I have my S1 direct beside my desk.
It is pretty silent. I would say about the noise of a normal desktop computer. My cube was way louder.
Only the changes in fanspeed are kind of annoying (from the noise-side. For power consumption it is good of course)
Topic: [1050 TH] BitMinter.com [1% PPLNS,Pays TxFees +MergedMining,Stratum,GBT,vardiff] - page 73. (Read 837180 times)
March 12, 2014, 09:20:27 AM
March 12, 2014, 08:47:03 AM
I'm considering jumping to an Antminer but I wonder how loud they are? Right now I'm pretty spoiled bc my Chilis have quiet coolers and before them I replaced my Jally fan with a Noctua. Where would you say these fall noise wise?
I wouldn't call the S1 silent, but it is far from loud. It is louder than a block erupter cube, but they ran nearly silent. The fan is big, so it doesn't make a whine noise like those 1U box fans. For me it has been a cadillac compared to all of my other miners, easy to setup, not mining_proxy needed. Just works, and switches between up to 3 pools automatically on any downtime. March 12, 2014, 07:23:59 AM
you want to save for an antminer s-1 they are very nice far far far better then a blade or a cube.
I decided that I would move back from btcguild.
I am now running 4 antminer s-1's around 720gh right here at the doc's.
I am hoping to expand to 6 or maybe 8 in the next month. this will have me at 1080- 1440gh.
I decided that I would move back from btcguild.
I am now running 4 antminer s-1's around 720gh right here at the doc's.
I am hoping to expand to 6 or maybe 8 in the next month. this will have me at 1080- 1440gh.
I'm considering jumping to an Antminer but I wonder how loud they are? Right now I'm pretty spoiled bc my Chilis have quiet coolers and before them I replaced my Jally fan with a Noctua. Where would you say these fall noise wise?
March 12, 2014, 07:16:47 AM
Can anyone from the pool help me with that ?
https://bitcointalksearch.org/topic/block-erupter-changing-the-chip-510260
https://bitcointalksearch.org/topic/block-erupter-changing-the-chip-510260
sell them on ebay as collectors items. then get antminer u-1 or u -2
March 12, 2014, 07:14:48 AM
Thanks doc!!! I appreciate it!
I am working on migrating from USB to higher hashrate hardware...... I think I will go with the proxy since I am already using BFG miner on the pool. Its just going to take me a bit....I spent what bit pennies I did have on some new hardware to do this....(BTW tigerdirect is pretty cool that they take BTC...too bad they don't post their prices in BTC).... I have one blade coming that I got off of flea bay for a steal.....but now I have to save my bit pennies again to get more hardware....hopefully one day I can get those big bitcoin rewards (yeah probably not due to the difficulty rise...)...
I am working on migrating from USB to higher hashrate hardware...... I think I will go with the proxy since I am already using BFG miner on the pool. Its just going to take me a bit....I spent what bit pennies I did have on some new hardware to do this....(BTW tigerdirect is pretty cool that they take BTC...too bad they don't post their prices in BTC).... I have one blade coming that I got off of flea bay for a steal.....but now I have to save my bit pennies again to get more hardware....hopefully one day I can get those big bitcoin rewards (yeah probably not due to the difficulty rise...)...
you want to save for an antminer s-1 they are very nice far far far better then a blade or a cube.
I decided that I would move back from btcguild.
I am now running 4 antminer s-1's around 720gh right here at the doc's.
I am hoping to expand to 6 or maybe 8 in the next month. this will have me at 1080- 1440gh.
March 12, 2014, 02:33:45 AM
Is the problem with bitfury devices only sending in some of their proofs of work fixed? Was there a firmware update or something like that?
Or is it still necessary to set a high difficulty or other tricks?
Or is it still necessary to set a high difficulty or other tricks?
Yes, I noticed 25GH higher work recently than the past few days. It was something the pool did. I'm back at 700GH.
I think if you are affected by the bitfury bug then your hashrate on the website drops to almost nothing because the bitfury only sends in a small fraction of its work. I'm not that familiar with it though - I don't have any bitfury cards.
Just noticed bitminter go down, but it's back up again, that's why I'm here. 
My client has been connected 5 days without being disconnected at all. Maybe that was a problem somewhere out on the interwebs.
March 11, 2014, 06:41:26 PM
Is the problem with bitfury devices only sending in some of their proofs of work fixed? Was there a firmware update or something like that?
Or is it still necessary to set a high difficulty or other tricks?
Or is it still necessary to set a high difficulty or other tricks?
Yes, I noticed 25GH higher work recently than the past few days. It was something the pool did. I'm back at 700GH.
Code:
2014-03-11 19:56 3h 59m 3,815,723,798 456.7 719.9 0.157641% 2,408,448
2014-03-11 15:56 4h 00m 3,815,723,798 455.6 703.4 0.154390% 2,359,808
2014-03-11 11:55 3h 59m 3,815,723,798 456.3 699.1 0.153216% 2,339,072
2014-03-11 07:55 4h 01m 3,815,723,798 452.8 697.9 0.154118% 2,353,920
2014-03-11 03:53 4h 02m 3,815,723,798 451.9 715.4 0.158296% 2,420,224
2014-03-10 23:51 4h 02m 3,815,723,798 452.5 705.0 0.155813% 2,384,384
2014-03-10 19:48 4h 02m 3,815,723,798 449.7 672.7 0.149597% 2,283,568
2014-03-10 15:45 4h 04m 3,815,723,798 447.3 683.7 0.152846% 2,336,256
2014-03-10 11:39 4h 04m 3,815,723,798 448.6 681.3 0.151871% 2,326,272
2014-03-10 07:34 4h 05m 3,815,723,798 445.9 677.1 0.151862% 2,322,432
2014-03-10 03:27 4h 07m 3,815,723,798 442.5 712.8 0.161067% 2,459,392
2014-03-09 23:20 4h 05m 3,815,723,798 446.6 688.6 0.154170% 2,361,956
2014-03-09 19:13 4h 05m 3,815,723,798 444.9 673.3 0.151312% 2,313,216
2014-03-09 15:06 4h 03m 3,815,723,798 450.0 684.0 0.151998% 2,326,016
2014-03-09 11:02 4h 03m 3,815,723,798 449.7 677.6 0.150670% 2,304,512
2014-03-09 06:58 4h 04m 3,815,723,798 447.3 676.9 0.151343% 2,314,752
2014-03-09 02:53 4h 06m 3,815,723,798 443.7 678.3 0.152880% 2,338,560
2014-03-08 22:46 4h 08m 3,815,723,798 442.5 679.1 0.153462% 2,354,432
2014-03-08 18:37 4h 07m 3,815,723,798 441.9 666.0 0.150722% 2,301,696
2014-03-08 14:29 4h 07m 3,815,723,798 441.6 672.2 0.152231% 2,323,968
Just noticed bitminter go down, but it's back up again, that's why I'm here.
March 11, 2014, 12:00:56 PM
Figures, I get some new hardware, and now we are on a block that is taking its time to build....getting tired of the daylong+ blocks.....they kill me....
Ditto. I add and blocks slow.
March 11, 2014, 09:40:26 AM
Can anyone from the pool help me with that ?
https://bitcointalksearch.org/topic/block-erupter-changing-the-chip-510260
https://bitcointalksearch.org/topic/block-erupter-changing-the-chip-510260
March 11, 2014, 09:27:52 AM
man, this block...
March 11, 2014, 09:15:23 AM
Figures, I get some new hardware, and now we are on a block that is taking its time to build....getting tired of the daylong+ blocks.....they kill me....
March 10, 2014, 09:40:55 PM
I got my proxy going today....so far everything is hasing good...thanks for the hint on using the proxy rather than the old getwork protocol
March 09, 2014, 10:42:01 AM
Is the problem with bitfury devices only sending in some of their proofs of work fixed? Was there a firmware update or something like that?
Or is it still necessary to set a high difficulty or other tricks?
Or is it still necessary to set a high difficulty or other tricks?
March 06, 2014, 03:04:31 AM
I stongly recommend a proxy for blades and cubes.
I tried it both ways: with getwork I got only 50% of the hashrate.
And after a few hints from the Doc I had the proxy installed in 10 min.
I tried it both ways: with getwork I got only 50% of the hashrate.
And after a few hints from the Doc I had the proxy installed in 10 min.
March 05, 2014, 06:38:29 PM
Thanks doc!!! I appreciate it!
I am working on migrating from USB to higher hashrate hardware...... I think I will go with the proxy since I am already using BFG miner on the pool. Its just going to take me a bit....I spent what bit pennies I did have on some new hardware to do this....(BTW tigerdirect is pretty cool that they take BTC...too bad they don't post their prices in BTC).... I have one blade coming that I got off of flea bay for a steal.....but now I have to save my bit pennies again to get more hardware....hopefully one day I can get those big bitcoin rewards (yeah probably not due to the difficulty rise...)...
I am working on migrating from USB to higher hashrate hardware...... I think I will go with the proxy since I am already using BFG miner on the pool. Its just going to take me a bit....I spent what bit pennies I did have on some new hardware to do this....(BTW tigerdirect is pretty cool that they take BTC...too bad they don't post their prices in BTC).... I have one blade coming that I got off of flea bay for a steal.....but now I have to save my bit pennies again to get more hardware....hopefully one day I can get those big bitcoin rewards (yeah probably not due to the difficulty rise...)...
March 05, 2014, 06:31:26 PM
I actually really like this pool, I came to this pool from slush's pool, I like the support and the updates from the good Dr.
My earlier question still stands though, I am wondering if I should set up a mining proxy for my incoming blade, or if I should just connect to the getwork protocol....
what are the pros and cons of both, since I know getwork is the system, and stratum is the new hotness (relatively).
My earlier question still stands though, I am wondering if I should set up a mining proxy for my incoming blade, or if I should just connect to the getwork protocol....
what are the pros and cons of both, since I know getwork is the system, and stratum is the new hotness (relatively).
Getwork: easier to set up but the blade/cube runs slowly.
Stratum proxy: more to set up, but the blade/cube runs at full speed.
How to set up ASICMiner cubes and blades:
https://bitcointalksearch.org/topic/m.3046129
March 05, 2014, 06:27:57 PM
I actually really like this pool, I came to this pool from slush's pool, I like the support and the updates from the good Dr.
My earlier question still stands though, I am wondering if I should set up a mining proxy for my incoming blade, or if I should just connect to the getwork protocol....
what are the pros and cons of both, since I know getwork is the system, and stratum is the new hotness (relatively).
My earlier question still stands though, I am wondering if I should set up a mining proxy for my incoming blade, or if I should just connect to the getwork protocol....
what are the pros and cons of both, since I know getwork is the system, and stratum is the new hotness (relatively).
March 05, 2014, 03:34:52 PM
I sent you a PM due to I don't want this thread to end up a sales thread, it contains quite a bit of useful info and don't want it to get hijacked...
March 05, 2014, 02:10:44 PM
I'd love to keep it in the family but I'm putting a bunch of block eruptors up on Ebay in the next couple days. They run 336 mh/s but I'm selling them in sets of 9 with an Anker Hub which should net you around 3 gh/s. Here is a link to one of my auctions that just ended.
http://www.ebay.com/itm/261406606655?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
There will be a few more coming out soon so let me know if you want me to send you the link.
http://www.ebay.com/itm/261406606655?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
There will be a few more coming out soon so let me know if you want me to send you the link.
Can't see the link
What's your seller name ?
Thx
March 05, 2014, 01:39:56 PM
I'd love to keep it in the family but I'm putting a bunch of block eruptors up on Ebay in the next couple days. They run 336 mh/s but I'm selling them in sets of 9 with an Anker Hub which should net you around 3 gh/s. Here is a link to one of my auctions that just ended.
http://www.ebay.com/itm/261406606655?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
There will be a few more coming out soon so let me know if you want me to send you the link.
http://www.ebay.com/itm/261406606655?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
There will be a few more coming out soon so let me know if you want me to send you the link.
Jump to: