Pages:
Author

Topic: . - page 20. (Read 14145 times)

legendary
Activity: 1050
Merit: 1000
June 11, 2015, 02:47:45 PM
#20
 niitassin if im not alowed to pm you please supply a different email address as its failed to send there 3 times

rdna sent along with email  Cool didn't really know when to capture the screenshot so did 2

edit email failed too large removed first image, failed again

failed 3 times pm sent ...
newbie
Activity: 55
Merit: 0
June 11, 2015, 02:42:02 PM
#19
There's nothing here for new miners, just for old XNA-or-whatever holders.

No seed nodes on launch, source doesn't compile... Usual bull.
newbie
Activity: 25
Merit: 100
June 11, 2015, 01:26:38 PM
#18

Unfortunately, yes because the Proof Of Work of this coin total output is less, I have to set this value....
newbie
Activity: 55
Merit: 0
June 11, 2015, 02:38:00 PM
#18
PoW Info: Last Block is 10000
PoW Reward: 8 CYPT, No Halving

So total coins in POW is 80,000.

Masternode Payment Requirements: 17259.22 CYPT

So you need 21% of POW coins to run masternode?!


Not exactly, most coins are distributed through Proof Of Burn, not Proof Of Work....

The POW phase is a total waste. You could have skipped it and did your pre-mine in 1 block.

newbie
Activity: 55
Merit: 0
June 11, 2015, 02:32:53 PM
#17
PoW Info: Last Block is 10000
PoW Reward: 8 CYPT, No Halving

So total coins in POW is 80,000.

Masternode Payment Requirements: 17259.22 CYPT

So you need 21% of POW coins to run masternode?!
legendary
Activity: 1568
Merit: 1003
🚀🚀 ATHERO.IO 🚀🚀
June 11, 2015, 02:23:11 PM
#16
you said 20million premined coins but currently there 25million in supply on xna so how will it work with 1:1
newbie
Activity: 25
Merit: 100
June 11, 2015, 01:19:23 PM
#15
When and how  to swap XNA in rDNA in XCYPT ?

At 1 PM Indian Standard Time or Simply Put, after 2 Hours....
sr. member
Activity: 827
Merit: 250
June 11, 2015, 02:18:40 PM
#15
hi dev,

i don´t understand...

become thx for PoB XNA --> CYPT this is a GOOD IDEA!!!

1-but do you have decide to abandon XNA coin for CYPT?
2-what is the change XNA --> CYPT?

cheers,
smic
sr. member
Activity: 827
Merit: 250
June 11, 2015, 02:15:40 PM
#14
wallet rDNA no sync  Huh
taiga use 2.3.0 wallet XNA with nodes i have posted in XNA OP.

newbie
Activity: 25
Merit: 100
June 11, 2015, 01:09:21 PM
#13
This about sums up the state of crypto these days. A fools den, better stick to the oldies that were created when things were pristine.

"There is a premine of 20001000 CYPT for the Proof Of Burn Phase that will be initiated @ 3 AM IST, The remaining will be burnt."

I am serious when I said that! The proof of my old coin is:
https://bitcointalk.org/index.php?topic=1046799.1060
sr. member
Activity: 278
Merit: 250
June 11, 2015, 02:12:17 PM
#13
wallet rDNA no sync  Huh
legendary
Activity: 1050
Merit: 1000
June 11, 2015, 01:58:51 PM
#12
rdna sent along with email  Cool didn't really know when to capture the screenshot so did 2

edit email failed too large removed first image, failed again

failed 3 times pm sent ...
tyz
legendary
Activity: 3360
Merit: 1533
June 11, 2015, 01:47:15 PM
#11
The mixure of the algorithms looks very interesting. I will keep an eye on the coin.
newbie
Activity: 25
Merit: 100
June 11, 2015, 12:45:18 PM
#10
int64_t GetProofOfWorkReward(int64_t nHeight, int64_t nFees)
{
    int64_t nSubsidy = 8 * COIN;
    
    if (nHeight == 1)
    {
      nSubsidy = 20001000 * COIN;
   }
      
    LogPrint("creation", "GetProofOfWorkReward() : create=%s nSubsidy=%d\n", FormatMoney(nSubsidy), nSubsidy);

    return nSubsidy + nFees;
}


20million premine with block reward of 8 coins

watch how the hashrate will go to 0 because the dev doesn't say a word about that premine

That is for the Proof Of Burn Swapping for DeOxyRibose rDNA Users man, I don't get to keep a Dime....


Way to make this look like a NEW coin launch when it obviously is not.  Suck it dev.

It wasn't, I needed a clean slate and so I did, BTW I never mentioned Ninja (That means new immediate launch)!
legendary
Activity: 924
Merit: 1000
June 11, 2015, 01:28:31 PM
#10

Unfortunately, yes because the Proof Of Work of this coin total output is less, I have to set this value....

so why 20M premine ?

after you burned few millions rDNA, 20M premine should be enough for a 1:1 ..
legendary
Activity: 924
Merit: 1000
June 11, 2015, 01:24:29 PM
#9
newbie
Activity: 25
Merit: 100
June 11, 2015, 12:41:59 PM
#8
int64_t GetProofOfWorkReward(int64_t nHeight, int64_t nFees)
{
    int64_t nSubsidy = 8 * COIN;
    
    if (nHeight == 1)
    {
      nSubsidy = 20001000 * COIN;
   }
      
    LogPrint("creation", "GetProofOfWorkReward() : create=%s nSubsidy=%d\n", FormatMoney(nSubsidy), nSubsidy);

    return nSubsidy + nFees;
}


20million premine with block reward of 8 coins

watch how the hashrate will go to 0 because the dev doesn't say a word about that premine

That is for the Proof Of Burn Swapping for DeOxyRibose rDNA Users man, I don't get to keep a Dime....

It's currently residing at Suprnova's Systems and then will be transferred to CNiSzrFpiRpRoCma1g8EKcKhf6cb7bH7Mq
sr. member
Activity: 278
Merit: 250
June 11, 2015, 01:21:40 PM
#8
When and how  to swap XNA in rDNA in XCYPT ?

At 1 PM Indian Standard Time or Simply Put, after 2 Hours....


I will wait
sr. member
Activity: 278
Merit: 250
June 11, 2015, 01:17:55 PM
#7
When and how  to swap XNA in rDNA in XCYPT ?
newbie
Activity: 25
Merit: 100
June 11, 2015, 12:33:10 PM
#6
Holy Shit! 6,957.46 MH/s
Pages:
Jump to: