Topic: - - page 4. (Read 7791 times)
Quote from: TempleGuard
I completely stopped the miner then changed the settings and then started it again. Should I stop it again and try to keep it stopped for a little bit longer?
Wtc client is snyced and nothing shows up, including in 'unconfirmed' and my miner has been reports accepted shares (2000 and counting) every second for the last 3 hours (~2 hours and 45 minutes). I notice that my address is there on the 'graph' section of the website but according to it I've only mined around 3.20 am and have a silly hashrate.
I use cudaminer without stratum for what is worth.
Wtc client is snyced and nothing shows up, including in 'unconfirmed' and my miner has been reports accepted shares (2000 and counting) every second for the last 3 hours (~2 hours and 45 minutes). I notice that my address is there on the 'graph' section of the website but according to it I've only mined around 3.20 am and have a silly hashrate.
I use cudaminer without stratum for what is worth.
Strange, not sure why. Can you try another miner such as GUIMiner and use Stratum? Also need to be using -scrypt command.
I'm not sure why you are having problems, everyone else seems to be fine so the pool itself is running normal.
I just tried other miners but only cudaminer (which is also used by guiminer) can use my Nvidia card properly. Clearly it worked at some point because I can be seen in the graph in the middle of the night and because I have been paid 3.6 wtc in blocks of .15. You said that there were recent payments sent to my address? How come those haven't gotten through. And if I've been mining and the server has been accepting the shares then what is happening with the wtcs mined from that work?
I am going to leave it offline for a bit and check if anything arrives.
Also, I was curious if there is any way to check in the worldcoin client which pool your wtc coins in from (since they show up as type: mined)
Quote from: TempleGuard
I completely stopped the miner then changed the settings and then started it again. Should I stop it again and try to keep it stopped for a little bit longer?
Wtc client is snyced and nothing shows up, including in 'unconfirmed' and my miner has been reports accepted shares (2000 and counting) every second for the last 3 hours (~2 hours and 45 minutes). I notice that my address is there on the 'graph' section of the website but according to it I've only mined around 3.20 am and have a silly hashrate.
I use cudaminer without stratum for what is worth.
Wtc client is snyced and nothing shows up, including in 'unconfirmed' and my miner has been reports accepted shares (2000 and counting) every second for the last 3 hours (~2 hours and 45 minutes). I notice that my address is there on the 'graph' section of the website but according to it I've only mined around 3.20 am and have a silly hashrate.
I use cudaminer without stratum for what is worth.
Strange, not sure why. Can you try another miner such as GUIMiner and use Stratum? Also need to be using -scrypt command.
I'm not sure why you are having problems, everyone else seems to be fine so the pool itself is running normal.
Quote from: TempleGuard
Hmm, I've been mining with default settings during the night and I got some wtc when I synced my worldcoin client. Then I changed my settings (added +0.0000xxxx type of thing) and I have been mining for 2-3 hours since then with a few thousand accepted shares but nothing appears in my client nor on the pool's website.
Do you have to wait again after changing settings?
wtc address is: WbpUUAUTWkiKFn1MbCQ5rvxThjToYACgn8 if that makes a difference.
Do you have to wait again after changing settings?
wtc address is: WbpUUAUTWkiKFn1MbCQ5rvxThjToYACgn8 if that makes a difference.
Is the client still synced? Did you stop and start the miner after adding the optimisation (+00...) to your address?
After 1 hour of mining you should start to receive payouts - I have noticed the payout section wallets aren't always there but still get paid.
Last payouts were two at 22 past, one at 23 past and one at 24 past so they are coming through from the sever end.
I completely stopped the miner then changed the settings and then started it again. Should I stop it again and try to keep it stopped for a little bit longer?
Wtc client is snyced and nothing shows up, including in 'unconfirmed' and my miner has been reports accepted shares (2000 and counting) every second for the last 3 hours (~2 hours and 45 minutes). I notice that my address is there on the 'graph' section of the website but according to it I've only mined around 3.20 am and have a silly hashrate.
I use cudaminer without stratum for what is worth.
Quote from: TempleGuard
Hmm, I've been mining with default settings during the night and I got some wtc when I synced my worldcoin client. Then I changed my settings (added +0.0000xxxx type of thing) and I have been mining for 2-3 hours since then with a few thousand accepted shares but nothing appears in my client nor on the pool's website.
Do you have to wait again after changing settings?
wtc address is: WbpUUAUTWkiKFn1MbCQ5rvxThjToYACgn8 if that makes a difference.
Do you have to wait again after changing settings?
wtc address is: WbpUUAUTWkiKFn1MbCQ5rvxThjToYACgn8 if that makes a difference.
Is the client still synced? Did you stop and start the miner after adding the optimisation (+00...) to your address?
After 1 hour of mining you should start to receive payouts - I have noticed the payout section wallets aren't always there but still get paid.
Last payouts were two at 22 past, one at 23 past and one at 24 past so they are coming through from the sever end.
Do I need to wait the 1-3 hours every time I reconnect to the pool?
What happens to my accepted shares from the first hours of mining?
What happens to my accepted shares from the first hours of mining?
No, it should save and pickup where you left off on that round. If not, you will still be paid.
Do you have to wait again after changing settings?
wtc address is: WbpUUAUTWkiKFn1MbCQ5rvxThjToYACgn8 if that makes a difference.
Do I need to wait the 1-3 hours every time I reconnect to the pool?
What happens to my accepted shares from the first hours of mining?
What happens to my accepted shares from the first hours of mining?
No, it should save and pickup where you left off on that round. If not, you will still be paid.
some pools seem constantly DDoS'ed sucks
Pool has been up - only one DDOS occured here been running fine for 10+ hours @ 115MH/s.
Why I got error message: pool 0 JSON stratum auth failed: again and again. 
my setting is below since I got two 7950s running with 1240kH/s totally.
{
"url" : "stratum+tcp://212.48.67.50:8336",
"user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
"pass" : "x"
},
It is connected now, but all shares are rejected, if it is normal when connected to p2pool in the begining? my setting is below since I got two 7950s running with 1240kH/s totally.{
"url" : "stratum+tcp://212.48.67.50:8336",
"user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
"pass" : "x"
},
Hi,
No that's not normal. This means you need to tweak your miner config (intensity etc).
Not sure why, pool is operating fine. Perhaps try another miner program.
Remember the settings in the original post are basic, and need to be competed by following mining connecting guides.
Why I got error message: pool 0 JSON stratum auth failed: again and again. my setting is below since I got two 7950s running with 1240kH/s totally.
{
"url" : "stratum+tcp://212.48.67.50:8336",
"user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
"pass" : "x"
},
It is connected now, but all shares are rejected, if it is normal when connected to p2pool in the begining? my setting is below since I got two 7950s running with 1240kH/s totally.{
"url" : "stratum+tcp://212.48.67.50:8336",
"user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
"pass" : "x"
},
Hi,
No that's not normal. This means you need to tweak your miner config (intensity etc).
Why I got error message: pool 0 JSON stratum auth failed: again and again. my setting is below since I got two 7950s running with 1240kH/s totally.
{
"url" : "stratum+tcp://212.48.67.50:8336",
"user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
"pass" : "x"
},
It is connected now, but all shares are rejected, if it is normal when connected to p2pool in the begining? my setting is below since I got two 7950s running with 1240kH/s totally.{
"url" : "stratum+tcp://212.48.67.50:8336",
"user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
"pass" : "x"
},
Hi,
No that's not normal. This means you need to tweak your miner config (intensity etc).
Why I got error message: pool 0 JSON stratum auth failed: again and again. my setting is below since I got two 7950s running with 1240kH/s totally.
{
"url" : "stratum+tcp://212.48.67.50:8336",
"user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
"pass" : "x"
},
It is connected now, but all shares are rejected, if it is normal when connected to p2pool in the begining? my setting is below since I got two 7950s running with 1240kH/s totally.{
"url" : "stratum+tcp://212.48.67.50:8336",
"user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
"pass" : "x"
},
Why I got error message: pool 0 JSON stratum auth failed: again and again. my setting is below since I got two 7950s running with 1240kH/s totally.
{
"url" : "stratum+tcp://212.48.67.50:8336",
"user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
"pass" : "x"
},
my setting is below since I got two 7950s running with 1240kH/s totally.{
"url" : "stratum+tcp://212.48.67.50:8336",
"user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
"pass" : "x"
},
Well, it's been quite a few hours now, and things are working excellently for me now. I ended up using the 1000kh setting (making shares of diff 76) and i'm getting good payouts frequently. Looks like I found my pool!
Awesome news! Glad you are liking it
Spread the word 
Jump to: