Thanks for the person who recommended this in my subreddit.
I'll add this to https://CryptX.io tonight.
I'll add this to https://CryptX.io tonight.
Wow that was fast.
Topic: . - page 18. (Read 39475 times)
Ok, I see you are getting shares & starting to earn now 
Whenever you guys decide to mine BTC --- please consider throwing that hash
into the new BTC p2pool ---- you could make MANY MANY bitcoins in 1 payout
Whenever you guys decide to mine BTC --- please consider throwing that hash
into the new BTC p2pool ---- you could make MANY MANY bitcoins in 1 payout
Yep, things are much better now. Still high reject rate, but I'm no longer losing 30% of my hashrate, so pretty much as long as bfgminer says I am submitting over 5GHs, I am within what I consider acceptable for mining an altcoin. (6.3GHs in antminers, with a chili miner that should be here in under 12 hours.)
lol!
I wish more big hashers would get the BTC pool going!
its not connected to any other peers/nodes/pools
and the payout would be SUPER if they find a block
only having to share payouts just in the local pool!
Even if it took a couple/few days of 24-7 mining --- the payoff would be worth it!
ALOT of BTC they could make --- some serious BTC! lol
1EoiVcUP9pU9rZFmFDddCZF9ntZzK8YFrc 8.59 GH/s no shares yet *****
1Bev6GEMbnsFq2WE4A6WEgj4dKKeBKxm6S 186.03 GH/s 933.97726759 STY
1PdZDnspzxWgrG9YxKvt3h81bfV44JbMqV 245.48 GH/s 2066.02273240 STY
**** There is something wrong with your miner!
These guys getting LOTS of blocks & PAYOUTS...
I know the p2pool is working fine.
You must have some setting or something configured wrong.
I wish more big hashers would get the BTC pool going!
its not connected to any other peers/nodes/pools
and the payout would be SUPER if they find a block
only having to share payouts just in the local pool!
Even if it took a couple/few days of 24-7 mining --- the payoff would be worth it!
ALOT of BTC they could make --- some serious BTC! lol
1EoiVcUP9pU9rZFmFDddCZF9ntZzK8YFrc 8.59 GH/s no shares yet *****
1Bev6GEMbnsFq2WE4A6WEgj4dKKeBKxm6S 186.03 GH/s 933.97726759 STY
1PdZDnspzxWgrG9YxKvt3h81bfV44JbMqV 245.48 GH/s 2066.02273240 STY
**** There is something wrong with your miner!
These guys getting LOTS of blocks & PAYOUTS...
I know the p2pool is working fine.
You must have some setting or something configured wrong.
pool just found its first block!
I see you are starting to earn now too.
I see you are starting to earn now too.
The 19 was me, I accidentally my Eligius address. I'm was mining for two for a moment there.
I'll give it a little while and see how it goes.
another miner just got in pool, and he is already showing earnings
the p2pool is working as it should.
When a pool is fresh and no data, it might have alot of rejects for the first few minutes
and then its good-to-go once it has some SHARES and data for the new pool.
i dropped out --- 30Mhs is a joke.
I see 2 active miners in the pool:
The other guy's payout amount is increasing...
Payout Address Hashrate Est.Payout Next Block
1EoiVcUP9pU9rZFmFDddCZF9ntZzk8YFrc 759.97 MH/s no shares yet
19gu3jok7czATPb5TR8EMMuQu8qrQ5e34B 4.04 GH/s 1075.36912596 STY
You must have a setting that is wrong in your miner if youre not getting shares...
I can with CPU minerd & this other guy seems to be too.
the p2pool is working as it should.
When a pool is fresh and no data, it might have alot of rejects for the first few minutes
and then its good-to-go once it has some SHARES and data for the new pool.
i dropped out --- 30Mhs is a joke.
I see 2 active miners in the pool:
The other guy's payout amount is increasing...
Payout Address Hashrate Est.Payout Next Block
1EoiVcUP9pU9rZFmFDddCZF9ntZzk8YFrc 759.97 MH/s no shares yet
19gu3jok7czATPb5TR8EMMuQu8qrQ5e34B 4.04 GH/s 1075.36912596 STY
You must have a setting that is wrong in your miner if youre not getting shares...
I can with CPU minerd & this other guy seems to be too.
I setup a BEN Benjamins p2pool last week when it launched
its sha256d also ...
STY is configured the SAME as BTC & BEN sha256 algo p2pools
the BTC & BEN pools work fine.
Also, using CPU miner on laptop ( and NOT on the p2pools server )
the minerd got enough shares to show up in pool.
maybe its your miner or its settings?
its sha256d also ...
STY is configured the SAME as BTC & BEN sha256 algo p2pools
the BTC & BEN pools work fine.
Also, using CPU miner on laptop ( and NOT on the p2pools server )
the minerd got enough shares to show up in pool.
maybe its your miner or its settings?
Doubt it. 110/25 accepted/rejected after zeroing out a minute ago. Scantime is 15 seconds, which should be plenty low enough, as I have this set to failover back to BTC too in case my pool goes down.
I setup a BEN Benjamins p2pool last week when it launched
its sha256d also ...
STY is configured the SAME as BTC & BEN sha256 algo p2pools
the BTC & BEN pools work fine.
Also, using CPU miner on laptop ( and NOT on the p2pools server )
the minerd got enough shares to show up in pool.
maybe its your miner or its settings?
its sha256d also ...
STY is configured the SAME as BTC & BEN sha256 algo p2pools
the BTC & BEN pools work fine.
Also, using CPU miner on laptop ( and NOT on the p2pools server )
the minerd got enough shares to show up in pool.
maybe its your miner or its settings?
I have my gpus on it and im not getting any shares?
its algo sha256d --- not scrypt!
my laptop getting shares with minerd -a sha256.....
pool shows me at 32Mhs --- so it does work.
are you using sha256d ?
oh - i see the hashrate graph hit 6Ghs
it takes a minute for new miners shares to show i think.
Are you getting ACCEPTED in your miner?
using sha256
accepted and a lot of stales
p2pool will not accept stales --- disable the submit stales in your miner
I don't do this as they should be negligible, which they are for the most part. 18% of my shares are being rejected for other reasons.
Its an i7 quadcore with 32GB ram --- not a 486!
The difficulty is alot less the BTC --- lower your scan time!
This pool is brand new, so at first there are alot of rejects for the first couple minutes...
thats because its a brand new pool that just came on line. LoL
I have the scantime adjusted. Anyways, as you said, it went down, but it's still at 20%. I only have 2 stale shares submitted, the rest are rejected for whatever reason by the pool.
I have my gpus on it and im not getting any shares?
its algo sha256d --- not scrypt!
my laptop getting shares with minerd -a sha256.....
pool shows me at 32Mhs --- so it does work.
are you using sha256d ?
oh - i see the hashrate graph hit 6Ghs
it takes a minute for new miners shares to show i think.
Are you getting ACCEPTED in your miner?
Its an i7 quadcore with 32GB ram --- not a 486!
The difficulty is alot less the BTC --- lower your scan time!
This pool is brand new, so at first there are alot of rejects for the first couple minutes...
thats because its a brand new pool that just came on line. LoL
Its an i7 quadcore with 32GB ram --- not a 486!
The difficulty is alot less the BTC --- lower your scan time!
This pool is brand new, so at first there are alot of rejects for the first couple minutes...
thats because its a brand new pool that just came on line. LoL
Jump to: