Please tell me your suggestions
Thanks a lot! 
Topic: 1080Ti Specific - Best mining option - page 312. (Read 409677 times)
Hi. I've started for my first time mining yesterday. I am using a GTX 1080 Ti with genoil ethminer on minergate pool. The reported hashrate for ETH is around 30MH/s, but the income is very slow for now (seems to be hard for the minergate pool to find a block).
Please tell me your suggestions Thanks a lot!
Please tell me your suggestions
Thanks a lot! Do all of the 1080i's use 2 plugs? Just got a 1080 and was surprised it only needed one 8pin plug, compared to my 8+6 970. Thinking of getting a 1080ti to replace my 970.
Which 1080Ti is that and what is your hash rate?
I am using 1080's not 1080Ti's, as I didn't want to spend too much up front right now. I have 1 more card slot to fill or replace the 970.
Do all of the 1080i's use 2 plugs? Just got a 1080 and was surprised it only needed one 8pin plug, compared to my 8+6 970. Thinking of getting a 1080ti to replace my 970.
Which 1080Ti is that and what is your hash rate?
I am going to assume that all ti's do use atleast 2x8 pins, yes, i know mine does (Zotac AMP! Extreme)
The new MSI lightning X uses THREE 8 pin connectors
if i had one im not even sure i would want the cable headache, mining using those splitters sketches me out on this highpower cards ;p
The new MSI lightning X uses THREE 8 pin connectors
if i had one im not even sure i would want the cable headache, mining using those splitters sketches me out on this highpower cards ;pWith DGB I'm getting about $14 a day.
You can downclock your mem.
Hi,
Is it DGB-Skein and which pool?
What is your hash rate?
Skein on suprnova, getting 980MH/s
Nice hashrate.
What are your frequencies/TDP for those 980 MH/s?
900-1000 w
75%
+180-225
-500
Variance is due to I use about 14 different cards and they're all different, but honestly, not by much.
Biggest PIECE OF SHIT card is MSI Armor.
Fuck that card. Runs hot as shit - requires TWO 8 pins. not a 8+6
And it blows hot air the wrong fucking way.
It does hash higher, but that's most likely because it's OC'd to hell. I can't go past +180-90 without it crashing so I know it's OC'd heavy.
Yes, fuck tha card
Do all of the 1080i's use 2 plugs? Just got a 1080 and was surprised it only needed one 8pin plug, compared to my 8+6 970. Thinking of getting a 1080ti to replace my 970.
Guys,
I'm using the posted thread Alexis miner and I edited the batch file and inserted my Electrum wallet address.
When are supposed to get paid? there is no date nothing?
I saw on Nicehash miner- they show a pay out date. so far all I see in electrum wallet is Balance 0 BTC lol - I understand it'll be 0.001 or what not but still, when do we get paid ?
Also, wasn't Nicehash miner the best for nVidia cards?
I'm using the posted thread Alexis miner and I edited the batch file and inserted my Electrum wallet address.
When are supposed to get paid? there is no date nothing?
I saw on Nicehash miner- they show a pay out date. so far all I see in electrum wallet is Balance 0 BTC lol - I understand it'll be 0.001 or what not but still, when do we get paid ?
Also, wasn't Nicehash miner the best for nVidia cards?
post your bat file here, maybe something not correct.
Guys,
I'm using the posted thread Alexis miner and I edited the batch file and inserted my Electrum wallet address.
When are supposed to get paid? there is no date nothing?
I saw on Nicehash miner- they show a pay out date. so far all I see in electrum wallet is Balance 0 BTC lol - I understand it'll be 0.001 or what not but still, when do we get paid ?
Also, wasn't Nicehash miner the best for nVidia cards?
I'm using the posted thread Alexis miner and I edited the batch file and inserted my Electrum wallet address.
When are supposed to get paid? there is no date nothing?
I saw on Nicehash miner- they show a pay out date. so far all I see in electrum wallet is Balance 0 BTC lol - I understand it'll be 0.001 or what not but still, when do we get paid ?
Also, wasn't Nicehash miner the best for nVidia cards?
I'll put my little piece in here since everyone's doing it.
I've mined with Yiimp's DGB Skein algo, and at full TDP, stock settings I get averaged 1057Mh/s, If I undervolted the card to about 44% TDP(124W) I'd average 850-920Mh/s with -504 on the memory and +150 on the core.
The card I'm using is the EVGA FTW3 GTX 1080 Ti as seen here - https://i.imgur.com/4Hehs2Y.jpg
I've decided that mining skein wasn't profitable for me so I'm mainly mining ZClassic, ZCash, and GroestlCoin.(Averaging $10-$15 per day depending on coin value)
I've mined with Yiimp's DGB Skein algo, and at full TDP, stock settings I get averaged 1057Mh/s, If I undervolted the card to about 44% TDP(124W) I'd average 850-920Mh/s with -504 on the memory and +150 on the core.
The card I'm using is the EVGA FTW3 GTX 1080 Ti as seen here - https://i.imgur.com/4Hehs2Y.jpg
I've decided that mining skein wasn't profitable for me so I'm mainly mining ZClassic, ZCash, and GroestlCoin.(Averaging $10-$15 per day depending on coin value)
wow thats nice for skein, i wish equihash took less power being given to it as well as that haha
You aren't finding LBRY more profitable?
I find for 520mh/s LBRY VS 750 sol/s equihash LBC is more profitable with last few days rise?
So I currently have 5 of these 1080ti cards - MSI GeForce GTX 1080 Ti DirectX 12 GeForce GTX 1080 TI ARMOR 11G OC 11GB 352-Bit
http://www.ebay.com/itm/382016280684?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Currently have 4 (hope to add a 5th using the M.2 port) of them in the mining rig using nemos-zpool and trying to get the cards stable. Haven't done any setting tweaks yet. Will startup nemos and sometimes the rig will start mining for a few minutes other times only a handful of seconds and then the box will reboot. Currently using nemos-1.7.4 and will try the latest 1.7.6 to see if this fixes any issues.
Anyone using this card and/or has some tweaks for it? Trying to get nemos-zpool to work, but open to others software/pools if I can't get my cards stable.
Goal is to mine most profitable coins and then switch/store to BTC/ETH/Dash.
Thanks.
http://www.ebay.com/itm/382016280684?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Currently have 4 (hope to add a 5th using the M.2 port) of them in the mining rig using nemos-zpool and trying to get the cards stable. Haven't done any setting tweaks yet. Will startup nemos and sometimes the rig will start mining for a few minutes other times only a handful of seconds and then the box will reboot. Currently using nemos-1.7.4 and will try the latest 1.7.6 to see if this fixes any issues.
Anyone using this card and/or has some tweaks for it? Trying to get nemos-zpool to work, but open to others software/pools if I can't get my cards stable.
Goal is to mine most profitable coins and then switch/store to BTC/ETH/Dash.
Thanks.
Well there's your problem right there
"MSI ARMOR" those things OC like shit, worse series of them all imo, not much to tell ya :/Apologies if this is a really stupid question but I'm a newbie and am just in the process of ordering / building my rig.
Can you mine multiple coins on each card (say 80% used for one coin and 20% on another)? If so, do they have to use the same algo?
And can you do the above for each card that you own? e.g. if I have 2 x 1080Ti's can I mine 6 different coins?
It's called hedging my bets ;-)
Can you mine multiple coins on each card (say 80% used for one coin and 20% on another)? If so, do they have to use the same algo?
And can you do the above for each card that you own? e.g. if I have 2 x 1080Ti's can I mine 6 different coins?
It's called hedging my bets ;-)
you cant split your card custom, you will just share resources running multiple instances (and yes it can be differnet algos)
So I currently have 5 of these 1080ti cards - MSI GeForce GTX 1080 Ti DirectX 12 GeForce GTX 1080 TI ARMOR 11G OC 11GB 352-Bit
http://www.ebay.com/itm/382016280684?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Currently have 4 (hope to add a 5th using the M.2 port) of them in the mining rig using nemos-zpool and trying to get the cards stable. Haven't done any setting tweaks yet. Will startup nemos and sometimes the rig will start mining for a few minutes other times only a handful of seconds and then the box will reboot. Currently using nemos-1.7.4 and will try the latest 1.7.6 to see if this fixes any issues.
Anyone using this card and/or has some tweaks for it? Trying to get nemos-zpool to work, but open to others software/pools if I can't get my cards stable.
Goal is to mine most profitable coins and then switch/store to BTC/ETH/Dash.
Thanks.
http://www.ebay.com/itm/382016280684?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Currently have 4 (hope to add a 5th using the M.2 port) of them in the mining rig using nemos-zpool and trying to get the cards stable. Haven't done any setting tweaks yet. Will startup nemos and sometimes the rig will start mining for a few minutes other times only a handful of seconds and then the box will reboot. Currently using nemos-1.7.4 and will try the latest 1.7.6 to see if this fixes any issues.
Anyone using this card and/or has some tweaks for it? Trying to get nemos-zpool to work, but open to others software/pools if I can't get my cards stable.
Goal is to mine most profitable coins and then switch/store to BTC/ETH/Dash.
Thanks.
Apologies if this is a really stupid question but I'm a newbie and am just in the process of ordering / building my rig.
Can you mine multiple coins on each card (say 80% used for one coin and 20% on another)? If so, do they have to use the same algo?
And can you do the above for each card that you own? e.g. if I have 2 x 1080Ti's can I mine 6 different coins?
It's called hedging my bets ;-)
Can you mine multiple coins on each card (say 80% used for one coin and 20% on another)? If so, do they have to use the same algo?
And can you do the above for each card that you own? e.g. if I have 2 x 1080Ti's can I mine 6 different coins?
It's called hedging my bets ;-)
You can set multiple miner instances, each for a different card/s with different algos and coins.
Apologies if this is a really stupid question but I'm a newbie and am just in the process of ordering / building my rig.
Can you mine multiple coins on each card (say 80% used for one coin and 20% on another)? If so, do they have to use the same algo?
And can you do the above for each card that you own? e.g. if I have 2 x 1080Ti's can I mine 6 different coins?
It's called hedging my bets ;-)
Can you mine multiple coins on each card (say 80% used for one coin and 20% on another)? If so, do they have to use the same algo?
And can you do the above for each card that you own? e.g. if I have 2 x 1080Ti's can I mine 6 different coins?
It's called hedging my bets ;-)
I'm with a multi algo nemosmimer but thinking of change to a single coin. I'm really insterested in your daily profit with each 1080 ti, 14$ in dgb sounds not bad
Now I'm very confused (what else is new)
Not sure if we should continue with DGB or mine ZEC?
What are you guys running?
Not sure if we should continue with DGB or mine ZEC?
What are you guys running?
With DGB I'm getting about $14 a day.
You can downclock your mem.
Hi,
Is it DGB-Skein and which pool?
What is your hash rate?
Skein on suprnova, getting 980MH/s
Nice hashrate.
What are your frequencies/TDP for those 980 MH/s?
900-1000 w
75%
+180-225
-500
Variance is due to I use about 14 different cards and they're all different, but honestly, not by much.
Biggest PIECE OF SHIT card is MSI Armor.
Fuck that card. Runs hot as shit - requires TWO 8 pins. not a 8+6
And it blows hot air the wrong fucking way.
It does hash higher, but that's most likely because it's OC'd to hell. I can't go past +180-90 without it crashing so I know it's OC'd heavy.
Yes, fuck tha card
Mine's the MSI Gaming X version, love that card. Runs quiet, and even in 31C ambient it doesn't go above 62C
I have 3 of the Gigabyte AORUS 1080ti coming, definitely some good info here! going to test these real world vs my current 1070's to figure out which way to go for a few more builds.
I'll put my little piece in here since everyone's doing it.
I've mined with Yiimp's DGB Skein algo, and at full TDP, stock settings I get averaged 1057Mh/s, If I undervolted the card to about 44% TDP(124W) I'd average 850-920Mh/s with -504 on the memory and +150 on the core.
The card I'm using is the EVGA FTW3 GTX 1080 Ti as seen here - https://i.imgur.com/4Hehs2Y.jpg
I've decided that mining skein wasn't profitable for me so I'm mainly mining ZClassic, ZCash, and GroestlCoin.(Averaging $10-$15 per day depending on coin value)
I've mined with Yiimp's DGB Skein algo, and at full TDP, stock settings I get averaged 1057Mh/s, If I undervolted the card to about 44% TDP(124W) I'd average 850-920Mh/s with -504 on the memory and +150 on the core.
The card I'm using is the EVGA FTW3 GTX 1080 Ti as seen here - https://i.imgur.com/4Hehs2Y.jpg
I've decided that mining skein wasn't profitable for me so I'm mainly mining ZClassic, ZCash, and GroestlCoin.(Averaging $10-$15 per day depending on coin value)
I'm averaging $14 a day on DGB skein. So you're saying using the CUDAminer and going zcash is better?
Well, during huge eth growth 38mhs eth + 1200 sia was not bad also ))
Alright, thanks for the info.
Today I got an EVGA 1080ti SC and with 85% TDP and +150 core I only managed to squeeze about 930-35 Mh/s on Skein.
I haven't touched voltage yet so will continue to do some tests tomorrow.
Today I got an EVGA 1080ti SC and with 85% TDP and +150 core I only managed to squeeze about 930-35 Mh/s on Skein.
I haven't touched voltage yet so will continue to do some tests tomorrow.
With DGB I'm getting about $14 a day.
You can downclock your mem.
Hi,
Is it DGB-Skein and which pool?
What is your hash rate?
Skein on suprnova, getting 980MH/s
Nice hashrate.
What are your frequencies/TDP for those 980 MH/s?
900-1000 w
75%
+180-225
-500
Variance is due to I use about 14 different cards and they're all different, but honestly, not by much.
Biggest PIECE OF SHIT card is MSI Armor.
Fuck that card. Runs hot as shit - requires TWO 8 pins. not a 8+6
And it blows hot air the wrong fucking way.
It does hash higher, but that's most likely because it's OC'd to hell. I can't go past +180-90 without it crashing so I know it's OC'd heavy.
Yes, fuck tha card
With DGB I'm getting about $14 a day.
You can downclock your mem.
Hi,
Is it DGB-Skein and which pool?
What is your hash rate?
Skein on suprnova, getting 980MH/s
Nice hashrate.
What are your frequencies/TDP for those 980 MH/s?
Will need to check once I'm home. The GPU clock automatically goes up to 1850 but I'll check the TDP. Temperature is 62C though.
Jump to: