for miners to make child connections, bcz i have seen…
|
n/a | vh | June 07, 2019, 07:02:06 PM |
|
|
|
[WTS] Rachio 3 Sprinkler Controller, 16 Zone - USA Only Goods
16 Zone - Rachio 3 Smart Sprinkler ControllerIncludes enclosure in photo & groun…
|
n/a | vh | June 05, 2019, 01:43:16 PM |
|
|
|
Custom Mining Proxy ? Mining support
Nginx in stream mode should be able to do what you need.https://docs.nginx.com/n…
|
n/a | vh | May 30, 2019, 03:45:09 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
hmm. that is definitely a new / unreported one. looks like part of libusb co…
|
n/a | vh | May 31, 2019, 01:11:21 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Review this post regarding the potentiometer: https://bitcointalk.org/index.php?…
|
n/a | vh | May 30, 2019, 02:43:04 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
@ProgrammerFoxSomeday... maybe. The recommended mitigation steps (best / bette…
|
n/a | vh | May 30, 2019, 09:56:50 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Thanks for the feedback of (9e51f0b) vs (a62385f).Current tally:Better for: c…
|
n/a | vh | May 28, 2019, 04:49:33 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
New build (7a48c8f)Same instructions: rename (save), clone, build. Add new…
|
n/a | vh | December 13, 2018, 01:20:41 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
@evade_57pool diff automatically changes upward toward the network diff to force…
|
n/a | vh | May 13, 2019, 09:49:08 PM |
|
|
|
GekkoScience 2Pac/Compac BM1384 Stickminer Official Support Thread Hardware
@ZimbaCardiHop on over to the NewPac / R606 thread. Grab the latest code and c…
|
n/a | vh | May 29, 2019, 11:08:30 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Hi GekkoScience,Why is my R606 always running at around 200MHZ???Shouldn't it be…
|
n/a | vh | May 27, 2019, 10:41:18 AM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Yes, "Dec 13, 2018 @ 3339a51" is the latest version (for the NewPac).While we're…
|
n/a | vh | April 07, 2019, 08:35:05 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
#########################################GekkoScience NewPac / Terminus R606 (BM…
|
n/a | vh | October 19, 2018, 09:53:01 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
New build: (d76cd8a) (9e51f0b)Linux instructions: save (rename folder), clone…
|
n/a | vh | May 26, 2019, 08:12:58 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
@DieselWeaseIThose asic chips of the R606 expects work every few ms, on the dot.…
|
n/a | vh | May 18, 2019, 10:10:20 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
My altcoin source code is here...These are bitcoin miners. If they happen to w…
|
n/a | vh | May 15, 2019, 02:05:23 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
is it normal with asic boost and newpac's, the freq goes down @first? With no as…
|
n/a | vh | May 14, 2019, 11:30:51 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Wow, this new version just went straight to 700Mzh with no issues on voltage lev…
|
n/a | vh | May 14, 2019, 09:57:56 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
@sidehackI'm working through an issue with gt_addict. The combination of his (WI…
|
n/a | vh | May 14, 2019, 10:19:13 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
@WilcoWiThe miner has an upper frequency boundary for performance, that message…
|
n/a | vh | May 13, 2019, 08:06:25 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
There's a hint in the first post's Q&A section that might work for you.
|
n/a | vh | May 14, 2019, 06:11:13 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Highly surprised any previous version didn't flag AV.The safest path is to revie…
|
n/a | vh | May 14, 2019, 05:32:34 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
New build (ef74c27)Instructions for linux: rename old (save), clone again, bu…
|
n/a | vh | May 11, 2019, 09:58:29 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
@mstrozierCheck if it can settle at a higher frequency when connected to a teste…
|
n/a | vh | May 09, 2019, 03:06:53 PM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
That would be the autotune version, auto-tuning. For the most part, you can cons…
|
n/a | vh | May 07, 2019, 09:47:39 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
Try running it with just a few miners at a time to see if you get the same behav…
|
n/a | vh | May 03, 2019, 09:02:53 AM |
|
|
|
GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread Hardware
I’ll fix that warning in the next commit. Looks like you may be missing the zlib…
|
n/a | vh | May 02, 2019, 10:39:00 PM |
|
|
|
GekkoScience Terminus R606 750GH (up to 1TH) quiet miner, now shipping Hardware
Misc Stats : If you're keeping it as a Lottery Machine:Bitcoin 1st Prize : 12.5B…
|
n/a | vh | May 01, 2019, 05:17:48 PM |
|
|
|
GekkoScience Terminus R606 750GH (up to 1TH) quiet miner, now shipping Hardware
@philipma1957awesome.@kingofhammersRolling in the official support into the NewP…
|
n/a | vh | May 01, 2019, 04:56:17 PM |
|
|
|
GekkoScience Terminus R606 up to 1TH quiet miner, available for pre-order Hardware
do I load zadig and do winusb driverZadig -> WinUSB, would be the correct choice…
|
n/a | vh | May 01, 2019, 04:34:47 PM |
|
|
|
GekkoScience Terminus R606 up to 1TH quiet miner, available for pre-order Hardware
Visit this post: Latest R606 Code & Notes.Grab from : April 30 @ 0d524aaKick off…
|
n/a | vh | May 01, 2019, 12:29:29 PM |
|
|
|
GekkoScience Terminus R606 up to 1TH quiet miner, available for pre-order Hardware
As those number approach near 1 ms, we'll begin hitting the usb bus limit per mi…
|
n/a | vh | April 30, 2019, 01:40:00 PM |
|
|
|
GekkoScience Terminus R606 up to 1TH quiet miner, available for pre-order Hardware
That's the most recent stable one. You'll occasionally see rejects during the…
|
n/a | vh | April 29, 2019, 09:03:14 PM |
|
|
|
GekkoScience Terminus R606 up to 1TH quiet miner, available for pre-order Hardware
--gekko-r606-freqCool, at least the pools on the supported list are behaving for…
|
n/a | vh | April 29, 2019, 09:45:41 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Use a powered hub.Could be DoA, but possible low power condition keeping it from…
|
n/a | vh | April 24, 2019, 02:28:39 PM |
|
|
|
GekkoScience Terminus R606 up to 1TH quiet miner, available for pre-order Hardware
No, I don't think you need to match the pool, just ensure you are counting nonce…
|
n/a | vh | April 24, 2019, 09:41:48 AM |
|
|
|
GekkoScience Terminus R606 up to 1TH quiet miner, available for pre-order Hardware
@rockmoneyKeep sending me those headers as you cycle through them. Super usefu…
|
n/a | vh | April 22, 2019, 12:45:27 AM |
|
|
|
GekkoScience Terminus R606 up to 1TH quiet miner, available for pre-order Hardware
Thanks Kano."extra bit" to "standard" ratio is very close to 3:1, which is as ex…
|
n/a | vh | April 21, 2019, 05:50:21 PM |
|
|
|
GekkoScience Terminus R606 up to 1TH quiet miner, available for pre-order Hardware
Center link of my signature, I've updated it with a few additional recently revi…
|
n/a | vh | April 21, 2019, 02:07:32 PM |
|
|
|
Failed to initialise error on cgminer 4.11.1 (macOS 10.12.6) Hardware
Hello all,Just received a NewPac but can't seem to get cgminer 4.11.1 (installed…
|
n/a | vh | April 17, 2019, 12:12:45 AM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
@goldsounds"If i just do one it runs fine, the best at 350mhz (about 65gh/s) any…
|
n/a | vh | April 10, 2019, 08:25:21 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
@KanoOver in the r606 branch.@gt_addictGot one of my test system set up to mimic…
|
n/a | vh | April 10, 2019, 07:22:39 AM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
You're good. No need to adjust the miner itself.I have enough from your descri…
|
n/a | vh | April 10, 2019, 12:19:41 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
That's some mighty fine sleuthing there. If you have a user.worker you can PM m…
|
n/a | vh | April 09, 2019, 01:59:36 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
You'll need to set a target frequency.Based on what you described there, you'd w…
|
n/a | vh | April 08, 2019, 09:58:44 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
@Gage-Miner(Re) Read the first post.How far did you get in the build process?@gt…
|
n/a | vh | April 08, 2019, 11:45:57 AM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Auto anything is usually too generic to accommodate every case. A little hesita…
|
n/a | vh | April 08, 2019, 09:53:34 AM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Try setting them at 175MHz. You might get another 10-25GH/s if you set it bet…
|
n/a | vh | April 06, 2019, 11:13:29 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Unplug the miner and let it rest for an hour without power.Confirm the potentiom…
|
n/a | vh | March 10, 2019, 01:22:27 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Quote from: WilcoWi link=topic=5053833.msg50020682#msg50020682Btw i use GS hub..…
|
n/a | vh | March 04, 2019, 04:23:29 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Is this the point where i have to adjust the voltage of the 2nd stick? like sayd…
|
n/a | vh | March 04, 2019, 12:29:03 PM |
|
|
|
Announcing GekkoScience's new USB stick miner, the aptly-named NewPac Hardware
Please set them to be high.In case the original comment didn't register.Leave th…
|
n/a | vh | February 28, 2019, 01:54:01 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
At 4.3GH/s, a 1 diff nonce should appear every second on average.Scaled to your…
|
n/a | vh | February 12, 2019, 02:20:34 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
@ElbaInvestGo to the first post and scroll down to the OSX section.@Cipto1758Add…
|
n/a | vh | January 28, 2019, 01:50:15 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
run the test_mining.bat file that is included in the directory.if it doesn't sta…
|
n/a | vh | January 27, 2019, 12:02:04 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Typically pools won't have stats for your miner unless you send a share that is…
|
n/a | vh | January 25, 2019, 09:35:27 PM |
|
|
|
GekkoScience 2Pac/Compac BM1384 Stickminer Official Support Thread Hardware
Frequency is capped at 500MHz in the code. I've only ever reached 325MHz due to…
|
n/a | vh | January 23, 2019, 03:02:58 PM |
|
|
|
GekkoScience 2Pac/Compac BM1384 Stickminer Official Support Thread Hardware
The problem is when I try Code: CFLAGS="-O2 -march=native" ./autogen.sh --enabl…
|
n/a | vh | January 02, 2019, 11:07:55 AM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Btw any idea what the heck is causing this crash running cgminer with 1 newpac a…
|
n/a | vh | December 23, 2018, 02:03:58 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Going to try and get them upto 500m over the next couple of days but aslong as i…
|
n/a | vh | December 19, 2018, 09:54:44 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Active cooling, and directly powered by a 5V 60A power supply instead of USB's c…
|
n/a | vh | December 17, 2018, 08:13:57 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Currently running version 60d9f64I have gotten "Segmentation fault (core dumped)…
|
n/a | vh | December 14, 2018, 09:16:19 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Assuming that was the end of this issue.I matched the sleep time in one of the t…
|
n/a | vh | December 13, 2018, 05:37:24 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
The pc i initially tried it on is intel, the second is a ryzen mining rig and st…
|
n/a | vh | December 13, 2018, 01:06:24 AM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Update:-Unplugged the both sticks from the hub and plugged ONE stick directly in…
|
n/a | vh | December 12, 2018, 11:10:08 AM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Return the stick to it's factory vcore to ease power draw at high frequency. Te…
|
n/a | vh | December 11, 2018, 09:24:51 AM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
vh:Thanks for the update! I noticed that the hardware error percentage rate has…
|
n/a | vh | December 11, 2018, 12:12:37 AM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Cant seem to get mine to run nicelt past 300mhz the hashrate drops to 5gh then b…
|
n/a | vh | December 08, 2018, 11:40:34 AM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Sounds like the text UI library is not installed by default in Ubuntu 18.Code:su…
|
n/a | vh | December 07, 2018, 11:22:31 AM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
A new build is available (9d66fd3):Windows binary: cgminer-4.11.1-windows-gekko-…
|
n/a | vh | December 06, 2018, 08:45:03 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
I did that and no luck.I tried to remove and plug back in the newpacs, getting t…
|
n/a | vh | November 28, 2018, 09:20:37 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Post the pool name.I’m going to take an initial assumption and start with bravo-…
|
n/a | vh | November 23, 2018, 03:15:21 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
solo.ckpool.org for me. darn, i was hoping it would be a simple one.retried but…
|
n/a | vh | November 23, 2018, 05:00:53 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Thanks vh. for example, with a single newpac at 40 gh, diff should be 200? If I'…
|
n/a | vh | November 22, 2018, 02:43:19 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
What is recommended for diff if your mixing 2pacs and newpacs? Still 32? I'm let…
|
n/a | vh | November 22, 2018, 01:04:28 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
New build (90e7d31). Some minor updates (medium-to-major if it affects you)Win…
|
n/a | vh | November 20, 2018, 01:50:54 PM |
|
|
|
Review of Sidehack's Newpac with comparisons to the 2pac and the compac. Hardware
I suspect the 2Pac is also bringing up the average quite a bit.
|
n/a | vh | November 19, 2018, 02:12:38 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Anybody stable on raspian? cgminer is still crashing every 24-48 hours for me. G…
|
n/a | vh | November 14, 2018, 10:34:06 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Vh, does the new cgminer version include asicboost or is it still in developmen…
|
n/a | vh | November 10, 2018, 09:11:04 AM |
|
|
|
Announcing GekkoScience's new USB stick miner, the aptly-named NewPac Hardware
let us know improvement in hash or power or both.Hash rate stays as expected fo…
|
n/a | vh | November 06, 2018, 10:55:49 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
A new build is available: 09a2f37Windows binary: http://23.108.83.14/images/cgm…
|
n/a | vh | November 06, 2018, 10:46:13 PM |
|
|
|
Announcing GekkoScience's new USB stick miner, the aptly-named NewPac Hardware
Looks like AsicBoost will be coming soon to these NewPacs. Check for it in an…
|
n/a | vh | November 05, 2018, 03:45:17 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
So I just got my NewPac works fine with windows7.But I can't make work with my n…
|
n/a | vh | November 04, 2018, 08:59:45 PM |
|
|
|
GekkoScience 2Pac/Compac BM1384 Stickminer Official Support Thread Hardware
#########################################GekkoScience 2Pac BM1384 Stickminer Off…
|
n/a | vh | January 25, 2017, 11:00:52 PM |
|
|
|
GekkoScience 2Pac/Compac BM1384 Stickminer Official Support Thread Hardware
I just loaded a few PCs with Linux mint.Your software mentions it is for Ubuntu…
|
n/a | vh | October 22, 2018, 11:47:20 PM |
|
|
|
GekkoScience 2Pac/Compac BM1384 Stickminer Official Support Thread Hardware
Hi all,My Win10 updated overnight and now I get an error when I try to run cgmin…
|
n/a | vh | October 22, 2018, 09:48:33 PM |
|
|
|
GekkoScience 2Pac/Compac BM1384 Stickminer Official Support Thread Hardware
GSD0: GetResults (amt=0 err=-7 ern=138) This error is often generated by an issu…
|
n/a | vh | October 22, 2018, 09:40:25 PM |
|
|
|
Announcing GekkoScience's new USB stick miner, the aptly-named NewPac Hardware
Started a new thread for NewPac technical discussion and support: https://bitc…
|
n/a | vh | October 19, 2018, 10:05:22 PM |
|
|
|
GekkoScience 2Pac/Compac BM1384 Stickminer Official Support Thread Hardware
Hello all i was hoping someone could tell me whats going on. When my workers ar…
|
n/a | vh | October 19, 2018, 09:56:42 PM |
|
|
|
GekkoScience NewPac Stickminer Official Support Thread Hardware
Linux cgminer.exe cross-compile steps (for windows use) Ubuntu 16.04.1 LTS ne…
|
n/a | vh | October 19, 2018, 09:53:14 PM |
|
|
|
CKPool Stats - iPhone App Pools
i browsed thru but did not see where it was mentioned - I apologize if it was, o…
|
n/a | vh | October 19, 2018, 03:10:23 PM |
|
|
|
CKPool Stats - iPhone App Pools
just loaded the app. i mistyped a direct address. can't seem to edit/remove it…
|
n/a | vh | October 12, 2018, 12:34:33 PM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
Quoting part of original message and removed the one with first post inside.boys…
|
n/a | vh | October 08, 2018, 10:11:26 AM |
|
|
|
Miner not detected... Hardware
Hi guys, I recently purchased a GekkoScience 2Pac BM1384 Stickminer fr…
|
n/a | vh | September 16, 2018, 11:21:39 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I spotted an updated version of cgminer upstream. Pulled in those changes with…
|
n/a | vh | September 15, 2018, 01:12:42 AM |
|
|
|
GekkoScience 2Pac BM1384 Stickminer Official Support Thread Hardware
I got it working on my windows 10 machine just fine after my first try, it's my…
|
n/a | vh | May 30, 2018, 09:48:53 PM |
Jump to: