OK, so I tried installing 11.12 and 12.1 both, with the same results.
I tried this on one of my rigs: AMD x4 core, with 3x 5830s - Win 7 64bit
The 100% CPU bug is ..... improved I guess.
CPU usage before the bug on this rig was under 4% (of one core) total for 3 instances of poclbm. Now it's 40% - I wouldn't call that solved.
CGminer uses 40-50% if restricted to 1 core, but then GPU utilization drops below 99% - without restriction it uses about 10-15% per core.
But now for the real bad news - card performance dropped 14%. I had about 930Mh on this machine. Each card is running 950/300 clocks. Now I'm getting around 800Mh. I've tried several miners and messed with the settings....this is the best I can get.
I'll be switching back to 11.11 soon.
Topic: 100% CPU bug Windows finally solved (Multi GPU) with catalyst 11.12 - page 2. (Read 10089 times)
December 15, 2011, 03:51:15 PM
December 15, 2011, 01:17:36 PM
Also confirmed. However, I can no longer run a 256 worksize on my 5970's. 
Lost about 26mhash/sec per GPU. Pleh. Just can't win with these drivers...
Lost about 26mhash/sec per GPU. Pleh. Just can't win with these drivers... For the longest time I'd get the best hash rates with a 256 worksize on my 5970. Then for some reason (maybe I switched drivers, I don't remember) 128 gave me the best results. What miner version are you using? I'm using Phoenix 1.50.
December 15, 2011, 12:09:47 PM
Wow, thank god! It's about time!
I too can also confirm that mining on win 7 64 bit with a radeon 5970 with crossfire enabled works without 100% per core cpu usage.
I too can also confirm that mining on win 7 64 bit with a radeon 5970 with crossfire enabled works without 100% per core cpu usage.
December 15, 2011, 10:38:50 AM
It works! Finally! 
Very low cpu % on all cores.
Windows 7 x64
Core i5 2500k
2x Radeon HD6990
Very low cpu % on all cores.
Windows 7 x64
Core i5 2500k
2x Radeon HD6990
December 15, 2011, 10:19:36 AM
(marking) 
December 15, 2011, 09:35:03 AM
perhaps I should add: my fixed computer runs an AMD X6 cpu. Until this day, I had always had one fully used core. No luck still on AMD Dual Cores.
Once again: Win 7 32 bit, two actively mining GPUs.
Now works like charm on my dual core system (no onboard gpu present).
Once again: Win 7 32 bit, two actively mining GPUs.
Now works like charm on my dual core system (no onboard gpu present).
December 15, 2011, 08:25:36 AM
What about Linux ?
What is the CPU usage like on a low end CPU with multiple GPUs with a clean install of 11.12 ?
What is the CPU usage like on a low end CPU with multiple GPUs with a clean install of 11.12 ?
December 15, 2011, 06:49:07 AM
Ok, just to get this out of the way again. Are any of you running multiple cards who had the 100% cpu bug fixed?
December 15, 2011, 05:51:52 AM
Also confirmed. However, I can no longer run a 256 worksize on my 5970's. Lost about 26mhash/sec per GPU. Pleh. Just can't win with these drivers...
Lost about 26mhash/sec per GPU. Pleh. Just can't win with these drivers... Hasnt fixed cpu bug for me on win7/32 AND speed went down by 30mhash.
Reinstalled 11.11 speed is still down... will update after checking
Edit: 3x5850 in system
December 15, 2011, 05:09:29 AM
Strange, it doesn't seem to work on just any rig for me. One system with two cards mining (no onboard gpu) is fine. Here I get 0-4% pending cpu usage. Doesn't even matter if I put in a dummy plug or not. I still use those sometimes b/c they make overclocking much easier. On my other rig, I haven't yet been able to get it to work yet. Either my drivers are messed up although I spend quite some time installing and deinstalling/sweeping or is it cause I'm using multiple (3+) cards including onboard graphics or is it some software glitch...
On 5870s and 5770s there seem to be no issues with worksize for me.
On 5870s and 5770s there seem to be no issues with worksize for me.
December 15, 2011, 03:52:55 AM
really ?
December 15, 2011, 01:28:33 AM
that bites. have you tried it with the other vector settings and the smaller worksize?
rgr, thanks for the reply. I will be watching for your feedback on the results if you have time to check the other combos. I'm not able to get to my system to up the Cata drivers atm or would flip thru them myself.
December 15, 2011, 01:21:19 AM
that bites. have you tried it with the other vector settings and the smaller worksize?
December 15, 2011, 01:10:37 AM
Also confirmed. However, I can no longer run a 256 worksize on my 5970's. Lost about 26mhash/sec per GPU. Pleh. Just can't win with these drivers...
Lost about 26mhash/sec per GPU. Pleh. Just can't win with these drivers... that bites. have you tried it with the other vector settings and the smaller worksize?
December 15, 2011, 01:05:06 AM
Also confirmed. However, I can no longer run a 256 worksize on my 5970's. Lost about 26mhash/sec per GPU. Pleh. Just can't win with these drivers...
Lost about 26mhash/sec per GPU. Pleh. Just can't win with these drivers... 
December 15, 2011, 12:10:54 AM
I can confirm. CPU bug is finally gone with catalyst 11.12 Windows x64.
December 14, 2011, 11:09:34 PM
Hi guys,
I just noticed that the 100% CPU bug finally went away after installing AMD catalyst 11.12
and having only one monitor plugged into my main card (crossfire disabled).
I am using Windows 7 32 bit. We have been waiting for this for months!
Awesome!
I just noticed that the 100% CPU bug finally went away after installing AMD catalyst 11.12
and having only one monitor plugged into my main card (crossfire disabled).
I am using Windows 7 32 bit. We have been waiting for this for months!
Awesome!
Jump to: