[1423GH] ABCPool PPS - Proxy Pool For High & Steady Mining Rewards - page 17.

MintCondition

legendary

Activity: 1147

Merit: 1007

Quote from: Dalkore on June 14, 2012, 12:36:03 PM

Does ABC support donation less that 1%?

The scale shows 0-100% and if I try to do a value less that 1% then it changes it to 1%. If that is the minimum, you should just update the page and state that clearly. Please advise

We've been phasing out donations, because there have only ever been a handful of people that donated anyway. If you're having trouble resetting your donation amount, Please PM me your desired donation percentage and I'll set it manually for you.

Dalkore

legendary

Activity: 1330

Merit: 1026

Mining since 2010 & Hosting since 2012

Does ABC support donation less that 1%?

The scale shows 0-100% and if I try to do a value less that 1% then it changes it to 1%. If that is the minimum, you should just update the page and state that clearly. Please advise

bal3wolf

sr. member

Activity: 476

Merit: 250

Power to the people!

is the pool messing up for others my workers says its connected but not showing on the site and i had to stop them all and start cause they had all went to the backup pool.

working right now but the 6950 will leave every few hrs to days and go to its backup.

Dhomochevsky

sr. member

Activity: 242

Merit: 251

A few months ago I pointed 6 or 7 of my workers to ABCPool. Everything went perfectly fine for a while, when suddenly, one day I opened my account to see that my workers were blocked from the pool temporarily. The pool said that I might be running a botnet. Thinking it was just some snag I waited out the bans, which expired after some time and my workers resumed mining. After a couple of hours they got blocked again. That's when I pulled them off ABCPool and returned to my usual pools. Currently I'm mining with my workers in some other private pools and p2pool.

Thing is, if I point my miners back at ABCPool, what are the odds of this happening again? And what might have caused it in the first place?

Every worker exits through the same IP BTW.

[edit] Nevermind, I see this has been asked before.

bal3wolf

sr. member

Activity: 476

Merit: 250

Power to the people!

for some reason my 6950 refuses to stay on this pool but works fine on ozcoin every few hrs it will disconnect from abc and go to the backup pool and never comes back. Has had this problem with differt clients also.

rjk

sr. member

Activity: 448

Merit: 250

1ngldh

Quote from: kano on June 04, 2012, 06:39:10 AM

Of course, be wary of what pools you use as backup pools.
The idea of a backup pool is a reliable fall back when your main pools fails.
However, if the backup pool blocks your access while it is just a backup ... well ...

That's why one backup isn't enough. I have 3...

kano

legendary

Activity: 4592

Merit: 1851

Linux since 1997 RedHat 4

Of course, be wary of what pools you use as backup pools.
The idea of a backup pool is a reliable fall back when your main pools fails.
However, if the backup pool blocks your access while it is just a backup ... well ...

MintCondition

legendary

Activity: 1147

Merit: 1007

Quote from: Fuzzy on June 02, 2012, 04:05:42 PM

Quote

Temporary block. You are requesting too much getworks per submitted share. This can happen if you run a CPU miner or a botnet, or in certain cases with Phoenix miner. The ratio is dynamic to keep average pool effiency at a certain level, so you may try mining again later.

I've been getting this over the last few days. I've been mining for months and this just started.

Thanks for your reports. We've been getting more reports of seemingly random blocking recently, so we've taken another look at the blocking mechanism. The increase in FPGA mining caused the pool to become stricter in enforcing blocks. An additional constraint has now been added, again making it less likely for well-behaved miners to be penalized like this. Don't hesitate to PM us if you still feel you're being blocked without misbehaving.

Happy hashing,
MC

Fuzzy

hero member

Activity: 560

Merit: 500

Quote

Temporary block. You are requesting too much getworks per submitted share. This can happen if you run a CPU miner or a botnet, or in certain cases with Phoenix miner. The ratio is dynamic to keep average pool effiency at a certain level, so you may try mining again later.

I've been getting this over the last few days. I've been mining for months and this just started.

c_k

donator

Activity: 242

Merit: 100

Of course that's different ;-)

The00Dustin

hero member

Activity: 807

Merit: 500

Quote from: c_k on May 30, 2012, 07:33:02 PM

this is why walls of text aren't good page design Tongue

No offense, but if you can't read, what are you doing on a forum?

ETA: My point here is that a forum is both a wall of text and a website.

c_k

donator

Activity: 242

Merit: 100

lol, you're right... this is why walls of text aren't good page design Tongue

thanks

Tittiez

hero member

Activity: 686

Merit: 500

Quote from: c_k on May 30, 2012, 04:10:44 PM

What's a share worth here? I must be missing something simple on the website

Your are.

c_k

donator

Activity: 242

Merit: 100

What's a share worth here? I must be missing something simple on the website

gmannn

full member

Activity: 148

Merit: 100

I'm having a similar problem, 16 workers for about 4.2 GH/s. Mostly 5xxx series cards. Guiminer on openCL for 12 workers, and phx on linuxcoin for 4. All on the same IP though. I was just blocked for the first time today, so maybe it was a temporary glitch?

user gmannn

Quote from: demkd on May 29, 2012, 08:14:46 PM

One of my IPs constantly locked out, something wrong with your strange ip blocking policy.
I have only 2 PC with 3 cards (total) mining (cgminer 2.4.1) from same ip (router with NAT).
I think it's not acceptable.
If you want to look to this issue there are my login: classic729

demkd

full member

Activity: 242

Merit: 100

One of my IPs constantly locked out, something wrong with your strange ip blocking policy.
I have only 2 PC with 3 cards (total) mining (cgminer 2.4.1) from same ip (router with NAT).
I think it's not acceptable.
If you want to look to this issue there are my login: classic729

rjk

sr. member

Activity: 448

Merit: 250

1ngldh

Quote from: interlagos on May 29, 2012, 12:11:32 PM

Do you have any idea why ABCpool is not on the hashrate chart on bitcoincharts.com?
At >700 Ghs it should be there somewhere in the middle.

They don't publish block stats because some or all of the work is proxied to real pools.

interlagos

hero member

Activity: 496

Merit: 500

Do you have any idea why ABCpool is not on the hashrate chart on bitcoincharts.com?
At >700 Ghs it should be there somewhere in the middle.

af_newbie

legendary

Activity: 2702

Merit: 1468

Quote from: MintCondition on May 24, 2012, 04:25:39 PM

The payment bitcoind has reinitialized, payments are back online.

Enjoy!

MC

MC, I had a problem with my payment today.
Check PM for details.

MintCondition

legendary

Activity: 1147

Merit: 1007

Quote from: af_newbie on May 25, 2012, 01:34:41 PM

Quote from: MintCondition on May 24, 2012, 04:25:39 PM

The payment bitcoind has reinitialized, payments are back online.

Enjoy!

MC

MC, I had a problem with my payment today.
Check PM for details.

Hi Petervii,

Thanks for your report. I've looked into it for you, and the transaction mentioned in your PM was successful. I've sent you the blockexplorer link to the transaction in a PM.

A little background: After submitting a transaction to the network, it needs to be verified through inclusion in the blockchain. While a new block is found every 10 minutes on average, some blocks take quite a bit longer. In this case, it took 50 minutes between your payment request and the time the next block was found by the Bitcoin network. That might be why you could not find a reference to the payment.

Hope this helps,
MC

Topic: [1423GH] ABCPool PPS - Proxy Pool For High & Steady Mining Rewards - page 17. (Read 151781 times)